Sensors 2016, 16(7), 1029; https://doi.org/10.3390/s16071029
On the Use of a Signal Quality Index Applying at Tracking Stage Level to Assist the RAIM System of a GNSS Receiver
Politecnico di Torino—Corso Duca degli Abruzzi 24, Torino 10129, Italy
*
Author to whom correspondence should be addressed.
Received: 6 May 2016 / Revised: 23 June 2016 / Accepted: 27 June 2016 / Published: 2 July 2016
(This article belongs to the Section Remote Sensors)
Abstract
In this work, a novel signal processing method is proposed to assist the Receiver Autonomous Integrity Monitoring (RAIM) module used in a receiver of Global Navigation Satellite Systems (GNSS) to improve the integrity of the estimated position. The proposed technique represents an evolution of the Multipath Distance Detector (MPDD), thanks to the introduction of a Signal Quality Index (SQI), which is both a metric able to evaluate the goodness of the signal, and a parameter used to improve the performance of the RAIM modules. Simulation results show the effectiveness of the proposed method. View Full-TextKeywords:
Global Navigation Satellite System (GNSS); signal processing; Receiver Autonomous Integrity Monitoring (RAIM); integrity
▼
Figures
Figure 1
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
Berardo, M.; Lo Presti, L. On the Use of a Signal Quality Index Applying at Tracking Stage Level to Assist the RAIM System of a GNSS Receiver. Sensors 2016, 16, 1029.
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.