Next Article in Journal
Multi-Channel Hyperspectral Fluorescence Detection Excited by Coupled Plasmon-Waveguide Resonance
Next Article in Special Issue
A Wide Spectral Range Reflectance and Luminescence Imaging System
Previous Article in Journal
Development of a Real Time Sparse Non-Negative Matrix Factorization Module for Cochlear Implants by Using xPC Target
Previous Article in Special Issue
Tip-Enhanced Raman Imaging and Nano Spectroscopy of Etched Silicon Nanowires
Article Menu

Export Article

Open AccessArticle
Sensors 2013, 13(10), 13879-13891; doi:10.3390/s131013879

A Fast Smoothing Algorithm for Post-Processing of Surface Reflectance Spectra Retrieved from Airborne Imaging Spectrometer Data

Remote Sensing Division, Code 7232, Naval Research Laboratory, Washington, DC 20375, USA
Software Branch, Field System Operation Center, NOAA, Silver Spring, MD 20910, USA
Author to whom correspondence should be addressed.
Received: 20 August 2013 / Revised: 26 September 2013 / Accepted: 29 September 2013 / Published: 14 October 2013
(This article belongs to the Special Issue Spectral Imaging at the Microscale and Beyond)
View Full-Text   |   Download PDF [769 KB, uploaded 21 June 2014]   |  


Surface reflectance spectra retrieved from remotely sensed hyperspectral imaging data using radiative transfer models often contain residual atmospheric absorption and scattering effects. The reflectance spectra may also contain minor artifacts due to errors in radiometric and spectral calibrations. We have developed a fast smoothing technique for post-processing of retrieved surface reflectance spectra. In the present spectral smoothing technique, model-derived reflectance spectra are first fit using moving filters derived with a cubic spline smoothing algorithm. A common gain curve, which contains minor artifacts in the model-derived reflectance spectra, is then derived. This gain curve is finally applied to all of the reflectance spectra in a scene to obtain the spectrally smoothed surface reflectance spectra. Results from analysis of hyperspectral imaging data collected with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data are given. Comparisons between the smoothed spectra and those derived with the empirical line method are also presented. View Full-Text
Keywords: remote sensing; sensors; spectroscopy; smoothing; surface reflectance remote sensing; sensors; spectroscopy; smoothing; surface reflectance

This is an open access article distributed under the Creative Commons Attribution License (CC BY 3.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Gao, B.-C.; Liu, M. A Fast Smoothing Algorithm for Post-Processing of Surface Reflectance Spectra Retrieved from Airborne Imaging Spectrometer Data. Sensors 2013, 13, 13879-13891.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Sensors EISSN 1424-8220 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top