The Science and Technology of 3D Printing

doi:10.3390/books978-3-0365-2584-6

Format

Hardback

License and Copyright

Keywords

metal additive manufacturing; directed energy deposition; alloy design; elemental powder mixture; advanced materials; composition control; porosity; additive technology; SLM; computer tomography; additive manufacture; SLM Ti-6Al-4V; variability; anisotropy; fatigue crack growth; Ti-6Al-4V alloy; laser powder bed fusion; powder bed temperature; microstructure evolution; mechanical properties; laser powder bed fusion; additive manufacturing; pore; pulsed emission; X-ray imaging; non-spherical; hydride-dehydride (HDH) Ti-6Al-4V powder; laser powder bed fusion; post-process heat treatment; microstructure; mechanical properties; ductile fracture; stress state; Ti-6Al-4V; 316L stainless steel; laser powder bed fusion; additive manufacturing; soft materials; smart materials; stretchable devices; FRP; 3D printing; defense; FDM; topology optimization; neural network; neural style transfer; additive manufacturing; binder jetting; sands; vacuum thermoforming; fiber reinforced composite; n/a

Reprint

Download Flyer

The Science and Technology of 3D Printing

Edited by

December 2021

216 pages

ISBN978-3-0365-2585-3 (Hardback)
ISBN978-3-0365-2584-6 (PDF)

https://doi.org/10.3390/books978-3-0365-2584-6

Free Download (PDF)

This is a Reprint of the Special Issue The Science and Technology of 3D Printing that was published in

Chemistry & Materials Science

Engineering

Physical Sciences

Summary

Three-dimensional printing, or additive manufacturing, is an emerging manufacturing process. Research and development are being performed worldwide to provide a better understanding of the science and technology of 3D printing to make high-quality parts in a cost-effective and time-efficient manner. This book includes contemporary, unique, and impactful research on 3D printing from leading organizations worldwide.