Reprint
Development of Unconventional Reservoirs
Edited by
April 2020
522 pages
- ISBN978-3-03928-580-8 (Hardback)
- ISBN978-3-03928-581-5 (PDF)
This book is a reprint of the Special Issue Development of Unconventional Reservoirs that was published in
Chemistry & Materials Science
Engineering
Environmental & Earth Sciences
Physical Sciences
Summary
The need for energy is increasing and but the production from conventional reservoirs is declining quickly. This requires an economically and technically feasible source of energy for the coming years. Among some alternative future energy solutions, the most reasonable source is from unconventional reservoirs. As the name “unconventional” implies, different and challenging approaches are required to characterize and develop these resources. This Special Issue covers some of the technical challenges for developing unconventional energy sources from shale gas/oil, tight gas sand, and coalbed methane.
Format
- Hardback
License
© 2020 by the authors; CC BY-NC-ND license
Keywords
CO2 huff-n-puff; condensate recovery; shale gas condensate reservoir; fractured tight reservoir; stress-dependent permeability; fracture penetration extent; theoretical model; shale gas; multi-stage fracturing horizontal wells; well interference; transient pressure; numerical analysis; shale gas; methane adsorption capacity; Langmuir volume; Langmuir pressure; total organic carbon; clay content; coal rank; petrophysical properties; coalbed methane; adsorption capacity; Niutitang formation; TOC recovery; organic pores; porosity; pore structure; unconventional reservoirs; gravel pack; sand control; gradation optimization; visual experiment; coal measure gases (coalbed gas; shale gas; and tight sand gas); co-exploitation; wellbore stability; wettability; zeta potential; drilling fluid; adsorption and desorption isotherms; sorption hysteresis; medium volatile bituminous coal; equation of state; NIST-Refprop; gas compressibility factors; original gas in-place; gas shale; NMR; helium porosimetry; clay bound water; porosity; pore size distribution; low-pressure gas adsorption; MICP; tight gas reservoirs; Klinkenberg slippage theory; high pressure and low flowrate; gas permeability measurement; adsorption; unconventional reservoirs; pulse decay test; unsteady state non-equilibrium sorption; pseudo-steady-state non-equilibrium sorption; equilibrium sorption; capillary number; initial water saturation; capillary trapping; residual gas distribution; nuclear magnetic resonance; ultra-deep well; shock loads; perforated string; safety analysis; optimization measures; convolutional neural network; well testing; tight reservoirs; pressure derivative; automatic classification; air flooding; catalyst-activated low temperature oxidation; oxidation reaction pathway; catalytic oxidation characteristics; Changqing tight oil; organic-rich shale; gas adsorption and desorption; sorption hysteresis; Langmuir model; compositional 3D; dual-porosity system; total organic carbon (TOC); Computer Modelling Group (CMG); GEM®; coalbed methane; gas content; diffusion coefficient; reservoir simulation; deepwater well; perforation safety; peak pressure; numerical model; orthogonal test; limestone and calcareous mudstone interbedding; gas content; source-mixed gas; fractures; northern Guizhou; water imbibition; oil migration; tight oil reservoirs; nuclear magnetic resonance; semi-analytical model; reorientation fractures; horizontal well; tight reservoir; flow behavior; tight gas sand; unconventional; porosity–permeability; hydraulic flow units; electrical resistivity; NMR; micro-CT image; petrophysics; petrography; carbon dioxide sequestration; caprock integrity; shale alteration; rock-water-CO2 interaction; lab tests under reservoir condition; fractured-vuggy reservoirs; physical model; water flooding effect; injection and production pattern; gravity differentiation; flow channel