Reprint

Catalytic Biomass to Renewable Biofuels and Biomaterials

Edited by
July 2020
208 pages
  • ISBN978-3-03936-312-4 (Hardback)
  • ISBN978-3-03936-313-1 (PDF)

This book is a reprint of the Special Issue Catalytic Biomass to Renewable Biofuels and Biomaterials that was published in

Chemistry & Materials Science
Engineering
Summary

Biomass is the only renewable carbon source that can be converted into high value-added carbon products. This book presents a collection of studies on the conversion of catalytic biomass to renewable biofuels and biomaterials by chemical conversion, co-combustion technology, and biological conversion technology. The fundamentals and mechanisms of catalytic materials design, process optimization, product development, and by-product utilization are outlined. All articles were contributed by experts in catalysis and bioenergy fields to provide readers with a broad range of perspectives on cutting-edge applications. This book is an ideal reference guide for academic researchers and engineering technicians in the fields of catalytic material synthesis, biomass energy conversion, enzyme catalysis, pyrolysis, combustion, vaporization, and fermentation. It can also be used as a comprehensive reference source for university students in renewable energy science and engineering, agricultural engineering, thermal engineering, chemical engineering, material science, and environmental engineering. This book contains 12 articles: (1) “Catalytic Biomass to Renewable Biofuels and Biomaterials”; (2) “Experimental Design to Improve Cell Growth and Ethanol Production in Syngas Fermentation by Clostridium carboxidivorans”; (3) “Glycerol Acetylation Mediated by Thermally Hydrolysed Biosolids-Based Material”; (4) “Influence of Base-Catalyzed Organosolv Fractionation of Larch Wood Sawdust on Fraction Yields and Lignin Properties”; (5) “Ca-based Catalysts for the Production of High-Quality Bio-Oils from the Catalytic Co-Pyrolysis of Grape Seeds and Waste Tyres”; (6) “Synthesis of Diesel and Jet Fuel Range Cycloalkanes with Cyclopentanone and Furfural”; (7) “Gel-Type and Macroporous Cross-Linked Copolymers Functionalized with Acid Groups for the Hydrolysis of Wheat Straw Pretreated with an Ionic Liquid”; (8) “Role of Humic Acid Chemical Structure Derived from Different Biomass Feedstocks on Fe(III) Bioreduction Activity: Implication for Sustainable Use of Bioresources”; (9) “Selective Production of Terephthalonitrile and Benzonitrile via Pyrolysis of Polyethylene Terephthalate (PET) with Ammonia over Ca(OH)2/Al2O3 Catalysts”; (10) “Experimental Studies on Co-Combustion of Sludge and Wheat Straw”; (11) “Carbonate-Catalyzed Room-Temperature Selective Reduction of Biomass-Derived 5-Hydroxymethylfurfural into 2,5-Bis(hydroxymethyl)furan”; (12) “Clostridium sp. as Bio-Catalyst for Fuels and Chemicals Production in a Biorefinery Context”.

Format
  • Hardback
License
© 2020 by the authors; CC BY-NC-ND license
Keywords
biomass conversion; biofuels; hydrogenation; green chemistry; sustainable catalysis; sludge; wheat straw; co-combustion; thermodynamic calculation; benzonitrile; terephthalonitrile; polyethylene terephthalate (PET); catalytic pyrolysis; ammonia; Ca(OH)2/Al2O3; Humic acid; Bioreduction of dissimilatory Fe(III); Shewanella oneidensis MR-1; Redox-active structures; Composts from different sources; heterogeneous catalysts; ionic liquid; lignocellulosic biomass; acidic resin catalysts; high density fuel; cyclopentanone; furfural; aldol condensation; hydrodeoxygenation; Clostridium sp.; fuels; ethanol; butanol; acetone; 1,3-propanediol; biorefinery; biomass; co-pyrolysis; biomass; waste tyres; bio-oils; Ca-based catalyst; auger reactor; lignin; organosolv; fractionation; European larch; characterization; biosolids; esterification; glycerol conversion; heterogeneous catalysis; syngas fermentation; Clostridium carboxidivorans; biomass production; ethanol; experimental design; anaerobic process; n/a