Reprint
Characterisation and Modelling of Manufacturing–Microstructure–Property–Mechanism Relationship for Advanced and Emerging Materials
Edited by
April 2023
298 pages
- ISBN978-3-0365-7389-2 (Hardback)
- ISBN978-3-0365-7388-5 (PDF)
This is a Reprint of the Special Issue Characterisation and Modelling of Manufacturing–Microstructure–Property–Mechanism Relationship for Advanced and Emerging Materials that was published in
Chemistry & Materials Science
Engineering
Physical Sciences
Summary
This reprint is a collection of papers published in a Special Issue that collected the recent advances within and investigations of the research fields of manufacturing and the characterisations or modelling of materials. The variety and quality of all these papers are addressed to both academic and industrial researchers who are looking for new information that can contribute to the advancement of future research in these highly challenging fields.
Format
- Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
ATIG welding; mixing design method; particle swarm optimization (PSO); pseudo-ternary flux; 316L SS; mathematical modeling; mechanical properties; microstructure; dynamic deformation behavior; Cowper-Symonds model; texture; Hall–Petch relationship; microstructure; textile signal lines; textronic systems; data transmission over textiles; smart textiles; characteristic impedance; signal quality tests; smart garments; e-textiles; steel bar structures; parametric design; genetic algorithms; structural optimization; lightweight structures; manufacturing and processing; laminated composite double-cylindrical shell system; improved Fourier series; Rayleigh–Ritz method; free vibration; steady-state response; hydrogen embrittlement; nanograined materials; intergranular deformation; brittle fracture; grain refinement; magnesium alloy AZ91; short carbon fibers; microstructure; compressive strength; wear resistance; wear mechanisms; wear debris; hydrogen; hydrogen fuel cell; depressurization; orifice plate structure; computational fluid dynamics; numerical model; roughness surface; morphological characterization; characterization parameter set; redundant parameter set; ISO25178; face gears; 3D optical scanning; point clouds; tooth surface deviations; loaded tooth contact analysis; meshfree method; laminated composite shell; rotating shell; free vibration analysis; thermal effect; Rayleigh–Ritz technology; laminated submarine-like model; annular plate; vibration analysis; molecular dynamics; hydrogen embrittlement; dislocation nucleation; plastic deformation; aluminum alloys; AA6082-T6; AA2011-T6; friction stir spot welding; friction stir deposition; keyhole refilling; mechanical properties; ultrasonic-assisted thermal forming; ultrasonic softening effect; stress reduction amplitude; evolution of microstructure; AZ91D magnesium alloy; laser cladding; Al-Si + Y2O3 coating; tribological property; wear resistance; corrosion resistance; n/a