Reprint

Advances in Understanding of Unit Operations in Non-ferrous Extractive Metallurgy 2021

Edited by
July 2022
266 pages
  • ISBN978-3-0365-4573-8 (Hardback)
  • ISBN978-3-0365-4574-5 (PDF)

This is a Reprint of the Special Issue Advances in Understanding of Unit Operations in Non-ferrous Extractive Metallurgy 2021 that was published in

Chemistry & Materials Science
Engineering
Summary

Unit metallurgical operations processes are usually separated into three categories: 1) hydrometallurgy (leaching, mixing, neutralization, precipitation, cementation, and crystallization); 2) pyrometallurgy (roasting and smelting); and 3) electrometallurgy (aqueous electrolysis and molten salt electrolysis). In hydrometallurgy, the aimed metal is first transferred from ores and concentrates to a solution using a selective dissolution (leaching or dry digestion) under an atmospheric pressure below 100 °C and under a high pressure (40-50 bar) and high temperature (below 270°C) in an autoclave. The purification of the obtained solution was performed using neutralization agents such as sodium hydroxide and calcium carbonate or more selective precipitation agents such as sodium carbonate and oxalic acid. The separation of metals is possible using a liquid/liquid process (solvent extraction in mixer-settler) and solid–liquid (filtration in filter-press under high pressure). Crystallization is the process by which a metallic compound is converted from a liquid into a solid crystalline state via a supersaturated solution. The final step is metal production using electrochemical methods (aqueous electrolysis for basic metals such as copper, zinc, silver, and molten salt electrolysis for rare earth elements and aluminum). Advanced processes, such as ultrasonic spray pyrolysis and microwave-assisted leaching, can be combined with reduction processes in order to produce metallic powders.

Related Books

January 2022

Advances in Selective Flotation and Leaching Process in Metallurgy

Environmental & Earth Sciences
...
September 2021

Advances in Mineral Processing and Hydrometallurgy

Chemistry & Materials Science
...
May 2020

Advances in Hydrometallurgy

Engineering