Casting Alloy Design and Characterization

doi:10.3390/books978-3-7258-3525-6

Format

Hardback

License and Copyright

Keywords

high-entropy alloy; thermo-calc calculation; casting; microstructure analysis; hardness measurements; casting; solidification; microstructure; properties; characterization; casting design; cast alloys; bells; silicon; bronze; 3D printing; wax casting; Al-33Cu-Be alloys; directional solidification; microstructure; hardness; aluminum alloys; microstructure; mechanical properties; precipitates; erbium; yttrium; hypoeutectic Al–Cu–Cr alloys; solidification; microstructure; hardness; sliding wear; EIS; equivalent circuit; Zr-doped; high-entropy alloys; gating system; melt velocity; foam filter; melt flow; aluminum alloy casting quality; heat treatment; AA6063 alloy; homogenization; mapping; Chinese-script morphology; casting; rheocasting; solidification; microstructure; characterization; investment casting; exhaust elbow; ProCAST software; high-powered engine; n/a

Reprint

Download Flyer

Casting Alloy Design and Characterization

Edited by

March 2025

190 pages

ISBN 978-3-7258-3526-3 (Hardback)
ISBN 978-3-7258-3525-6 (PDF)

https://doi.org/10.3390/books978-3-7258-3525-6

Free Download (PDF)

This is a Reprint of the Special Issue Casting Alloy Design and Characterization that was published in

Engineering

Summary

This reprint is dedicated to works related to casting alloy design and characterization, especially novel techniques; experimental and theoretical solidification studies; numerical and analytical simulations; heat and mass transfer; processing structure–property relations; and industrial applications.