Reprint
Casting and Forming of Light Alloys
Edited by
October 2023
188 pages
- ISBN978-3-0365-8918-3 (Hardback)
- ISBN978-3-0365-8919-0 (PDF)
This book is a reprint of the Special Issue Casting and Forming of Light Alloys that was published in
Chemistry & Materials Science
Engineering
Summary
This reprint aims to present the latest developments in the casting and forming of light alloys. The preparation process and performance enhancement of Al, Mg or their composite materials are mainly studied. Particular attention has been paid to the relationship between process conditions, microstructural features, and mechanical properties.
Format
- Hardback
License
© 2022 by the authors; CC BY-NC-ND license
Keywords
aluminium casting alloys; complex structure modification; titanium; barium; titanium dioxide; mechanical properties; microstructure; macrostructure; bifilm; Al–7 Si–0.3 Mg alloy; hydrogen; filtration; Weibull modulus; squeeze casting; novel Al-Si alloy; wear analysis; microstructure; mechanical properties; pin on disc wear testing; Mg–Al bimetal; vibration; interface; microstructure; bonding strength; magnesium alloy; Mg-Zr master alloy; Zr refiner; grain refinement; casting; magnesium alloy; aluminum alloy; twin-roll caster; molten metals; cladding; deformation maps; Al-Zn-Mg alloys; Al3Zr dispersoids; Zn/Mg ratios; recrystallization; AlSn20Cu alloy; microstructure; semi-continuous casting; semi-solid die casting; spray forming; antifriction alloys; bearings; porous composite; space holder method; compression property; energy absorption; FSLW; SiCp/ZL101 and ZL101 joint; temperature; friction and wear properties; wear mechanism; cast aluminum alloys; modification; rubidium; microstructure; eutectic silicon; solidification process; porosity; n/a