Reprint
Microstructural and Mechanical Characterization of Alloys
Edited by
January 2021
132 pages
- ISBN978-3-03943-755-9 (Hardback)
- ISBN978-3-03943-756-6 (PDF)
This book is a reprint of the Special Issue Microstructural and Mechanical Characterization of Alloys that was published in
Chemistry & Materials Science
Engineering
Environmental & Earth Sciences
Summary
This book contains manuscripts related to alloys (engineering materials) to discuss potential materials, methods for improvement of the strength and cyclic properties of alloys, the stability of microstructures, the possible application of new (or improved) alloys, and the use of treatment for alloy improvement. The broad spectrum of topics included in the articles of this Special Issue demonstrates that research into the microstructural and mechanical characteristics of alloys represents a contemporary field. These topics are also envisaged to be of interest to scientists in other research centers, and we can still expect new developments in this investigation field.
Format
- Hardback
License
© 2022 by the authors; CC BY-NC-ND license
Keywords
magnesium alloy; ECAP; texture; mechanical properties; Co-based alloy; tribological properties; wear; microstructure; selective laser sintering (SLS); powder injection molding (PIM); medium-carbon low-alloy steel; lath martensite; effective grain size; strength; carbon content; hot-work die steel; thermal stability; carbide; dislocation; tempering kinetics; AZ91 magnesium alloys; age-hardening response; microstructure evolution; β-Mg17Al12 phase; artificial neural network model; AA6063; fly ash; response surface methodology; tribological properties; wear rate; friction coefficient; Al-Cu-Li-Mg-Ag alloy; constitutive equation; EBSD; recrystallization; Cu-Mg alloy; equal channel angular pressing (ECAP); microstructure; mechanical properties; metallic alloys; chemical composition; microstructure; treatment; mechanical properties