Journal of Manufacturing and Materials Processing — Editors


Prof. Dr. Steven Y. Liang
George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0405, USA
Website | E-Mail
Interests: Precision Machining, Analysis of Manufacturing Processes, Materials and Manufacturing, Process Mechanics and Materials Mechanics

Editorial Board

Dr. John Agapiou
Manufacturing Systems Research Laboratory, General Motors R&D Center, 30500 Mound Road, Warren, MI 48090-9055, USA
Interests: manufacturing and Machining Technology with specialization in machinability, machining process modeling and optimization; machine tools, tooling engineering, and machining technology; simulation, modeling, and optimization of metal cutting processes and manufacturing systems
Prof. Dr. Sung-Hoon Ahn
Department of Mechanical & Aerospace Engineering, Seoul National University, Building 301, Room 1205, 151-742 Seoul, Korea
Website | E-Mail
Interests: Additive Manufacturing, Soft Robotics, Appropriate Technology
Prof. Dr. Markus Bambach
Chair of Mechanical Design and Manufacturing, Brandenburg University of Technology Cottbus-Senftenberg, Konrad-Wachsmann-Allee 17, Cottbus D-03046, Germany
Website | E-Mail
Interests: metal forming; flexible and hybrid manufacturing processes; lightweight materials; integrated computational materials engineering (ICME)
Special Issues and Collections in MDPI journals:
Special Issue: Analysis and Modeling of Sheet Metal Forming Processes
Prof. Dr. George Chryssolouris
Laboratory for Manufacturing Systems and Automation (LMS), Department of Mechanical Engineering and Aeronautics, University of Patras, Patras 26504, Greece
Website | E-Mail
Interests: Manufacturing, design, systems, engineering
Prof. Dr. Mohamed El Mansori
Arts et Métiers ParisTech (ENSAM), MSMP-EA 7350, 2 cours des Arts et Métiers, 13617, Aix-en-Provence, France
Website | E-Mail
Interests: Advanced Manufacturing, Tribology, Functional Surfaces, Biomimetic
Prof. Mohamed A. Elbestawi
Mechanical Engineering Department, McMaster University, 1280 Main St. West, Hamilton, ON, Canada
Website | E-Mail
Interests: metal additive manufacturing; machining science and technology; machine tools
Special Issues and Collections in MDPI journals:
Special Issue: Additive Manufacturing
Prof. Andrea Ghiotti
University of Padua, Department of Industrial Engineering, via Venezia 1, 35131, Padova, Italy
Website | E-Mail
Interests: metalforming, bulk metalforming, sheet metalforming, forming machines, numerical simulation, material testing, tribology, machining
Prof. Dr. Hitomi Yamaguchi Greenslet
Department of Mechanical and Aerospace Engineering,University of Florida,Gainesville, FL 32611, USA
Website | E-Mail
Interests: Abrasive technology, Magnetic field-assisted machining, Surface functionalization, Medical device development
Prof. Dr. Zafer Gürdal
McNAIR Center for Aerospace Innovation and Research, Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA
Website | E-Mail
Interests: automated manufacturing of composite material and structures, structural and multidisciplinary optimization
Prof. Dr. Carsten Heinzel
Department of Manufacturing Technologies, Foundation Institute of Materials Science (IWT), Badgasteiner Strasse 3, D-28359, Bremen, Germany
Website | E-Mail
Interests: covers cutting and abrasive machining, optimization of coolant supply, surface integrity aspects, modelling and optimization of manufacturing processes and process chains, precision engineering, monitoring and control of machining processes
Special Issues and Collections in MDPI journals:
Special Issue: Precision Manufacturing
Prof. Krzysztof Jemielniak
Department of Automation, Machine Tools and Metal Cutting, Faculty of Production Engineering, Warsaw University of Technology, Narbutta 86, 02-524 Warsaw, Poland
Website | E-Mail
Prof. Dr. Shuting Lei
Industrial & Manufacturing Systems Engineering, Kansas State University, Manhattan, KS 66506, USA
Website | E-Mail
Interests: laser micromachining; laser assisted machining; laser surface texturing; laser-matter interaction
Prof. Dr. Vidosav D. Majstorovic
Laboratory for Production Metrology and TQM, Mechanical Engineering Faculty, University of Belgrade, Kraljice Marije 16, 11120 Belgrade 35 PF 34, Serbia
Website | E-Mail
Interests: Quality Management, Manufacturing Metrology, CMM, Business Excellence, Expert Systems
Prof. Dr. Paulo A. F. Martins
Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal
Website | E-Mail
Interests: forming, joining by forming, finite element modelling, experimentation
Prof. Dr. Paul Mativenga
School of Mechanical, Aerospace and Civil Engineering (MACE), The University of Manchester, Manchester, M13 9PL, UK
Website1 | Website2 | E-Mail
Interests: machining science; sustainable manufacturing; resource efficiency; industrial sustainability; circular economy; energy consumption; energy demand; coatings; recycling; micro machining; micro milling, drilling, turning; laser material processing
Prof. René Mayer
Mechanical Engineering Department, Polytechnique Montréal, P.O. Box 6079, Station Downtown, H3C 3A7 Montréal, QC, Canada
Website | E-Mail
Interests: Precision Engineering; Manufacturing; Calibration; Metrology; Machine tools
Special Issues and Collections in MDPI journals:
Special Issue: Precision Manufacturing
Prof. Dr. Dirk Mohr
Department of Mechanical and Process Engineering, ETH Zurich, Switzerland
Website | E-Mail
Interests: plasticity; ductile fracture; sheet metal forming; additive manufacturing
Prof. Dr. Ken-ichiro Mori
Department of Mechanical Engineering, Toyohashi University of Technology, Tempaku, Toyohashi, Aichi 400-8580, Japan
Website | E-Mail
Interests: sheet metal forming, hot stamping, forging, joining, 3D printing
Prof. Dr. Joshua M. Pearce
Michigan Tech Open Sustainability Technology Lab, Department of Materials Science & Engineering and Department of Electrical & Computer Engineering, Michigan Technological University, Houghton, MI 49931, USA
Website | E-Mail
Interests: additive manufacturing, photovoltaic materials, recycling, distributed manufacturing, open source hardware, fused filament fabrication, gas metal arc welding-based additive manufacturing, 3-D printing
Dr. Antonio Riveiro Rodríguez
Applied Physics Department, University of Vigo, EEI, Lagoas-Marcosende, Vigo, 36310, Spain
Website1 | Website2 | E-Mail
Interests: laser materials processing (cutting, cladding, rapid prototyping, texturing, ablation), laser processing of biomaterials, bioactive glasses, laser synthesis of glass nanomaterials (nanofiber, nanoparticles)
Prof. Dr. Rossi Setchi
Director, Mechanics, Materials and Advanced Manufacturing, School of Engineering, Cardiff University, Queen's Buildings, The Parade, Cardiff, UK
Website | E-Mail
Interests: intelligent manufacturing, additive manufacturing, digital manufacturing, automation and robotics
Assoc. Prof. Dr. Yuki Shimizu
Department of Finemechanics, Tohoku University, Aramaki Aza Aoba 6-6-01, Sendai 980-8579, Japan
Website | E-Mail
Interests: Precision Engineering; Metrology; Sensor
Dr. David A. Stephenson
Advanced Manufacturing Engineering Center, Ford Motor Company, 29500 Plymouth Rd, Livonia, MI 48150, USA
Interests: Machining; Minimum Quantity Lubrication; Thermally sprayed coatings; Modeling of manufacturing processes
Prof. Dr. Guido Tosello
Department of Mechanical Engineering, Technical University of Denmark, Produktionstorvet Building 427A, 2800, Kgs. Lyngby, Denmark
Website | E-Mail
Interests: precision polymer processing; statistical process control; precision additive manufacturing; metrology
Special Issues and Collections in MDPI journals:
Special Issue: Micro/Nano Manufacturing
Assoc. Prof. Dr. AMM Sharif Ullah
Department of Intelligent Machines and Biomechanics, School of Regional Innovation and Social Design Engineering, Faculty of Engineering, Kitami Institute of Technology, Kitami, Hokkaido 090-8507, Japan
Website | E-Mail
Interests: Modeling and Simulation of Manufacturing Processes and Systems, Sustainable Manufacturing, Industry 4.0, Intelligent Systems, Product Development, Additive Manufacturing
Prof. Dr. Domenico Umbrello
Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende (CS), Italy
Website | E-Mail
Interests: Machining, FE Modeling of machining operations, Surface Integrity, Hybrid additive/subtractive manufacturing processes
Prof. Dr. George-Christopher Vosniakos
Manufacturing Technology Section, School of Mechanical Engineering, National Technical University of Athens, Heroon Polytehneiou 9, 15780 Athens, Greece
Website | E-Mail
Interests: intelligence in Industry 4.0, 3D printer design and control, CNC machine tools, robotics in manufacturing, optimal process planning, VR in manufacturing
Special Issues and Collections in MDPI journals:
Special Issue: Smart Manufacturing Processes in the Context of Industry 4.0
Prof. Dr. Chris Yuan
Department of Mechanical and Aerospace Engineering, Case Western Reserve University, 423 Glennan Building, 10900 Euclid Ave. Cleveland, OH 44106, USA
Website | E-Mail
Interests: Sustainable manufacturing; lithium ion battery; Atomic Layer Deposition
Back to Top