Next Article in Journal
Study of the Uniformity of the Coating Thickness of Pellets Coated by Wurster and Swirl Flow Generator Equipped Coater
Previous Article in Journal
Continuous Pelletization – Effect of Process Parameters
Article Menu

Article Versions

Export Article

Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2015). Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence. Articles are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Open AccessConference Report
Sci. Pharm. 2010, 78(3), 640; https://doi.org/10.3797/scipharm.cespt.8.PMS13 (registering DOI)

New Insights into the Pelletization Mechanism by Extrusion/Spheronization

Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University, Duesseldorf, Germany
*
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
Download PDF [151 KB, uploaded 10 October 2016]

Abstract

Pellet manufacturing by extrusion/spheronisation is quite common in the pharmaceutical field because the obtained product is characterized by a high spericity as well as a narrow particle size distribution. [...]
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

KOESTER, M.; THOMMES, M. New Insights into the Pelletization Mechanism by Extrusion/Spheronization. Sci. Pharm. 2010, 78, 640.

Show more citation formats Show less citations formats

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Sci. Pharm. EISSN 2218-0532 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top