Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2015).
Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence.
Articles are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Sci. Pharm. 2010, 78(3), 639; https://doi.org/10.3797/scipharm.cespt.8.PMS12 (registering DOI)
Continuous Pelletization – Effect of Process Parameters
Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University, Duesseldorf, Germany
Leistritz Extrusionstechnik GmbH, Nuremberg, Germany
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
Abstract The Leistritz Micro Pelletizer (LMP) is a tool to cut extrudates from a twin-screw extruder to a defined shape and size. [...]
This is an open access article distributed under the Creative Commons Attribution License
which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
MUEHLENFELD, C.; STEINER, R.; THOMMES, M. Continuous Pelletization – Effect of Process Parameters. Sci. Pharm. 2010, 78, 639.
MUEHLENFELD C, STEINER R, THOMMES M. Continuous Pelletization – Effect of Process Parameters. Scientia Pharmaceutica. 2010; 78(3):639.
MUEHLENFELD, C.; STEINER, R.; THOMMES, M. 2010. "Continuous Pelletization – Effect of Process Parameters." Sci. Pharm. 78, no. 3: 639.
Show more citation formats
Show less citations formats
[Return to top]
For more information on the journal statistics, click here
Multiple requests from the same IP address are counted as one view.