Next Article in Journal / Special Issue
Liquid Gradient Refractive Index Microlens for Dynamically Adjusting the Beam Focusing
Previous Article in Journal
Design and Algorithm Verification of a Gyroscope-Based Inertial Navigation System for Small-Diameter Spaces in Multilateral Horizontal Drilling Applications
Previous Article in Special Issue
Constriction Channel Based Single-Cell Mechanical Property Characterization
Article Menu

Export Article

Open AccessArticle
Micromachines 2015, 6(12), 1971-1983; doi:10.3390/mi6121468

Fiber-Based, Injection-Molded Optofluidic Systems: Improvements in Assembly and Applications

Department of Micro- and Nanotechnology, Technical University of Denmark, Ørsteds Plads, Building 345B, Kgs. Lyngby 2800, Denmark
DFM A/S Matematiktorvet 307, Kgs. Lyngby 2800, Denmark
Department of Photonics Engineering, Technical University of Denmark, Ørsteds Plads, Building 343, Kgs. Lyngby 2800, Denmark
Department of Medical Biotechnology and Translational Medicine, Università degli Studi di Milano, Milan 20122, Italy
Department of Physics, Technical University of Denmark, Fysikvej, Building 309, Kgs. Lyngby 2800, Denmark
Authors to whom correspondence should be addressed.
Academic Editors: Shih-Kang Fan, Da-Jeng Yao and Yi-Chung Tung
Received: 7 November 2015 / Revised: 1 December 2015 / Accepted: 4 December 2015 / Published: 9 December 2015
(This article belongs to the Special Issue Optofluidics 2015)
View Full-Text   |   Download PDF [5138 KB, uploaded 9 December 2015]   |  


We present a method to fabricate polymer optofluidic systems by means of injection molding that allow the insertion of standard optical fibers. The chip fabrication and assembly methods produce large numbers of robust optofluidic systems that can be easily assembled and disposed of, yet allow precise optical alignment and improve delivery of optical power. Using a multi-level chip fabrication process, complex channel designs with extremely vertical sidewalls, and dimensions that range from few tens of nanometers to hundreds of microns can be obtained. The technology has been used to align optical fibers in a quick and precise manner, with a lateral alignment accuracy of 2.7 ± 1.8 μm. We report the production, assembly methods, and the characterization of the resulting injection-molded chips for Lab-on-Chip (LoC) applications. We demonstrate the versatility of this technology by carrying out two types of experiments that benefit from the improved optical system: optical stretching of red blood cells (RBCs) and Raman spectroscopy of a solution loaded into a hollow core fiber. The advantages offered by the presented technology are intended to encourage the use of LoC technology for commercialization and educational purposes. View Full-Text
Keywords: fiber-based optofluidics; injection molding; optical trapping; hollow core fiber enhanced Raman spectroscopy fiber-based optofluidics; injection molding; optical trapping; hollow core fiber enhanced Raman spectroscopy

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Supplementary material

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Matteucci, M.; Triches, M.; Nava, G.; Kristensen, A.; Pollard, M.R.; Berg-Sørensen, K.; Taboryski, R.J. Fiber-Based, Injection-Molded Optofluidic Systems: Improvements in Assembly and Applications. Micromachines 2015, 6, 1971-1983.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Micromachines EISSN 2072-666X Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top