Compact Mass Flow Meter Based on a Micro Coriolis Flow Sensor
AbstractIn this paper we demonstrate a compact ready-to-use micro Coriolis mass flow meter. The full scale flow is 1 g/h (for water at a pressure drop < 1 bar). It has a zero stability of 2 mg/h and an accuracy of 0.5% reading for both liquids and gases. The temperature drift between 10 and 50 °C is below 1 mg/h/°C. The meter is robust, has standard fluidic connections and can be read out by means of a PC or laptop via USB. Its performance was tested for several common gases (hydrogen, helium, nitrogen, argon and air) and liquids (water and isopropanol). As in all Coriolis mass flow meters, the meter is also able to measure the actual density of the medium flowing through the tube. The sensitivity of the measured density is ~1 Hz.m3/kg. View Full-Text
Share & Cite This Article
Sparreboom, W.; van de Geest, J.; Katerberg, M.; Postma, F.; Haneveld, J.; Groenesteijn, J.; Lammerink, T.; Wiegerink, R.; Lötters, J. Compact Mass Flow Meter Based on a Micro Coriolis Flow Sensor. Micromachines 2013, 4, 22-33.
Sparreboom W, van de Geest J, Katerberg M, Postma F, Haneveld J, Groenesteijn J, Lammerink T, Wiegerink R, Lötters J. Compact Mass Flow Meter Based on a Micro Coriolis Flow Sensor. Micromachines. 2013; 4(1):22-33.Chicago/Turabian Style
Sparreboom, Wouter; van de Geest, Jan; Katerberg, Marcel; Postma, Ferry; Haneveld, Jeroen; Groenesteijn, Jarno; Lammerink, Theo; Wiegerink, Remco; Lötters, Joost. 2013. "Compact Mass Flow Meter Based on a Micro Coriolis Flow Sensor." Micromachines 4, no. 1: 22-33.