Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

doi:10.3390/ma9110911

Open AccessCorrection

Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802

¹

Department of Tissue Engineering, Center of 3D Printing & Organ Manufacturing, School of Fundamental Sciences, China Medical University (CMU), No. 77 Puhe Road, Shenyang North New Area, Shenyang 110122, China

²

Department of Mechanical Engineering, Tsinghua University, Center of Organ Manufacturing, Beijing 100084, China

^*

Author to whom correspondence should be addressed.

Materials 2016, 9(11), 911; https://doi.org/10.3390/ma9110911

Submission received: 7 November 2016 / Revised: 7 November 2016 / Accepted: 8 November 2016 / Published: 10 November 2016

(This article belongs to the Special Issue 3D Printing for Biomedical Engineering)

Download Versions Notes

In the published manuscript “3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802 [1]”, a reference (Ozbolat, I.T., Yu, Y. Bioprinting toward organ fabrication: challenges and future trends. IEEE Trans. Biomed. Eng. 2013, 60, 691–699) has been omitted from the references. Alterations are therefore requested to add this reference before the original reference 22 in the reference list, in the legend of Figure 2, as well as in the context (such as [17–23] in page 2 line 15, [12–23,26–28] in page 2 line 23). The following references after reference 22 therefore need to be changed. We apologize for the inconvenience this will have caused. In addition, the following changes to the text have been made:

Page 11, Section 3.3, the expression “such as stem cells” which appears six lines up from the bottom should be changed to “such as adipose-derived stem cells (ADSCs)”.

Page 18, reference 46, the page range should be “298–310”.

The changes do not affect the results. The manuscript will be updated and the original will remain online on the article webpage.

Conflicts of Interest

The authors declare no conflict of interest.

Reference

Wang, X.H.; Ao, Q.; Tian, X.H.; Fan, Y.; Wei, Y.; Hou, W.; Tong, H.; Bai, S. 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802. [Google Scholar] [CrossRef]

© 2016 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC-BY) license (http://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Wang, X.; Ao, Q.; Tian, X.; Fan, J.; Wei, Y.; Hou, W.; Tong, H.; Bai, S. Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802. Materials 2016, 9, 911. https://doi.org/10.3390/ma9110911

AMA Style

Wang X, Ao Q, Tian X, Fan J, Wei Y, Hou W, Tong H, Bai S. Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802. Materials. 2016; 9(11):911. https://doi.org/10.3390/ma9110911

Chicago/Turabian Style

Wang, Xiaohong, Qiang Ao, Xiaohong Tian, Jun Fan, Yujun Wei, Weijian Hou, Hao Tong, and Shuling Bai. 2016. "Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802" Materials 9, no. 11: 911. https://doi.org/10.3390/ma9110911

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802

Conflicts of Interest

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI