Parallel Imaging of 3D Surface Profile with Space-Division Multiplexing
AbstractWe have developed a modified optical frequency domain imaging (OFDI) system that performs parallel imaging of three-dimensional (3D) surface profiles by using the space division multiplexing (SDM) method with dual-area swept sourced beams. We have also demonstrated that 3D surface information for two different areas could be well obtained in a same time with only one camera by our method. In this study, double field of views (FOVs) of 11.16 mm × 5.92 mm were achieved within 0.5 s. Height range for each FOV was 460 µm and axial and transverse resolutions were 3.6 and 5.52 µm, respectively. View Full-Text
Scifeed alert for new publicationsNever miss any articles matching your research from any publisher
- Get alerts for new papers matching your research
- Find out the new papers from selected authors
- Updated daily for 49'000+ journals and 6000+ publishers
- Define your Scifeed now
Lee, H.S.; Cho, S.-W.; Kim, G.H.; Jeong, M.Y.; Won, Y.J.; Kim, C.-S. Parallel Imaging of 3D Surface Profile with Space-Division Multiplexing. Sensors 2016, 16, 129.
Lee HS, Cho S-W, Kim GH, Jeong MY, Won YJ, Kim C-S. Parallel Imaging of 3D Surface Profile with Space-Division Multiplexing. Sensors. 2016; 16(1):129.Chicago/Turabian Style
Lee, Hyung S.; Cho, Soon-Woo; Kim, Gyeong H.; Jeong, Myung Y.; Won, Young J.; Kim, Chang-Seok. 2016. "Parallel Imaging of 3D Surface Profile with Space-Division Multiplexing." Sensors 16, no. 1: 129.
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.