Next Article in Journal
Cloud-Based Automated Design and Additive Manufacturing: A Usage Data-Enabled Paradigm Shift
Next Article in Special Issue
Far-Infrared Based Pedestrian Detection for Driver-Assistance Systems Based on Candidate Filters, Gradient-Based Feature and Multi-Frame Approval Matching
Previous Article in Journal
Surface Acoustic Waves (SAW)-Based Biosensing for Quantification of Cell Growth in 2D and 3D Cultures
Previous Article in Special Issue
An Accurate and Generic Testing Approach to Vehicle Stability Parameters Based on GPS and INS
Article Menu

Export Article

Open AccessArticle
Sensors 2015, 15(12), 32056-32078; doi:10.3390/s151229908

Robust Road Condition Detection System Using In-Vehicle Standard Sensors

Department of Mechanical Engineering, Doctor Ortiz Ramos s/n 29071 Malaga, Spain
*
Author to whom correspondence should be addressed.
Academic Editor: Felipe Jimenez
Received: 29 September 2015 / Revised: 30 November 2015 / Accepted: 11 December 2015 / Published: 19 December 2015
(This article belongs to the Special Issue Sensors in New Road Vehicles)

Abstract

The appearance of active safety systems, such as Anti-lock Braking System, Traction Control System, Stability Control System, etc., represents a major evolution in road safety. In the automotive sector, the term vehicle active safety systems refers to those whose goal is to help avoid a crash or to reduce the risk of having an accident. These systems safeguard us, being in continuous evolution and incorporating new capabilities continuously. In order for these systems and vehicles to work adequately, they need to know some fundamental information: the road condition on which the vehicle is circulating. This early road detection is intended to allow vehicle control systems to act faster and more suitably, thus obtaining a substantial advantage. In this work, we try to detect the road condition the vehicle is being driven on, using the standard sensors installed in commercial vehicles. Vehicle models were programmed in on-board systems to perform real-time estimations of the forces of contact between the wheel and road and the speed of the vehicle. Subsequently, a fuzzy logic block is used to obtain an index representing the road condition. Finally, an artificial neural network was used to provide the optimal slip for each surface. Simulations and experiments verified the proposed method. View Full-Text
Keywords: standard vehicle sensor; friction estimation; optimal slip estimation; normal driving standard vehicle sensor; friction estimation; optimal slip estimation; normal driving
Figures

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Castillo Aguilar, J.J.; Cabrera Carrillo, J.A.; Guerra Fernández, A.J.; Carabias Acosta, E. Robust Road Condition Detection System Using In-Vehicle Standard Sensors. Sensors 2015, 15, 32056-32078.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Sensors EISSN 1424-8220 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top