Design and Application of a Field Sensing System for Ground Anchors in Slopes
AbstractIn a ground anchor system, cables or tendons connected to a bearing plate are used for stabilization of slopes. Then, the stability of a slope is dependent on maintaining the tension levels in the cables. So far, no research on a strain-based field sensing system for ground anchors has been reported. Therefore, in this study, a practical monitoring system for long-term sensing of tension levels in tendons for anchor-reinforced slopes is proposed. The system for anchor-reinforced slopes is composed of: (1) load cells based on vibrating wire strain gauges (VWSGs), (2) wireless sensor nodes which receive and process the signals from load cells and then transmit the result to a master node through local area communication, (3) master nodes which transmit the data sent from sensor nodes to the server through mobile communication, and (4) a server located at the base station. The system was applied to field sensing of ground anchors in the 62 m-long and 26 m-high slope at the side of the highway. Based on the long-term monitoring, the safety of the anchor-reinforced slope can be secured by the timely applications of re-tensioning processes in tendons. View Full-Text
Share & Cite This Article
Choi, S.W.; Lee, J.; Kim, J.M.; Park, H.S. Design and Application of a Field Sensing System for Ground Anchors in Slopes. Sensors 2013, 13, 3739-3752.
Choi SW, Lee J, Kim JM, Park HS. Design and Application of a Field Sensing System for Ground Anchors in Slopes. Sensors. 2013; 13(3):3739-3752.Chicago/Turabian Style
Choi, Se W.; Lee, Jihoon; Kim, Jong M.; Park, Hyo S. 2013. "Design and Application of a Field Sensing System for Ground Anchors in Slopes." Sensors 13, no. 3: 3739-3752.