Magnetic materials offer new application possibilities in civil engineering, biology or space science; magneto resistances (including giant ones) and new technologies for developing magnetometers (fluxgate) have been also considered. Ultrasonic-based and acoustic sensors allow recovery of three-dimensional structures and target locations for different purposes. Sensor networks and new topologies are well suited for communications, even in underwater environments. In this field, wireless sensor networks for efficiency and security also fall within the new challenges. Optical waveguides and fibers based on CMOS and polished polymers have been designed. Distances from an optical camera to a target illuminated with an infrared diode allows us to measure distances with high precision. Sonar sensors are applied to mobile robot localization. Multisensor technologies combining several sensors improve the performance of mono-sensors, as expected; the control of robots manipulators under the integration of visual, force/torques and tactile sensors becomes more effective than if they are used separately. Under the multisensory approach, the instrumentation and its design for ocean monitoring based on the physics of the radiometric L-band and the reflectometric one of the Global Navigation Satellite signals has been considered. Specific electronic devices for distance and cable length measurements have been designed. Specialized hardware implementation for recovering the wave-front phase falls within the scope of this area of research. An overview of the fabrication processes and analytical performance of ultra-microelectrode arrays (UMEAs), their characterization and applications, carried out by the Spanish scientific community, are reported. Bio-chemical sensors, based on optical, electrochemical, piezoelectric or electro-mechanical devices are appropriately covered. Optical stereoscopic sensors are used for measurements in forest environments. A specialized FPGA-based hardware implementation has been designed for computing distances to light sources with extremely large telescopes.

In wireless sensor networks the security problem for transmissions is addressed under the design of different strategies; methods to structure their topologies including parallel architectures have also been proposed. Adaptive topology reorganization approaches allow maintaining connectivity in underwater wireless sensor networks. A multi-sensor device for fire detection in forest and rural environments is built as a node in a wireless sensor network. Transmission problems in wireless sensor networks have been studied. A distributed sensor network for the control of a bioclimatic house is also considered. The identification of molecules in biochemical applications has been also addressed using optical sensors. Laser sensors are proposed as range sensors for solving the robot navigation problem, for precise calibration in an articulated arm coordinate measuring machine and to localize the position of a drill tool. Image sensors can be calibrated based on incoherent optical fiber bundles. Sensor fusion for designing adaptable network robot architecture for cooperation has been considered. Simultaneous Localization and Mapping (SLAM) procedures for autonomous robot applications belong to another emerging area which has been studied. Detection of liquids in flammable atmospheres is possible. Industrial inspection for surface defect detection has been also addressed. The multispectral Advanced Very High Resolution Radiometer sensor has been applied for computing vegetation index trends in the Iberian Peninsula. Image-based applications have been used for ground forest inventories through the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and optical stereoscopic devices. Sound time arrival measurements are used for gunshot detection in natural Parks. Urine output of a critical patient can be automatically supervised and recorded thanks to the design of an appropriate device. Feasibility studies for transmitting data from remote sensors located in the Spanish Antarctic station Juan Carlos I back to Spain have been undertaken. The use of ventilators via oral is a suitable sensor as a non-invasive technique for monitoring respiratory variables.

Neuro-fuzzy is a technique used for recovering 3D environmental information based on ultrasonic sensors. Points and curves are extracted as dominant features for robotic navigation purposes with 2D laser range sensors. In sensor networks and networked control systems an event-based control strategy becomes suitable. Photogrammetric techniques are applied for precise measurements on the decks in recreational ships, saving important production costs. Conoscopy holography based on interferometry is proposed as a new technique for precise measurements. Image processing techniques are used for coin detection, head tracking and also for forest inventories, the latter being accomplished through use of a stereovision sensor. Adaptive regression splines are used for classifying multi-spectral satellite images. Fault detection and identification techniques for Unmanned Aerial Vehicles in collaborative contexts are satisfactorily explored. Based on acoustic emissions and applying least-square techniques, relative locations among mobile sensors are determined. Distributed agents combined with unsupervised learning algorithms are proposed as a solution to solve the node vulnerability problem in sensor networks. Intelligent agent-based architectures are suitable for multisensory integration and communication under a collaborative context. Methods for geometric corrections and a new data format for quality and storage respectively have been designed for hyperspectral images.