Sustainability, Circular Economy and Waste Recycling: Advances in Materials Research

doi:10.3390/books978-3-7258-1750-4

Format

Hardback

License and Copyright

Keywords

polymer; plastic; waste; degradation; microplastic; nanoplastic; environment pollution; food safety; human health; microporous calcium silicate; extraction silicon solution; crystal transformation; fly ash; preheated decarburized; backfill; coal gangue; compressive strength; microstructure; leaching; manganese; sludge; zinc; lead; potassium; sulfuric acid; ferromanganese; submerged arc furnace; kinetics; manganese carbonate; short-carbon-fiber-reinforced PA6,6 thermoplastic composites; recycled carbon fibers; 3D printing; recoverability; critical length; proton exchange membrane water electrolysis (PEMWE); green hydrogen; renewable energy; electrocatalysts; noble metals; non-noble metals; confectionery gels; low-sugar candy; gummy jelly; furcellaran; biodegradable films; vanadium pentoxide; leaching process; recovery of V₂O₅; recycling; extraction; adsorption; catalytic oxidation; hydrogen reforming; non-oxidative coupling; toluene; methane; waste; cocoa shell; 3D printing; fused filament fabrication; PLA; circular economy; fly ash; silica aerogel; acid dissolution–alkali leaching; ambient pressure drying; reinforcing modification; geopolymer mortars; lightweight aggregates; sustainable mortars; thermal conductivity

Reprint

Download Flyer

Sustainability, Circular Economy and Waste Recycling: Advances in Materials Research

Edited by

August 2024

250 pages

ISBN 978-3-7258-1749-8 (Hardback)
ISBN 978-3-7258-1750-4 (PDF)

https://doi.org/10.3390/books978-3-7258-1750-4

Free Download (PDF)

This is a Reprint of the Special Issue Sustainability, Circular Economy and Waste Recycling: Advances in Materials Research that was published in

Chemistry & Materials Science

Environmental & Earth Sciences

Engineering

Summary

Scientific research is constantly promoting innovative materials and technologies for the reuse of raw materials, due to environmental problems and new legislation that has emerged in recent years. Sustainability, the circular economy, green engineering, waste recycling, and the development of innovative and eco-friendly materials are some of the main topics addressed by the different authors in this Special Issue.