Reprint

Mechanical Properties in Progressive Mechanically Processed Metallic Materials

Edited by
February 2021
256 pages
  • ISBN978-3-0365-0076-8 (Hardback)
  • ISBN978-3-0365-0077-5 (PDF)

This is a Reprint of the Special Issue Mechanical Properties in Progressive Mechanically Processed Metallic Materials that was published in

Chemistry & Materials Science
Engineering
Physical Sciences
Summary
The demands on innovative materials given by the ever-increasing requirements of contemporary industry require the use of high-performance engineering materials. The properties of materials and alloys are a result of their structures, which can primarily be affected by the preparation/production process. However, the production of materials featuring high levels of the required properties without the necessity to use costly alloying elements or time- and money-demanding heat treatment technologies typically used to enhance the mechanical properties of metallic materials (especially specific strength) still remains a challenge. The introduction of thermomechanical treatment represented a breakthrough in grain refinement, consequently leading to significant improvement of the mechanical properties of metallic materials. Contrary to conventional production technologies, the main advantage of such treatment is the possibility to precisely control structural phenomena that affect the final mechanical and utility properties. Thermomechanical treatment can only decrease the grain size to the scale of microns. However, further research devoted to pushing materials’ performance beyond the limits led to the introduction of severe plastic deformation (SPD) methods providing producers with the ability to acquire ultra-fine-grained and nanoscaled metallic materials with superior mechanical properties. SPD methods can be performed with the help of conventional forming equipment; however, many newly designed processes have also been introduced.
Format
  • Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
crack nucleation; fatigue; plastic deformation; surface topography; high-entropy alloy; powder metallurgy; plastic deformation; microstructure; spring steel; heat treatment; retained austenite; Mössbauer spectroscopy; neutron diffraction; tungsten heavy alloy; rotary swaging; finite element analysis; deformation behaviour; residual stress; austenitic steel 08Ch18N10T; cyclic plasticity; cyclic hardening; experiments; finite element method; low-cycle fatigue; tungsten; rotary swaging; neutron diffraction; dislocations; microstrain; twist channel angular pressing; severe plastic deformation; microstructure; mechanical properties; disintegrator; microscopy; wear; high energy milling; cement; tungsten heavy alloy; powder metallurgy; sintering; quenching; microstructure; abrasive waterjet; machining; traverse speed; material structure; material properties; cutting force; deformation force; clad composite; rotary swaging; finite element analysis; effective strain; residual stress; clad composite; rotary swaging; finite element analysis; effective strain; residual stress; heat-resistant steel; cast steel; microalloying; strengthening mechanism; abrasive water jet cutting; surface roughness; heat treatment; hardness; tensile strength; mechanical properties; functional properties; metallic systems; mechanical processing; structural phenomena