Reprint

Biodegradable Metals

Edited by
November 2018
200 pages
  • ISBN978-3-03897-386-7 (Paperback)
  • ISBN978-3-03897-387-4 (PDF)

This book is a reprint of the Special Issue Biodegradable Metals that was published in

Chemistry & Materials Science
Engineering
Summary

The interest in biocompatible and biodegradable metals, such as magnesium, is mainly related to their potential use as structural material for orthopedic and cardiovascular applications where a temporary medical device is required. However, in the case of magnesium, in vivo experiments have clearly shown that the corrosion degradation rate of magnesium and its alloys is too high and, hence, results in producing gas cavities that can promote the danger of gas embolism, tissue separation, and premature loss of mechanical integrity. The aim of this Special Issue on Biodegradable Metals is to explore and introduce innovative strategies to overcome the current limitations of magnesium.

Format
  • Paperback
License
© 2019 by the authors; CC BY license
Keywords
biodegradable metals; iron foam; scaffold; compression; degradation; cell size; open cell foam; powder metallurgy; zinc; cold pressing; sintering; hot pressing; mechanical properties; zinc; zinc alloys; biodegradable; biocompatible; corrosion degradation; mechanical properties; magnesium; powder metallurgy; cold pressing; hot pressing; EIS (Electrochemical impedance spectroscopy); three-point bending test; corrosion; magnesium alloy; AZ31; AZ61; HBSS; HBSS+; EIS; potentiodynamic test; Mg alloy; regeneration membrane; guided bone regeneration; heat treatment; fluoride coating; biocompatibility; biological responses; biocompatibility; biodegradable; magnesium-based materials; zinc; bioabsorbable; biodegradable; implants; encapsulation; in vivo; magnesium; zinc; iron; biodegradable materials; wire drawing; bone regeneration; bone tissue engineering; bioresorbable implants; corrosion layer; vascular stents; orthopedic implants; microbial infections; n/a