Reprint

Adsorption Desalination and Cooling Systems: Advances in Design, Modeling and Performance

Edited by
November 2022
260 pages
  • ISBN978-3-0365-5913-1 (Hardback)
  • ISBN978-3-0365-5914-8 (PDF)

This book is a reprint of the Special Issue Adsorption Desalination and Cooling Systems: Advances in Design, Modeling and Performance that was published in

Chemistry & Materials Science
Engineering
Environmental & Earth Sciences
Physical Sciences
Summary

Increasing energy efficiency; reducing energy demand, greenhouse gas emissions, and the use of waste; and integrating renewable and recycled heat from low-temperature sources are significant challenges today and are key parts of 4th Generation District Heating (4GDH) concept. On the other hand, currently about one billion people around the world are suffering from water scarcity, and another three billion are approaching this situation. Only 2.5% of all water on the planet is freshwater, of which around 70% is not available and only 0.4% constitutes the most valuable portion of freshwater. Adsorption cooling technology is one of the most effective ways of addressing both these issues. This technology cools and produces potable water from the renewable and wasted heat of the near ambient temperature, including from sewage water, solar heat, and underground resources. This Special Issue Reprint Book provides the detailed information concerning the above-mentioned issues.

Format
  • Hardback
License
© 2022 by the authors; CC BY-NC-ND license
Keywords
adsorption chiller; coefficient of performance; desalination; energy efficiency; low-temperature heat; silica gel; specific cooling power; waste heat recovery; sorption processes; deep learning; neural networks; Long Short-Term Memory (LSTM); silica gel; additives; sorption capacity; sorption process time; kinetics sorption; adsorption; exergy; dead state; adsorption cooling; reheat cycle, mass recovery; adsorption; chiller; desalination; adsorptive water harvesting from the atmosphere; metal–organic frameworks; MIL-160; water vapor adsorption; specific water productivity; specific energy consumption; adsorption; zeolite; SAPO-34; adsorption cooling; mass recovery; variable mode; adsorption chiller; adsorption working pairs; coated beds; comparative analysis; natural refrigerants; adsorption chiller; desalination; preheating; silica gel; steam; adsorption; adsorption chiller; desalination; coefficient of performance; specific cooling power; low-temperature heat; silica gel; copper; additives; cycle time; CFD; adsorption; chiller; desalination; metal organic silica; nanocomposites; sorption; thermal diffusivity; adsorption chiller; n/a