Reprint

Additively Manufactured Coatings

Edited by
November 2021
106 pages
  • ISBN978-3-0365-2488-7 (Hardback)
  • ISBN978-3-0365-2489-4 (PDF)

This is a Reprint of the Special Issue Additively Manufactured Coatings that was published in

Chemistry & Materials Science
Engineering
Summary

Functional coatings are cost-effective means to protect substrates from wear, corrosion, erosion, tribocorrosion, high temperature and high pressure in extreme environmental conditions. These are primarily manufactured through metal/ceramic powder deposition in a subsequent layer by layer fashion on the substrate materials. In all cases, the functional coatings need to be reliable for the intended application. The emerging techniques in 3D printing/additive manufacturing can be utilized to develop high-performance functional coatings. These methods provide geometrical precision, flexibility in geometrical complexity, customization of the coating layers, and reduce the raw materials waste, keeping the manufacturing cost low while addressing many of the technical barriers of conventional coating methods. With the rapid development of cutting-edge value-added technologies in aerospace, nuclear, military, space, and energy industry, 3D printing/additive manufacturing techniques will be major advantages. Novel functional coatings and 3D printing/additive manufacturing techniques will be critical to value-added components in the future development of technologies. The book provide an overview of the recent development in coating manufacturing techniques and potential to use in high-end engineering applications.

Format
  • Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
metal additive manufacturing; nickel-based alloy; microstructure; cooling effect; laser cladding; TiC; microstructure control; wear behavior prediction; ductile materials; dislocation density; microstructure and recrystallization; cold gas dynamic spray; molecular dynamics; Ti coating; cyclic potentiodynamic polarization (CPP) test; hysteresis loop; wear; additive manufacturing; Inconel 718; friction; wear; tribocorrosion; corrosion; laser cladding; H13 steel; thermal stress cycle; numerical simulation; unstable alternating thermal stress; residual stress; n/a

Related Books

August 2020

Functional Coatings

Chemistry & Materials Science
...
November 2021

Coatings Imparting Multifunctional Properties to Materials

Chemistry & Materials Science
May 2021

Functional Ceramic Coatings

Chemistry & Materials Science
August 2020

Advances in Coatings Deposition and Characterization

Biology & Life Sciences
...