Reprint
Refining and Casting of Steel
Edited by
November 2020
214 pages
- ISBN978-3-03943-434-3 (Hardback)
- ISBN978-3-03943-435-0 (PDF)
This book is a reprint of the Special Issue Refining and Casting of Steel that was published in
Chemistry & Materials Science
Engineering
Summary
Steel has become the most requested material all over the world during the rapid technological evolution of recent centuries. As our civilization grows and its technological development becomes connected with more demanding processes, it is more and more challenging to fit the required physical and mechanical properties for steel in its huge portfolio of grades for each steel producer. It is necessary to improve the refining and casting processes continuously to meet customer requirements and to lower the production costs to remain competitive. New challenges related to both the precise design of steel properties and reduction in production costs are combined with paying special attention to environmental protection. These contradictory demands are the theme of this book.
Format
- Hardback
License
© 2020 by the authors; CC BY-NC-ND license
Keywords
oxygen converter slag; chemical composition of slag; structural composition of slag; continuous casting; tundish; residence time; transient casting; swirling flow tundish; SEN immersion depth; multiphase flow; heat transfer; continuous casting mold; continuous casting; tundish; residence time; computional fluid dynamiscs (CFD); continuous casting; fuzzy logic; optimal cooling; steel quality prediction; deoxidation; inclusions; thermodynamics; Ti-bearing steel; Ca treatment; dephosphorization; EAF; BOF; phosphorus equilibrium; continuous casting; wide-thick slab; non-uniform solidification; heavy reduction; porosity; deformation; ladle stirring; turbulence; slag; interface; refining; mixing time; slag opening; pipeline steel; inclusions; cooling rate; composition; Al-TRIP steel; slag; slag-steel reaction; crystalline morphology; equilibrium model; CALPHAD; thermodynamic model; inclusions; rare earth; numerical simulation; C80D steel; transverse water flux distribution; heat transfer; solidification structure; reoxidation; tundish cover flux; Cr2O3; decomposition reaction; RH degasser; physical Simulation; mixing Time; PIV; flow field; n/a