Search Results (21)

Remote sensing precipitation products are essential for the systematic analysis of precipitation characteristics and changes. This study conducts a comparative evaluation of precipitation products from rain gauge stations, Climate Prediction Center morphing technique (CMORPH), Tropical Rainfall Measuring Mission precipitation radar (TRMM PR) version 7 and Global Precipitation Measurement (GPM) Dual-Frequency Precipitation Radar Ku band (DPR KuPR) version 6 orbital observations during the common observational period (April–September 2014) across South China. The spatial patterns and probability density function of rain rates from four precipitation products show similar features. However, average rain rates from CMORPH (0.2–2.6 mm/h) tend to be smaller than those from rain gauge (0.1–4.4 mm/h) in temporal and spatial distribution. Conversely, average rain rates from TRMM PR and GPM KuPR (0.4–10.0 mm/h) are generally larger and exhibit more pronounced monthly changes. Despite notable differences in the number of detection samples, TRMM and GPM exhibit comparable spatiotemporal distributions and vertical structures, including rain-rate profiles, storm top heights and liquid (ice) water path. This confirms the consistency of space-borne precipitation radars and provides a foundation for analyzing long-term precipitation trends. Further analysis reveals that light rain rates from CMORPH have relatively small deviations, while rain rates generally tend to underestimate the rain rate compared to rain gauge. In contrast, TRMM PR and GPM KuPR tend to generally overestimate rain rates. Meanwhile, CMORPH (1.5–6.0 mm/h) shows larger deviations from rain gauge than TRMM and GPM, and the bias progressively increases as rain rates rise, as indicated by root mean square error results. Several statistical metrics suggest that although the missing detection rates of TRMM and GPM are higher than those of CMORPH (probability of detection 10–60%), their false detection rates are spatially lower (false alert ratio 10–30%) in Middle-East China. This study aims to provide valuable insights for enhancing precipitation retrieval algorithms and improving the applicability of remote sensing precipitation products. Full article

Precipitation events have been occurring more frequently in the hyper-arid region of the Taklamakan Desert (TD) under recent climate change. However, in this water-limited environment, the microphysical characteristics of precipitation, as well as their link to rainfall intensity, remain unclear. To address this, this study utilizes dual-frequency precipitation radar (DPR) data of the Global Precipitation Measurement (GPM) satellite from 2014 to 2023 to analyze the microphysical characteristics of different precipitation types (stratiform and convective) in the TD during the summer. The results show that liquid water path (LWP) is a key factor influencing precipitation type: when LWP is insufficient, stratiform precipitation is more likely to occur (84.1%), while convective precipitation is difficult to occur (15.9%). Microphysical process analysis indicates that in convective precipitation, abundant low-level moisture leads to the growth of liquid particles primarily through the collision–coalescence process (59.7%), resulting in larger raindrop diameters (1.7 mm) and lower concentrations (31.9 mm⁻¹ m⁻³). In contrast, stratiform precipitation, with limited LWP, primarily involves the melting and breaking-up of high-level ice-phase particles, leading to smaller raindrop diameters (1.2 mm) and higher concentrations (34.3 mm⁻¹ m⁻³). The warm rain process plays a significant role in raindrop formation in both types of precipitation. The greater (lesser) the amount of LWP, the larger (smaller) the contribution of collision–coalescence (break-up) processes, and the larger (smaller) the raindrop diameter and precipitation intensity. Full article

This study uses idealized simulations to investigate the impact of cloud condensation nuclei (CCN) on a cumulus congestus. Thirteen cases with the initial CCN_C, which is the CCN concentration at 1% supersaturation with respect to water, from 10 to 10,000 cm⁻³ are simulated. The analysis focuses on the liquid phase due to the negligible ice phase in this study. A non-monotonic response of cloud properties and precipitation to CCN concentration is observed. When CCN_C is increased from 10 to 50 cm⁻³, the enhanced condensation due to the more numerous droplets invigorates the cumulus congestus. The delayed precipitation formation due to the smaller droplets also facilitates the cloud development. The two processes together lead to a higher liquid water path (LWP), higher cloud top, and heavier precipitation. The cumulus congestus has the highest cloud top, the strongest updraft, and the most accumulated precipitation and at CCN_C = 50 cm⁻³. When CCN_C is increased from 50 to 500 cm⁻³, the condensation near the cloud base is further enhanced and the precipitation is further delayed, both of which lead to more liquid water remaining in the cloud, and thus an even higher LWP and heavier precipitation rate in the later stage. However, the significantly enhanced evaporation near the cloud top limits the vertical development of the cumulus congestus, leading to a lower cloud top. When CCN_C is further increased to be higher than 1000 cm⁻³, the cumulus congestus is strongly suppressed, and no precipitation forms. The ratio of the precipitation production rate to vertical cloud water flux in the updraft is not a constant, as is generally assumed in cumulus parameterization schemes, but decreases significantly with increasing CCN concentration. It is also found that the CCN effect on the cumulus congestus relies on which parameters are used to describe the cloud strength. In this study, as CCN_C increases, the LWP and the maximum precipitation rate peak at CCN_C = 500 cm⁻³, while the cloud top height, maximum updraft, and accumulated precipitation amount peak at CCN_C = 50 cm⁻³. Full article

With the rapid development of the general aviation industry in China, the influence of high-impact aeronautical weather events, such as aircraft icing, on flight safety has become more and more prominent. On 1 March 2021, an aircraft conducting weather modification operations crashed over Ji’an City, due to severe icing. Using multi-source meteorological observations and atmospheric numerical simulations, we analyzed the meteorological causes of this icing accident. The results indicate that a cold front formed in northwestern China and then moved southward, which is the main weather system in the icing area. Based on the icing index, we conducted an analysis of the temperature, relative humidity, cloud liquid water path, effective particle radius, and vertical flow field, it was found that aircraft icing occurred behind the ground front, where warm-moist airflows rose along the front to result in a rapid increase of water vapor in 600–500 hPa. The increase of water vapor, in conjunction with low temperature, led to the formation of a cold stratiform cloud system. In this cloud system, there were a large number of large cloud droplets. In addition, the frontal inversion increased the atmospheric stability, allowing cloud droplets to accumulate in the low-temperature region and forming meteorological conditions conducive to icing. The Weather Research and Forecasting model was employed to provide a detailed description of the formation process of the atmospheric conditions conducive to icing, such as the uplifting motion along the front and supercooled water. Based on a real case, we investigated the formation process of icing-inducing meteorological conditions under the influence of a front in detail in this study and verified the capability of a numerical model to simulate the meteorological environment of frontal icing, in order to provide a valuable reference for meteorological early warnings and forecasts for general aviation. Full article

Using CloudSat/CALIPSO satellite data and ERA5 reanalysis data from 2006 to 2010, the effects of aerosols on ice- and mixed-phase, single-layer, non-precipitating clouds over the Tibetan Plateau during nighttime in the MAM (March to May), JJA (June to August), SON (September to November), and DJF (December to February) seasons were examined. The results indicated the following: (1) The macrophysical and microphysical characteristics of ice- and mixed-phase clouds exhibit a nonlinear trend with increasing aerosol optical depth (AOD). When the logarithm of AOD (lnAOD) was ≤−4.0, with increasing AOD during MAM and JJA nights, the cloud thickness and ice particle effective radius of ice-phase clouds and mixed-phase clouds, the ice water path and ice particle number concentration of ice-phase clouds, and the liquid water path and cloud fraction of mixed-phase clouds all decreased; during SON and DJF nights, the cloud thickness of ice-phase clouds, cloud top height, liquid droplet number concentration, and liquid water path of mixed-phase clouds all decreased. When the lnAOD was >−4.0, with increasing AOD during MAM and JJA nights, the cloud top height, cloud base height, cloud fraction, and ice particle number concentration of ice-phase clouds, and the ice water path of mixed-phase clouds all increased; during SON and DJF nights, the cloud fraction of mixed-phase clouds and the ice water path of ice-phase clouds all increased. (2) Under the condition of excluding meteorological factors, including the U-component of wind, V-component of wind, pressure vertical velocity, temperature, and relative humidity at the atmospheric pressure heights near the average cloud top height, within the cloud, and the average cloud base height, as well as precipitable water vapor, convective available potential energy, and surface pressure. During MAM and JJA nights. When the lnAOD was ≤−4.0, an increase in aerosols may have led to a decrease in the thickness of ice and mixed-phase cloud layers, as well as a reduction in cloud water path values. In contrast, when the lnAOD was >−4.0, an increase in aerosols may contribute to elevated cloud base and cloud top heights for ice-phase clouds. During SON and DJF nights, changes in various cloud characteristics may be influenced by both aerosols and meteorological factors. Full article

The aerosol–cloud–precipitation correlation has been a significant scientific topic, primarily due to its remarkable uncertainty. However, the possible modulation of aerosol on the precipitation capacity of clouds has received limited attention. In this study, we utilized multi-source data on aerosol, cloud properties, precipitation, and meteorological factors to investigate the impact of aerosols on precipitation efficiency (PE) in the Sichuan Basin (SCB) and Yun-nan-Guizhou Plateau (YGP), where the differences between terrain and meteorological environment conditions were prominent. In the two study regions, there were significant negative correlations between the aerosol index (AI) and PE in spring, especially in the YGP, while the correlations between the AI and PE in other seasons were not as prominent as in spring. In spring, aerosol significantly inhibited both the liquid water path (LWP) and the ice water path (IWP) in the YGP, but negatively correlated with the IWP and had no significant relationship with the LWP in the SCB. Aerosol inhibited precipitation in the two regions mainly by reducing cloud droplet effective radius, indicating that warm clouds contributed more to precipitation in spring. The suppressive impact of aerosols on precipitation serving as the numerator of PE is greater than that of the cloud water path as the denominator of PE, resulting in a negative correlation between aerosol and PE. The AI–PE relationship is significantly dependent on meteorological conditions in the YGP, but not in the SCB, which may be related to the perennial cloud cover and stable atmosphere in the SCB. In the future, as air quality continues to improve, precipitation efficiency may increase due to the decrease in aerosol concentration, and of course, the spatio-temporal heterogeneity of the aerosol–cloud–precipitation relationship may become more significant. Full article

Thermodynamic and liquid water profiles can be retrieved by a ground-based microwave radiometer (MWR) in nearly all weather conditions, which is useful for detecting mesoscale phenomena. This paper reviews the advances in remote sensing of atmospheric profiles and cloud properties by MWR in central China. Comparative studies indicate that MWR retrieval accuracy is different under various skies, especially those that decay under precipitation. The off-zenith method is proven to be capable of reducing the impact of precipitation and snow on MWR retrieval accuracy. Application studies demonstrate that MWR retrievals are helpful for early warning of rainstorms, hailstorms, and thunderstorms. Moreover, MWR retrievals provide a way to study cloud properties. The temporal variations of cloud occurrence frequency (COF) and liquid water path (LWP) are different for low, middle, and high clouds, and the vertical distribution of COF is also different in autumn and other seasons. Note that MWR can infer valid retrievals over the eastern Tibetan Plateau due to the weak precipitation over there. Also, cloud properties over the eastern Tibetan Plateau present differences from those over central China, and this is related to the different characteristics of atmospheric water vapor between these two regions. To bring more benefits for mechanism study and early warning of severe weather and numerical weather prediction, the decayed accuracy of MWR zenith retrievals under precipitation should be resolved. And combining MWR with other instruments is necessary for MWR application in detecting multi-layer clouds and ice clouds. Full article

Observations collected during cold-season precipitation periods at Utquagvik, Alaska and at the multidisciplinary drifting observatory for the study of Arctic climate (MOSAiC) are used to statistically analyze the relations among the atmospheric water cycle parameters including the columnar supercooled liquid and ice amounts (expressed as liquid-water and ice-water paths, i.e., LWP and IWP), the integrated water vapor (IWV) and the near-surface snowfall rate. Data come from radar and radiometer-based retrievals and from optical precipitation sensors. While the correlation between snowfall rate and LWP is rather weak, correlation coefficients between radar-derived snowfall rate and IWP are high (~0.8), which is explained, in part, by the generally low LWP/IWP ratios during significant precipitation. Correlation coefficients between snowfall rate and IWV are moderate (~0.45). Correlations are generally weaker if snowfall is estimated by optical sensors, which is, in part, due to blowing snow. Correlation coefficients between near-surface temperature and snowfall rates are low (r < 0.3). The results from the Alaska and MOSAiC sites are generally similar. These results are not very sensitive to the amount of time averaging (e.g., 15 min averaging versus daily averages). Observationally based relations among the water cycle parameters are informative about atmospheric moisture conversion processes and can be used for model evaluations. Full article

Clouds are a critical factor in regulating the climate system, and estimating cloudy-sky Surface Downward Longwave Radiation (SDLR) from satellite data is significant for global climate change research. The models based on cloud water path (CWP) are less affected by cloud parameter uncertainties and have superior accuracy in SDLR satellite estimation when compared to those empirical and parameterized models relying mainly on cloud fraction or cloud-base temperature. However, existing CWP-based models tend to overestimate the low SDLR values and underestimate the larger SDLR. This study found that this phenomenon was caused by the fact that the models do not account for the varying relationships between cloud radiative effects and key parameters under different Liquid Water Path (LWP) and Precipitable Water Vapor (PWV) ranges. Based upon this observation, this study utilized Fengyun-4A (FY-4A) cloud parameters and ERA5 data as data sources to develop a new CWP-based model where the model coefficients depend on the cloud phase and cloud water path range. The accuracy of the new model’s estimated SDLR is 20.8 W/m² for cloudy pixels, with accuracies of 19.4 W/m² and 23.5 W/m² for overcast and partly cloudy conditions, respectively. In contrast, the accuracy of the old CWP-based model was 22.4, 21.2, and 24.8 W/m², respectively. The underestimation and overestimation present in the old CWP-based model are effectively corrected by the new model. The new model exhibited higher accuracy under various station locations, cloud cover scenarios, and cloud phase conditions compared to the old one. Comparatively, the new model showcased its most remarkable improvements in situations involving overcast conditions, water clouds with low PWV and low LWP values, ice clouds with large PWV, and conditions with PWV ≥ 5 cm. Over a temporal scale, the new model effectively captured the seasonal variations in SDLR. Full article

Geostationary meteorological satellite data with high spatial and temporal resolution can be used to retrieve cloud physical parameters, which has significant advantages in tracking cloud evolution and development. Based on satellite multispectral RGB composite image and cloud physical analysis methods, we quantitatively analyze the evolution characteristics of cloud parameters in the pre-, mid- and post-artificially influenced weather process, explore the application potential benefits of satellite data in monitoring the operating conditions of the artificially influenced weather in the Panxi region, and verify the feasibility analysis of the evaluation of their effects. In this study, cloud parameters such as cloud particle effective radius (Re), cloud liquid water path (LWP), cloud ice water path (IWP), and cloud top height and temperature (CTH and CTT) are retrieved using FY−4A satellite data. For the Panxi region, the evolution characteristics of typical cloud parameters in the affected area before and after two aircraft artificial operational precipitation enhancements are analyzed. The results show that the satellite retrieval of cloud characteristic parameters in the Panxi region has good application value, which can be used to guide the artificial Operational Precipitation Enhancement. In this precipitation process, there are solid particles in the upper layer cloud and supercooled water in the lower layer cloud. After the cold cloud catalysis, the cloud top height, liquid water and ice water content, particle effective radius and ground precipitation in the operational area increased, and the cloud top temperature decreased. Thus, it effectively alleviated the drought in the Panxi region. The satellite retrieval of cloud characteristic parameters in the Panxi region has a good application value, which can provide a basis and guidance for future weather modification operations in the Panxi region. Full article

Locally-originated typhoons in the South China Sea (SCS) are characterized by long duration, complex track, and high probability of landfall, which tend to cause severe wind, rainstorm, and flood disasters in coastal regions. Therefore, it is of great significance to conduct research on typhoon precipitation microphysics in the SCS. Using GPM satellite observations, the precipitation microphysics of typhoons in the SCS are analyzed by combining case and statistical studies. The precipitation of Typhoon Ewiniar (2018) in the SCS is found to be highly asymmetric. In the eyewall, the updraft is strong, the coalescence process of particles is distinct, and the precipitation is mainly concentrated in large raindrops. In the outer rainbands, the “bright-band” of melting layer is distinct, the melting of ice particles and the evaporation of raindrops are distinct, and there exist a few large raindrops in the precipitation. Overall, the heavy precipitation of typhoons in the SCS is composed of higher concentration of smaller raindrops than that in the western Pacific (WP), leading to a more “oceanic deep convective” feature of typhoons in the SCS. While the heavy precipitation of typhoons in the SCS is both larger in drop size and number concentration than that in the North Indian Ocean (NIO), leading to more abundant rainwater of typhoons in the SCS. For the relatively weak precipitation (R < 10 mm h⁻¹), the liquid water path (LWP) of typhoons in the SCS is higher than that of the NIO, while the ice water path (IWP) of the locally-originated typhoons in the SCS is lower than that of the WP. For the heavy precipitation (R ≥ 10 mm h⁻¹), the LWP and IWP of typhoons in the SCS are significantly higher than those in the WP and NIO. Full article

Clouds are important modulators of the solar radiation reaching the earth’s surface. However, the impacts of cloud properties other than cloud cover are seldom mentioned. By combining the satellite-retrieved cloud properties, the latest radiative transfer model, and an advanced PVLIB-python software for solar photovoltaic (PV) estimation, the impacts of different types of clouds on the maximum available solar PV potential (measured with the plane-of-array-irradiance, POAI) are quantified. The impacts of ice and liquid water clouds are found to be the highest on Tibetan Plateau over western China in spring, and central and southern China in winter, respectively. The reduction of POAI by liquid water clouds is almost twice of that by ice clouds except for spring. It is found that the POAI can be reduced by 27–34% by all clouds (ice + liquid water clouds) in different seasons. The sensitivities of the solar PV potential to the changes in cloud properties including the cloud fraction, cloud top pressure, cloud effective radius, and cloud water path are also analyzed. Three kinds of settings of PV panel tilting, namely fixed tilt, one-axis tracking, and two-axis tracking, are considered. It is found that the cloud properties are essential to estimate the solar PV potentials, especially for the cloud fraction. The attenuation of solar radiation by clouds are growingly larger as the solar plane tilting settings get more complicated. The outlook of solar PV potential is quite variable as the changes in cloud properties are highly uncertain in the future climate scenarios. Full article

Two-dimensional (2D) and three-dimensional (3D) cloud-resolving model (CRM) results from the Tropical Rainfall Measuring Mission Kwajalein Experiment (KWAJEX) were applied to analyze the diurnal cycle of cloud development in the tropics. Cloud development is intimately associated with the growth of secondary circulation, which can be analyzed in the budget of perturbation kinetic energy (PKE). The ice and liquid water path (IWP+LWP) is a fundamental parameter for estimating clouds, with the analyzed results suggesting that (1) the ice and liquid water path (IWP+LWP) and PKE values attained in convective regions were higher during the nighttime than during the daytime and that the maxima of IWP+LWP and PKE occurred at midnight in the lower troposphere in the 3D model run, and that (2) the IWP+LWP and PKE values in stratiform regions were much higher in the afternoon than in the morning, while the maxima of IWP+LWP and PKE occurred in the afternoon in the middle troposphere in the 2D model run. Further analysis demonstrated that both the high IWP+LWP and PKE values in the lower troposphere at midnight were mainly associated with the warm–humid lower troposphere in convective regions. However, those in the middle troposphere in the afternoon were primarily linked to the dry–cold upper troposphere and moist–warm lower troposphere in stratiform regions. The results further revealed that (1) both IWP+LWP and PKE exhibited shorter time scales in the 2D model runs than in the 3D model runs and that (2) the maximum IWP+LWP values occurred in the afternoon in the 2D model runs and at midnight in the 3D model runs. Full article

The In-Cloud Icing and Large-drop Experiment (ICICLE) flight campaign, led by the United States Federal Aviation Administration, was conducted in the geographical region over US Midwest and Western Great Lakes, between January and March 2019, with the aim to collect atmospheric data and study the aircraft icing hazard. Measurements were taken onboard the National Research Council of Canada (NRC) Convair-580 aircraft, which was equipped with more than 40 in situ probes, sensors, and remote sensing instruments in collaboration with Environment and Climate Change Canada (ECCC). In each flight, aerosol, cloud microphysics, atmospheric and aircraft state data were collected. Atmospheric environment characterization is critical both for cloud studies and for operational decision making in flight. In this study, we use the advantage of multiple input parameters collected in-flight together with machine learning and clustering techniques to characterize the flight environment. Eleven parameters were evaluated for the classification of the sampled environment along the flight path. Namely, aerosol concentration, temperature, hydrometeor concentration, hydrometeor size, liquid water content, total water content, ice accretion rate, and radar parameters in the vicinity of the aircraft. In the analysis of selected flights, we were able to identify periods of supercooled liquid clouds, glaciated clouds, two types of mixed-phase clouds, and clear air conditions. This approach offers an alternative characterization of cloud boundaries and a complementary identification of flight periods with hazardous icing conditions. Full article

The macro- and microphysical properties of clouds can reflect their vertical physical structure and evolution and are important indications of the formation and development of precipitation. We used four-year merged CloudSat-CALIPSO-MODIS products to distinguish the macro- and microphysical properties of precipitating and non-precipitating clouds over central-eastern China during the warm season (May–September). Our results showed that the clouds were dominated by single- and double-layer forms with occurrence frequencies > 85%. Clouds with a low probability of precipitation (POP) were usually geometrically thin. The POP showed an increasing trend with increases in the cloud optical depth, liquid water path, and ice water path, reaching maxima of 50%, 60%, and 75%, respectively. However, as cloud effective radius (CER) increased, the POP changed from an increasing to a decreasing trend for a CER > 22 μm, in contrast with our perception that large particles fall more easily against updrafts, but this shift can be attributed to the transition of the cloud phase from mixed clouds to ice clouds. A high POP > 60% usually occurred in mixed clouds with vigorous ice-phase processes. There were clear differences in the microphysical properties of non-precipitating and precipitating clouds. In contrast with the vertical evolution of non-precipitating clouds with weaker reflectivity, precipitating clouds were present above 0 dBZ with a significant downward increase in reflectivity, suggesting inherent differences in cloud dynamical and microphysical processes. Our findings highlight the differences in the POP of warm and mixed clouds, suggesting that the low frequency of precipitation from water clouds should be the focus of future studies. Full article