Crystals

Advanced Technologies in Graphene-Based Materials (2nd Edition)

edited by

and

submission deadline 15 Oct 2025 | 1 articles | Viewed by 1706

Keywords: graphene and its related materials; reduced graphene oxide; carbon nanotubes; nanocomposites; synthesis and preparation; functionalization; surface characterization; coatings; (bio)sensors; energy storage devices

(This special issue belongs to the Section Hybrid and Composite Crystalline Materials)

Rare Earth-Based Crystalline Materials: Synthesis, Characterization and Applications

edited by Fuqiang Ren and Louwen Zhang

submission deadline 15 Oct 2025 | Viewed by 236

Keywords: synthesis; rare earths; characterization; nanocrystals; luminescent properties; bioimaging; optoelectronics

(This special issue belongs to the Section Inorganic Crystalline Materials)

Crystal Growth and Characterization of Intermetallic Compounds

edited by Rubén Mendoza-Cruz

submission deadline 15 Oct 2025 | Viewed by 156

Keywords: intermetallics; nanoalloys; compounds; structure; ordered phase

(This special issue belongs to the Section Crystalline Metals and Alloys)

Research on Perovskite Materials and Perovskite Solar Cells

edited by

Isaac Montoya De Los Santos

,

Maykel Courel Piedrahita

, Carlos Alonso Meza Avendaño and

Víctor Iván Moreno Oliva

submission deadline 20 Oct 2025 | Viewed by 209 | Submission Open

Keywords: perovskite solar cells; perovskite thin films; stability and degradation mechanisms; solar cell modeling; optoelectronic properties; tandem solar cells

Widespread Application of Advanced Nanomaterials

edited by

Chunbao Du

, Dan Xue and

Dinadayalane Tandabany

submission deadline 20 Oct 2025 | Viewed by 207 | Submission Open

Keywords: advanced nanomaterials; functional nanomaterials; nanocomposites; energy storage and conversion; environmental nanotechnology; smart nanomaterials; stimuli-responsive systems; photocatalysis and sensors; nano-enabled electronics and photonics; sustainable synthesis; ai-assisted materials design; nanoscale characterization; structure– property relationships; multidisciplinary applications

(This special issue belongs to the Section Hybrid and Composite Crystalline Materials)

Advanced Materials for CO₂ Reduction

edited by Dalei Sun

submission deadline 20 Oct 2025 | Viewed by 178 | Submission Open

Keywords: heterogenous catalysts; CO2 capture and utilization; CO2 reduction

(This special issue belongs to the Section Materials for Energy Applications)

Layered Materials and Their Applications

edited by

Anna Maria Cardinale

and Cristina Carbone

submission deadline 23 Oct 2025 | 1 articles | Viewed by 664 | Submission Open

Keywords: layered materials; LDH; anionic clays; composites; structure– properties relationships

(This special issue belongs to the Section Inorganic Crystalline Materials)

Emerging Perovskite Materials and Applications

edited by

Tingting Yan

and

Heinz Christoph Neitzert

submission deadline 25 Oct 2025 | 2 articles | Viewed by 1971 | Submission Open

Keywords: perovskite materials; fluorescence; efficiency; solar cells; ion doping; pressure effects; phase transition; optical properties; vibrational spectroscopy; electronic state calculations; theoretical models

(This special issue belongs to the Section Inorganic Crystalline Materials)

Research Progress of Laser Crystals

edited by Huili Zhang and

Xiaoming Duan

submission deadline 25 Oct 2025 | 1 articles | Viewed by 702 | Submission Open

Keywords: laser crystal; crystal growth; crystal structure; spectral properties; laser performance

Structure, Properties, and Applications of Nanomaterials and Thin Films

edited by

Irina Negut

submission deadline 25 Oct 2025 | Viewed by 143 | Submission Open

Keywords: nanomaterials; thin films; interface phenomena; nanostructure-property relationships; synthesis techniques; characterization methods; electronic and optical Properties; energy storage applications; biomedical nanotechnology; device integration

Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 2nd Edition

edited by

Ali Khalfallah

and Reza Beygi

submission deadline 31 Oct 2025 | 6 articles | Viewed by 8643 | Submission Open

Keywords: friction stir welding; laser welding; electron beam welding; hybrid welding; adhesive bonding; welding-based additive manufacturing (WAAM); gas metal arc welding (GMAW); gas tungsten arc welding (GTAW); shielded metal arc welding (SMAW); welding parameters and optimization; microstructure; post-weld heat treatment; grain structure; phase transformations; precipitates; defects; residual stresses; mechanical properties; non-destructive testing; fatigue analysis; fracture mechanics; weld integrity; reliability assessments

(This special issue belongs to the Section Hybrid and Composite Crystalline Materials)

Recent Achievements in Oxide Transistors

edited by Penghui He and

Dmitri Donetski

submission deadline 31 Oct 2025 | Viewed by 164 | Submission Open

Keywords: novel oxide materials; high mobility and robust stability; advanced fabrication techniques; device innovation and physics; emergent phenomena or applications

(This special issue belongs to the Section Inorganic Crystalline Materials)

The Development of Advanced Materials for Electrochemical Energy Conversion and Storage

edited by Zhipeng Yu and Hong Yin

submission deadline 1 Nov 2025 | 3 articles | Viewed by 10087 | Submission Open

Keywords: advanced materials; electrochemical energy conversion; electrochemical energy storage; water electrolysis; fuel cells; batteries; supercapacitors; nanostructured materials; composite materials; novel electrolytes; energy efficiency

(This special issue belongs to the Section Materials for Energy Applications)

Microstructure and Properties of Metals and Alloys

edited by Zhongquan Zhang,

Shouxun Ji

and Ze Chai

submission deadline 10 Nov 2025 | 8 articles | Viewed by 8544 | Submission Open

Keywords: metals/alloys; bulk materials; coatings; films; microstructure; phase; grain; interface; lattice; dislocation; vacancy; diffusion; mechanical property; strengthening; deformation; strain; electrical property; anti-corrosive property; magnetic property

(This special issue belongs to the Section Crystalline Metals and Alloys)

Research and Applications of Acoustic Metamaterials

edited by Qiujiao Du and

Qi Li

submission deadline 10 Nov 2025 | 4 articles | Viewed by 6012 | Submission Open

Keywords: acoustic metamaterial; seismic metamaterial; metasurface; noise and vibration isolation; topology; machine learning; nonlinearity; intelligent metamaterial; bound state in the continuum; cloaking

(This special issue belongs to the Section Inorganic Crystalline Materials)

Sustainable Heterogeneous Catalyst: From Structure to Application

edited by

Chiara Aliotta

and

Marco Russo

submission deadline 10 Nov 2025 | 1 articles | Viewed by 3846 | Submission Open

Keywords: heterogeneous catalyst; electrocatalysts; photocatalysts; thermal catalysts; green chemistry; structural-activity studies; biofuels platform molecules energy CO2 conversion

(This special issue belongs to the Section Materials for Energy Applications)

New Insights into Coating Materials: From Fundamentals to Material Performance

edited by Haibin Zhang

submission deadline 10 Nov 2025 | 2 articles | Viewed by 3084 | Submission Open

Keywords: coatings; coating materials; ceramic coatings; oxidation resistance; oxidation-protective coating; anti-corrosion coatings; metal surface properties; metal surface engineering; metal damage protection; surface modification; surface technology; wear-resistant; corrosion protection coating; composite coating; microstructure and performance; hardness; mechanical properties

(This special issue belongs to the Section Inorganic Crystalline Materials)

Recent Advances in Photocatalysts Materials

edited by Kristina Mojsilovic and

Stevan Stojadinović

submission deadline 10 Nov 2025 | 2 articles | Viewed by 2063 | Submission Open

Keywords: photocatalysis; heterogeneous photocatalysis; hybrid materials; hydrogen evolution; titanium; aluminum; magnesium; scanning electron microscopy; X-ray diffraction; transport properties; UV lamp; solar spectrum; LDHs; MOFs; zeolites

(This special issue belongs to the Section Materials for Energy Applications)

Surface and Interface Engineering of Metal Oxides: From Atomic-Scale Design to Applications in Catalysis, Energy and Electronics

edited by Xuefeng Chu, Chao Wang and

Pier Carlo Ricci

submission deadline 10 Nov 2025 | Viewed by 151 | Submission Open

Keywords: metal oxides; surface and interface; atomic-scale synthesis; interfacial catalysis; advanced characterization; energy applications; structure-property relationships; design and engineering; computational material design

Advanced Surface Engineering Materials: Characterization and Properties (2nd Edition)

edited by

Eleonora Bolli

,

Alessandra Varone

and

Alessandra Palombi

submission deadline 15 Nov 2025 | 3 articles | Viewed by 4087 | Submission Open

Keywords: surface characterization; ultra-thin films; surface treatments; functionalized surface; SPM techniques

(This special issue belongs to the Section Inorganic Crystalline Materials)

Advances in New Multifunctional Hard Materials

edited by Tomas Soria-Biurrun, María de Nicolás Morillas,

Hossein Besharatloo

and

Elena Gordo

submission deadline 15 Nov 2025 | 2 articles | Viewed by 3563 | Submission Open

Keywords: alternative metallic binders; alternative ceramic phases; additive manufacturing; conventional proccesing; microstructural characterization; mechanical properties

(This special issue belongs to the Section Crystalline Metals and Alloys)

Innovations in Magnetic Composites: Synthesis to Application

edited by Izabella Crăciunescu

submission deadline 15 Nov 2025 | 3 articles | Viewed by 1748 | Submission Open

Keywords: magnetic nanomaterials; composites; hybrid nanostructures; magnetoresponsive systems; applications

Innovative Insights into Deformation and Failure of Metallic Alloys

edited by

Spyros Papaefthymiou

and Vasilis Karamitros

submission deadline 15 Nov 2025 | 1 articles | Viewed by 1486 | Submission Open

Keywords: high-entropy alloys (HEAs); additively manufactured alloys; microstructural characteristics; predictive modeling; extreme loading conditions

(This special issue belongs to the Section Crystalline Metals and Alloys)

Multifunctional Metal–Organic Frameworks (MOFs) at the Interface of Chemistry and Materials Science

edited by

Zhi Lin

and Yanshu Shi

submission deadline 15 Nov 2025 | Viewed by 140 | Submission Open

Keywords: metal– organic framework; material discovery; adsorption; catalysis; crystallography; nanomaterial; sensing

(This special issue belongs to the Section Macromolecular Crystals)

Cutting-Edge Research in Plastic-Flexible Thermoelectric Materials

edited by Dongwang Yang

submission deadline 15 Nov 2025 | Viewed by 77 | Submission Open

Keywords: plastic-flexible thermoelectric materials; advanced fabrication; crystal architecture; microstructural engineering; electron– phonon– ion decoupling; machine learning

(This special issue belongs to the Section Materials for Energy Applications)

Recent Advances in III-Nitride Semiconductors and Correlated Wide Bandgap Semiconductors, 2nd Edition

edited by

Peng Chen

and

Zhizhong Chen

submission deadline 20 Nov 2025 | 9 articles | Viewed by 13123 | Submission Open

Keywords: nitrides; GaN; Ga2O3; NiO; diamond; AlScN; heterostructures; epitaxy; electro-optics devices; micro-electronics devices; power devices; integrated circuits and modules; photonic crystal enhanced light-matter interaction; photonic crystal and plasmonics

(This special issue belongs to the Section Materials for Energy Applications)

Advances in Nanocomposites: Structure, Properties and Applications

edited by

Oscar Cigarroa-Mayorga

, José Luis Casas-Espínola, Yazmin Mariela Hernández-Rodríguez and

Leonid M. Kustov

submission deadline 20 Nov 2025 | 5 articles | Viewed by 6864 | Submission Open

Keywords: electron microscopy; nanostructured materials; nanocrystals; mechanical properties; functionalization; phase transition; applied nanomaterials; advanced characterization

(This special issue belongs to the Section Hybrid and Composite Crystalline Materials)

Structural Studies in Drug Discovery and Development: From the Lead to the Pharmaceutical Form, 2nd Edition

edited by

Matteo Mori

and

Fiorella Meneghetti

submission deadline 20 Nov 2025 | 3 articles | Viewed by 3949 | Submission Open

Keywords: single-crystal X-ray diffraction; structural analysis; spectroscopic methods; spectrometric methods; pharmaceutical compounds; biologically active molecules; organic molecules; metal complexes; synthetic intermediates; atropisomers; absolute configuration; asymmetric synthesis; catalysis; mechanistic investigations; polymorphism; co-crystals; solubility

(This special issue belongs to the Section Crystal Engineering)

Single-Crystalline Composite Materials (Second Edition)

edited by

Jacek Krawczyk

,

Wlodzimierz Bogdanowicz

and

Limei Zheng

submission deadline 20 Nov 2025 | 1 articles | Viewed by 2232 | Submission Open

Keywords: single crystals; composites; crystallization; structural defects; testing methods

(This special issue belongs to the Section Hybrid and Composite Crystalline Materials)

New Horizons in Metal–Organic Frameworks: Fundamentals, Characterization, and Molecular Modeling

edited by

Jesus Baldenebro-López

and

Vladimir P. Fedin

submission deadline 20 Nov 2025 | Viewed by 307 | Submission Open

Keywords: metal– ligand interactions; tunable properties; advanced materials; metal– organic frameworks; molecular modeling

(This special issue belongs to the Section Organic Crystalline Materials)

Research on the Preparation and Performance of Photocatalytic Materials

edited by Baoying Dai

submission deadline 20 Nov 2025 | Viewed by 214 | Submission Open

Keywords: photocatalytic technology and its application; photocatalytic hydrogen evolution; photocatalytic degradation; photocatalytic disinfection; photocatalytic therapy; photocatalytic carbon dioxide reduction; promoted carrier separation; controllable preparation; high reactive site exposure; increased solar light utilization efficiency

(This special issue belongs to the Section Materials for Energy Applications)

Crystaline TiO₂ Nanotubes: From Production, Modification, to Innovative Applications

edited by

Dumitriu Cristina

submission deadline 20 Nov 2025 | Viewed by 183 | Submission Open

Keywords: crystallization of TiO2 nanotubes; TiO2 nanotubes biomedical applications; TiO2 nanotubes in dye-sensitized solar cells; TiO2 nanotubes drug delivery systems; TiO2 nanotubes antibacterial agents; TiO2 nanotubes self-cleaning substrates

Advanced Alloys for Aggressive Environments: Challenges and Breakthroughs

edited by

Pedro Javier Lloreda-Jurado

, Raquel Lopez and

Ernesto Chicardi

submission deadline 25 Nov 2025 | 1 articles | Viewed by 1403 | Submission Open

Keywords: metals; alloys; high-entropy alloys; metallic coating; additively manufactured alloys; microstructure; wear resistance; chemical stability; thermal stability; environmental durability; corrosion resistance; corrosion fatigue; high-temperature oxidation; mechanical properties; hardness testing; practical applications

(This special issue belongs to the Section Crystalline Metals and Alloys)

Optical Characterization of Functional Materials

edited by

Grazia Giuseppina Politano

submission deadline 25 Nov 2025 | 1 articles | Viewed by 550 | Submission Open

Keywords: photonic materials; optical spectroscopy; Raman; ellipsometry; graphene; TiO2; terahertz spectroscopy; crystal growth; thin films; functional materials

(This special issue belongs to the Section Materials for Energy Applications)

Materials and Their Performance Characterization in Extreme Environments

edited by Ruzhuan Wang, Yi He and

Tomasz Sadowski

submission deadline 25 Nov 2025 | Viewed by 222 | Submission Open

Keywords: failure mechanisms; multi-scale modeling; extreme environments; microstructure and macroscopic properties; design of high-performance advanced materials; advanced characterization techniques (including experimental and theoretical characterization)

(This special issue belongs to the Section Hybrid and Composite Crystalline Materials)

Solidification Processing of Metal Alloys Under External Fields

edited by

Ling Qin

, Yanchun Zhu, Jianfei Zhang,

Yang Qin

and

Marek Sroka

submission deadline 30 Nov 2025 | 1 articles | Viewed by 2307 | Submission Open

Keywords: solidification; external fields; material properties; microstructures; crystals; numerical simulation; alloys; microstructure characterization

(This special issue belongs to the Section Crystalline Metals and Alloys)

Advances in High-Performance Alloys

edited by Huihui Zhi, Cheng Wen and

Kai Guan

submission deadline 30 Nov 2025 | 2 articles | Viewed by 1220 | Submission Open

Keywords: high-entropy alloys; steels and iron alloys; magnesium alloys; aluminum alloys; copper alloys; titanium alloys; mechanical properties; corrosion resistance properties; hydrogen embrittlement; characterization; machine learning

(This special issue belongs to the Section Crystalline Metals and Alloys)

Research on Electrolytes and Energy Storage Materials (2nd Edition)

edited by

Bhargav Akkinepally

and Mengjie Chen

submission deadline 30 Nov 2025 | Viewed by 125 | Submission Open

Keywords: electrolytes; energy storage materials; batteries; supercapacitors; lithium-ion batteries; solid-state electrolytes; charge– discharge mechanisms; green technology; sustainable materials; next-generation energy storage

(This special issue belongs to the Section Materials for Energy Applications)

Research on Energy Storage Materials

edited by Feng Yu

submission deadline 8 Dec 2025 | Viewed by 175 | Submission Open

Keywords: aqueous batteries; supercapacitor; electrochemical energy storage; energy storage materials

Reviews of Crystal Engineering

edited by

Sławomir Grabowski

submission deadline 10 Dec 2025 | 6 articles | Viewed by 26351 | Submission Open

Keywords: inter- and intramolecular interactions; σ -hole and π -hole bonds; molecular crystals; cooperativity effects; structure motifs; molecular geometry; the correlation of parameters describing structures; substituent effects; structures of aromatic compounds; charge density analysis; comparison of various interactions

(This special issue belongs to the Section Crystal Engineering)

Development of Light Alloys and Their Applications

edited by

Hua Qian Ang

, Gulshan Kumar and

Erdem Karakulak

submission deadline 10 Dec 2025 | 9 articles | Viewed by 13521 | Submission Open

Keywords: light alloys; aluminium alloys; magnesium alloys; titanium alloys; deformation behaviour; alloy and development; metallurgy; material characterization

(This special issue belongs to the Section Crystalline Metals and Alloys)

Research Progress of Photoluminescent Materials

edited by Lei Han

submission deadline 10 Dec 2025 | 4 articles | Viewed by 6294 | Submission Open

Keywords: photoluminescence; luminescent materials; optoelectronic devices; advanced photonic applications; optoelectronics and photonics

(This special issue belongs to the Section Inorganic Crystalline Materials)

Growth, Structural Identification, and Characterization of Semiconductor Alloys and Low-Dimensional Heterostructures

edited by

Devki Talwar

submission deadline 10 Dec 2025 | 2 articles | Viewed by 1804 | Submission Open

Keywords: epitaxial growth including (MBE; CVD; MOCVD; etc.); group-IV elemental semiconductors and alloys; III-V; III-N; II-VI; and IV-IV compound semiconductors and alloys; designing low-dimensional heterostructures (MQWs; SLs; etc.) for devices; IR; Raman scattering; photoluminescence; spectroscopic ellipsometry; characterization techniques; etc.; simulations of structural; electronic; vibrational; and thermal transport in MQWs and SLs

(This special issue belongs to the Section Crystalline Metals and Alloys)

Thermotropic Liquid Crystals as Novel Functional Materials

edited by

Irina Cârlescu

and

Vladimir Chigrinov

submission deadline 10 Dec 2025 | 1 articles | Viewed by 540 | Submission Open

Keywords: synthesis; ferroelectrics; antiferroelectrics; structure-property relationship; investigation techniques; applications; computational modelling

(This special issue belongs to the Section Liquid Crystals)

Recent Advances in Graphene and Other Two-Dimensional Materials

edited by

Grazia Giuseppina Politano

and

John Parthenios

submission deadline 15 Dec 2025 | 7 articles | Viewed by 18517 | Submission Open

Keywords: two-dimensional materials; graphene; graphene oxide; transition metal dichalcogenides (TMDCs); graphene-based composites; 2D advanced devices and applications; functionalization of graphene; characterization techniques: electrical; electronic; optical; and mechanical properties

(This special issue belongs to the Section Inorganic Crystalline Materials)

Electronic Phenomena of Transition Metal Oxides Volume II

edited by Krzysztof Szot and

Christian Rodenbücher

submission deadline 15 Dec 2025 | 5 articles | Viewed by 16503 | Submission Open

Keywords: metal– insulator transitions and superconductivity; atomistic processes at surfaces; interfaces; and extended defects; electronic structure and lattice dynamics; redox reactions and oxygen transport; segregation and phase transformations; multiferroic properties; machine learning for transition metal oxides design and discovery

(This special issue belongs to the Section Inorganic Crystalline Materials)

Corrosion Phenomena in Metals

edited by

Jijo Christudasjustus

,

Rajeev Gupta

, Mohammad Umar Farooq Khan and Ulises Martin Diaz

submission deadline 15 Dec 2025 | 8 articles | Viewed by 15084 | Submission Open

Keywords: stress corrosion cracking; environment-assisted cracking; localized corrosion; corrosion inhibitor; high-entropy alloys; additively manufactured alloys; transmission electron microscopy; potentiodynamic polarization test; high-temperature oxidation; nanocrystalline alloys; electrochemical impedance spectroscopy; secondary phases; metallic coating; immersion test; failure initiation and propagation mechanism; corrosion mitigation; semiconductive properties; passive film; modeling; service lifetime prediction

(This special issue belongs to the Section Crystalline Metals and Alloys)

Design, Development and Processing of Aluminium Alloys and Their Composite Materials

edited by Peng Tang,

Mingyi Zheng

, Kang Wang and Xingzhi Pang

submission deadline 15 Dec 2025 | 11 articles | Viewed by 12547 | Submission Open

Keywords: aluminium matrix composite materials; composition; solidification; advanced characterization; phase composition– property correlation; recycled aluminium; green low-carbon aluminium alloy system research and development

(This special issue belongs to the Section Crystalline Metals and Alloys)

Crystal Plasticity (4th Edition)

edited by

Shiraz Mujahid

, Yub Raj Paudel and Hongjoo Rhee

submission deadline 15 Dec 2025 | 3 articles | Viewed by 2569 | Submission Open

Keywords: plasticity; computational methods; machine learning; texture evolution; microstructural mechanisms; thermomechanical processing; advanced manufacturing and metamaterials; process– structure– property relationships; metals; alloys; and intermetallics

(This special issue belongs to the Section Crystalline Metals and Alloys)

Recent Advances in Scintillator Materials

edited by

Yuriy Zorenko

submission deadline 15 Dec 2025 | 1 articles | Viewed by 852 | Submission Open

Keywords: scintillators; crystals; films; ceramics; nanopowders; melt growth; liquid-phase epitaxy; and solid-state reactions; luminescence; energy transfer processes; defects; dopants

(This special issue belongs to the Section Inorganic Crystalline Materials)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI