Next Article in Journal
A Study on Two-Stage Cold Forging for a Drive Shaft with Internal Spline and Spur Gear Geometries
Next Article in Special Issue
Quasi-Equilibrium Stress Zone with Residual Displacement Causing Permanent Slippage in Shrink-Fitted Sleeve Rolls
Previous Article in Journal
A New Approach to Simulate HSLA Steel Multipass Welding through Distributed Point Heat Sources Model
Previous Article in Special Issue
Fatigue Strength Analysis and Fatigue Damage Evaluation of Roller Chain
 
 
Article

Article Versions Notes

Metals 2018, 8(11), 952; https://doi.org/10.3390/met8110952
Action Date Notes Link
article xml file uploaded 15 November 2018 09:16 CET Original file -
article xml uploaded. 15 November 2018 09:16 CET Update https://www.mdpi.com/2075-4701/8/11/952/xml
article pdf uploaded. 15 November 2018 09:16 CET Version of Record https://www.mdpi.com/2075-4701/8/11/952/pdf
article html file updated 15 November 2018 09:18 CET Original file -
article html file updated 27 November 2018 09:00 CET Update -
article html file updated 1 April 2019 21:27 CEST Update -
article html file updated 14 April 2019 03:37 CEST Update -
article html file updated 28 April 2019 07:51 CEST Update -
article html file updated 10 October 2019 12:14 CEST Update -
article html file updated 10 February 2020 21:29 CET Update -
article html file updated 17 July 2022 09:19 CEST Update https://www.mdpi.com/2075-4701/8/11/952/html
Back to TopTop