Next Article in Journal
Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B
Previous Article in Journal
Martensite Transformation and Mechanical Properties of Polycrystalline Co-Ni-Al Alloys with Gd Doping
 
 
Article

Article Versions Notes

Metals 2018, 8(10), 849; https://doi.org/10.3390/met8100849
Action Date Notes Link
article xml file uploaded 19 October 2018 05:59 CEST Original file -
article xml uploaded. 19 October 2018 05:59 CEST Update https://www.mdpi.com/2075-4701/8/10/849/xml
article pdf uploaded. 19 October 2018 05:59 CEST Version of Record https://www.mdpi.com/2075-4701/8/10/849/pdf
article html file updated 19 October 2018 05:59 CEST Original file -
article html file updated 30 October 2018 03:21 CET Update -
article html file updated 1 April 2019 08:36 CEST Update -
article html file updated 14 April 2019 13:29 CEST Update -
article html file updated 28 April 2019 18:19 CEST Update -
article html file updated 9 October 2019 06:51 CEST Update -
article html file updated 10 February 2020 16:45 CET Update https://www.mdpi.com/2075-4701/8/10/849/html
Back to TopTop