Next Article in Journal
Experimental Study of the Mg-Ni-Y System at 673 K Using Diffusion Couples and Key Alloys
Previous Article in Journal
Constitutive Relationship Modeling and Characterization of Flow Behavior under Hot Working for Fe–Cr–Ni–W–Cu–Co Super-Austenitic Stainless Steel
Article Menu

Export Article

Open AccessArticle
Metals 2015, 5(3), 1732-1745; doi:10.3390/met5031732

Low-Temperature Mechanical Behavior of Super Duplex Stainless Steel with Sigma Precipitation

Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan 609-735, Korea
*
Author to whom correspondence should be addressed.
Academic Editor: Hugo F. Lopez
Received: 13 July 2015 / Revised: 31 August 2015 / Accepted: 15 September 2015 / Published: 18 September 2015
View Full-Text   |   Download PDF [1350 KB, uploaded 18 September 2015]   |  

Abstract

Experimental studies in various aspects have to be conducted to maintain stable applications of super duplex stainless steels (SDSS) because the occurrence rate of sigma phase, variable temperature and growth direction of sigma phase can influence mechanical performances of SDSS. Tensile tests of precipitated SDSS were performed under various temperatures to analyze mechanical and morphological behavior. View Full-Text
Keywords: super duplex stainless steel; σ phase; sub-zero tensile test; microstructure analysis; microcrack super duplex stainless steel; σ phase; sub-zero tensile test; microstructure analysis; microcrack
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Kim, S.-K.; Kang, K.-Y.; Kim, M.-S.; Lee, J.-M. Low-Temperature Mechanical Behavior of Super Duplex Stainless Steel with Sigma Precipitation. Metals 2015, 5, 1732-1745.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Metals EISSN 2075-4701 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top