Physical Properties of an Ag-Doped Bioactive Flowable Composite Resin
Abstract
:1. Introduction
2. Materials and Methods
2.1. Fabrication
2.2. Depth of Cure
2.3. Polymerization Shrinkage
2.4. Biaxial Flexural Strength
2.5. Antibacterial Properties
2.6. Statistical Analysis
3. Results
Parameter | Control | Ag-BGCOMP | p Value |
---|---|---|---|
Depth of cure ratio | 0.81 (0.06) | 0.76 (0.02) | S* |
Volumetric Polymerization shrinkage (SD) [%] | 6.47 (1.13) | 4.35 (1.21) | S* |
Biaxial flexural strength (SD) [MPa] | 75.82 (8.59) | 53.37 (9.43) | S* |
4. Discussion
5. Conclusions
Acknowledgments
Author Contributions
Conflicts of Interest
References
- Haj-Ali, R.; Walker, M.; Williams, K. Survey of general dentists regarding posterior restorations, selection criteria, and associated clinical problems. Gen. Dent. 2004, 53, 369–375. [Google Scholar]
- Bayne, S.C.; Thompson, J.Y.; Swift, E.J.; Stamatiades, P.; Wilkerson, M. A characterization of first-generation flowable composites. J. Am. Dent. Assoc. 1998, 129, 567–577. [Google Scholar] [CrossRef] [PubMed]
- Craig, R.G.; Powers, J.M. Restorative Dental Materials; Mosby: St. Louis, MO, USA, 1993; Volume 184. [Google Scholar]
- Lokhande, N.A.; Padmai, A.S.; Rathore, V.P.S.; Shingane, S.; Jayashankar, D.; Sharma, U. Effectiveness of Flowable Resin Composite in Reducing Microleakage–An In Vitro Study. J. Int. Oral Health 2014, 6, 111–114. [Google Scholar] [PubMed]
- Gallo, J.R.; Burgess, J.O.; Ripps, A.H.; Walker, R.S.; Maltezos, M.B.; Mercante, D.E.; Davidson, J.M. Three-year clinical evaluation of two flowable composites. Quintessence Intl. 2010, 41, 497–503. [Google Scholar]
- Kopperud, S.E.; Tveit, A.B.; Gaarden, T.; Sandvik, L.; Espelid, I. Longevity of posterior dental restorations and reasons for failure. Eur. J. Oral Sci. 2012, 120, 539–548. [Google Scholar] [CrossRef] [PubMed]
- Silvani, S.; Trivelato, R.F.; Nogueira, R.D.; de Souza Gonçalves, L.; Geraldo-Martins, V.R. Factors affecting the placement or replacement of direct restorations in a dental school. Contemp. Clin. Dent. 2014, 5, 54–58. [Google Scholar] [PubMed]
- Van Dijken, J.W.; Pallesen, U. A six-year prospective randomized study of a nano-hybrid and a conventional hybrid resin composite in Class II restorations. Dent. Mater. 2013, 29, 191–198. [Google Scholar] [CrossRef] [PubMed]
- Deligeorgi, V.; Mjor, I.; Wilson, N. An overview of reasons for the placement and replacement of restorations. Prim. Dent. Care 2001, 8, 5–11. [Google Scholar] [CrossRef] [PubMed]
- Suljak, J.P.; Hatibovic-Kofman, S. A fluoride release-adsorption-release system applied to fluoride-releasing restorative materials. Quintessence Intl. 1996, 27, 635–638. [Google Scholar]
- Wiegand, A.; Buchalla, W.; Attin, T. Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation. Dent. Mater. 2007, 23, 343–362. [Google Scholar] [CrossRef] [PubMed]
- Imazato, S. Antibacterial properties of resin composites and dentin bonding systems. Dent. Mater. 2003, 19, 449–457. [Google Scholar] [CrossRef]
- Imazato, S.; Imai, T.; Russell, R.; Torii, M.; Ebisu, S. Antibacterial activity of cured dental resin incorporating the antibacterial monomer MDPB and an adhesion-promoting monomer. J. Biomed. Mater. Res. 1998, 39, 511–515. [Google Scholar] [CrossRef]
- Kasraei, S.; Sami, L.; Hendi, S.; AliKhani, M.Y.; Rezaei-Soufi, L.; Khamverdi, Z. Antibacterial properties of composite resins incorporating silver and zinc oxide nanoparticles on Streptococcus mutans and Lactobacillus. Restor. Dent. Endod. 2014, 39, 109–114. [Google Scholar] [CrossRef] [PubMed]
- Craig, R.; LeGeros, R. Early events associated with periodontal connective tissue attachment formation on titanium and hydroxyapatite surfaces. J. Biomed. Mater. Res. 1999, 47, 585–594. [Google Scholar] [CrossRef]
- Ciucchi, B.; Bouillaguet, S.; Delaloye, M.; Holz, J. Volume of the internal gap formed under composite restorations in vitro. J. Dent. 1997, 25, 305–312. [Google Scholar] [CrossRef]
- Davidson, C.; De Gee, A.; Feilzer, A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J. Dent. Res. 1984, 63, 1396–1399. [Google Scholar] [CrossRef] [PubMed]
- Chatzistavrou, X.; Velamakanni, S.; DiRenzo, K.; Lefkelidou, A.; Fenno, J.C.; Kasuga, T.; Boccaccini, A.R.; Papagerakis, P. Designing dental composites with bioactive and bactericidal properties. Mater. Sci. Eng. C 2015, 52, 267–272. [Google Scholar] [CrossRef] [PubMed]
- Correa, M.; Henn, S.; Marimon, J.; Rodrigues, S., Jr.; Demarco, F. Factors influencing the microhardness of a microhybrid composite. Gen. Dent. 2009, 58, e94–e98. [Google Scholar]
- Chatzistavrou, X.; Fenno, J.C.; Faulk, D.; Badylak, S.; Kasuga, T.; Boccaccini, A.R.; Papagerakis, P. Fabrication and characterization of bioactive and antibacterial composites for dental applications. Acta Biomater. 2014, 10, 3723–3732. [Google Scholar] [CrossRef] [PubMed]
- Chatzistavrou, X.; Kontonasaki, E.; Bakopoulou, A.; Theocharidou, A.; Sivropoulou, A.; Paraskevopoulos, K.M.; Koidis, P.; Boccaccini, A.R.; Kasuga, T. Development of new sol-gel derived Ag-doped biomaterials for dental applications. In MRS Proceedings; Cambridge University Press: Cambridge, UK, 2012; Volume 1417. [Google Scholar]
- Rueggeberg, F.; Caughman, W.; Curtis, J. Effect of light intensity and exposure duration on cure of resin composite. Oper.Dent. 1994, 19, 26–26. [Google Scholar] [PubMed]
- Inoue, K.; Hayashi, I. Residual monomer (Bis-GMA) of composite resins. J. Oral Rehabil. 1982, 9, 493–497. [Google Scholar] [CrossRef] [PubMed]
- Lange, C.; Bausch, J.; Davidson, C. The curing pattern of photo-initiated dental composites. J. Oral Rehabil. 1980, 7, 369–377. [Google Scholar] [CrossRef] [PubMed]
- Lindberg, A.; Peutzfeldt, A.; van Dijken, J.W. Effect of power density of curing unit, exposure duration, and light guide distance on composite depth of cure. Clin. Oral Investig. 2005, 9, 71–76. [Google Scholar] [CrossRef] [PubMed]
- Nakfoor, B.; Yaman, P.; Dennison, J.; Herrero, A. Effect of a Light-Emitting Diode on Composite Polymerization Shrinkage and Hardness. J. Esthet. Restor. Dent. 2005, 17, 110–116. [Google Scholar] [CrossRef] [PubMed]
- Shortall, A. How light source and product shade influence cure depth for a contemporary composite. J. Oral Rehabil. 2005, 32, 906–911. [Google Scholar] [CrossRef] [PubMed]
- Kleverlaan, C.J.; Feilzer, A.J. Polymerization shrinkage and contraction stress of dental resin composites. Dent. Mater. 2005, 21, 1150–1157. [Google Scholar] [CrossRef] [PubMed]
- Price, R.; Rizkalla, A.; Hall, G. Effect of stepped light exposure on the volumetric polymerization shrinkage and bulk modulus of dental composites and an unfilled resin. Am. J. Dent. 2000, 13, 176–180. [Google Scholar] [PubMed]
- Khvostenko, D.; Mitchell, J.; Hilton, T.; Ferracane, J.; Kruzic, J. Mechanical performance of novel bioactive glass containing dental restorative composites. Dent. Mater. 2013, 29, 1139–1148. [Google Scholar] [CrossRef] [PubMed]
- Lambrechts, P.; Braem, M.; Vanherle, G. Buonocore memorial lecture. Evaluation of clinical performance for posterior composite resins and dentin adhesives. Oper. Dent. 1986, 12, 53–78. [Google Scholar]
- Shouha, P.; Swain, M.; Ellakwa, A. The effect of fiber aspect ratio and volume loading on the flexural properties of flowable dental composite. Dent. Mater. 2014, 30, 1234–1244. [Google Scholar] [CrossRef] [PubMed]
- Saravanapavan, P.; Gough, J.E.; Jones, J.R.; Hench, L.L. Antimicrobial macroporous gel-glasses: Dissolution and cytotoxicity. Key Eng. Mater. 2004, 254, 1087–1090. [Google Scholar] [CrossRef]
© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
Kattan, H.; Chatzistavrou, X.; Boynton, J.; Dennison, J.; Yaman, P.; Papagerakis, P. Physical Properties of an Ag-Doped Bioactive Flowable Composite Resin. Materials 2015, 8, 4668-4678. https://doi.org/10.3390/ma8084668
Kattan H, Chatzistavrou X, Boynton J, Dennison J, Yaman P, Papagerakis P. Physical Properties of an Ag-Doped Bioactive Flowable Composite Resin. Materials. 2015; 8(8):4668-4678. https://doi.org/10.3390/ma8084668
Chicago/Turabian StyleKattan, Hiba, Xanthippi Chatzistavrou, James Boynton, Joseph Dennison, Peter Yaman, and Petros Papagerakis. 2015. "Physical Properties of an Ag-Doped Bioactive Flowable Composite Resin" Materials 8, no. 8: 4668-4678. https://doi.org/10.3390/ma8084668