Next Article in Journal
A Novel Computational Method of Processing Map for Ti-6Al-4V Alloy and Corresponding Microstructure Study
Next Article in Special Issue
Comparison of Flank Super Abrasive Machining vs. Flank Milling on Inconel® 718 Surfaces
Previous Article in Journal
Force Prediction for Incremental Forming of Polymer Sheets
Previous Article in Special Issue
Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools
 
 
Article

Article Versions Notes

Materials 2018, 11(9), 1598; https://doi.org/10.3390/ma11091598
Action Date Notes Link
article xml file uploaded 3 September 2018 14:33 CEST Original file -
article xml uploaded. 3 September 2018 14:33 CEST Update https://www.mdpi.com/1996-1944/11/9/1598/xml
article pdf uploaded. 3 September 2018 14:33 CEST Version of Record https://www.mdpi.com/1996-1944/11/9/1598/pdf
article html file updated 3 September 2018 14:35 CEST Original file -
article html file updated 28 September 2018 12:14 CEST Update -
article html file updated 31 March 2019 14:44 CEST Update -
article html file updated 15 April 2019 05:27 CEST Update -
article html file updated 29 April 2019 09:45 CEST Update -
article html file updated 7 October 2019 09:44 CEST Update -
article html file updated 10 February 2020 08:59 CET Update -
article html file updated 20 July 2022 16:36 CEST Update https://www.mdpi.com/1996-1944/11/9/1598/html
Back to TopTop