Next Article in Journal
Study on the Effect of Ground Heat Storage by Solar Heat Using Numerical Simulation
Previous Article in Journal
Experimental Study in a Cascade Row for Improving the Performance of a Partially Admitted Turbo-Expander
Article Menu

Export Article

Open AccessArticle
Energies 2015, 8(12), 13590-13608; doi:10.3390/en81212375

A Parametric Energy Model for Energy Management of Long Belt Conveyors

Department of Electrical Electronic and Computer Engineering, University of Pretoria, Hatfield, Pretoria 0002, South Africa
*
Author to whom correspondence should be addressed.
Academic Editor: Enrico Sciubba
Received: 6 May 2015 / Revised: 6 June 2015 / Accepted: 10 July 2015 / Published: 1 December 2015
View Full-Text   |   Download PDF [502 KB, uploaded 1 December 2015]   |  

Abstract

As electricity prices continue to rise, the increasing need for energy management requires better understanding of models for energy-consuming applications, such as conveyor belts. Conveyor belts are used in a wide range of industries, including power generation, mining and mineral processing. Conveyor technological advances are leading to increasingly long conveyor belts being commissioned. Thus, the energy consumption of each individual belt conveyor unit is becoming increasingly significant. This paper proposes a generic energy model for belt conveyors with long troughed belts. The model has a two-parameter power equation, and it uses a partial differential equation to capture the variable amount of material mass per unit length throughout the belt length. Verification results show that the power consumption calculations of the newly proposed simpler model are consistent with those of a known non-linear model with an error of less than 4%. The online parameter identification set-up of the model is proposed. Simulations indicate that the parameters can be identified successfully from data with up to 15% measurement noise. Results show that the proposed model gives better predictions of the power consumed and material delivered by a long conveyor belt than the steady-state models in the current literature. View Full-Text
Keywords: conveyor belt; energy model; energy management; parameter identification conveyor belt; energy model; energy management; parameter identification
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Mathaba, T.; Xia, X. A Parametric Energy Model for Energy Management of Long Belt Conveyors. Energies 2015, 8, 13590-13608.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Energies EISSN 1996-1073 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top