Next Article in Journal
Alternating Additive Manufacturing and Forming—An Innovative Manufacturing Approach
Previous Article in Journal
Understanding Inhomogeneous Mechanical Properties in PBF-LB/M Manufactured Parts Due to Inhomogeneous Macro Temperature Profiles Based on Process-Inherent Preheating
Previous Article in Special Issue
Recoater-Induced Distortions and Build Failures in Selective Laser Melting of Thin-Walled Ti6Al4V Parts
 
 
Review

Article Versions Notes

J. Manuf. Mater. Process. 2023, 7(3), 89; https://doi.org/10.3390/jmmp7030089
Action Date Notes Link
article xml file uploaded 5 May 2023 12:13 CEST Original file -
article xml uploaded. 5 May 2023 12:13 CEST Update -
article pdf uploaded. 5 May 2023 12:13 CEST Version of Record https://www.mdpi.com/2504-4494/7/3/89/pdf-vor
article html file updated 5 May 2023 12:16 CEST Original file -
article xml file uploaded 6 June 2023 08:03 CEST Update -
article xml uploaded. 6 June 2023 08:04 CEST Update https://www.mdpi.com/2504-4494/7/3/89/xml
article pdf uploaded. 6 June 2023 08:04 CEST Updated version of record https://www.mdpi.com/2504-4494/7/3/89/pdf
article html file updated 6 June 2023 08:06 CEST Update https://www.mdpi.com/2504-4494/7/3/89/html
Back to TopTop