Next Article in Journal
Some Properties of Composite Drone Blades Made from Nanosilica Added Epoxidized Natural Rubber
Next Article in Special Issue
Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density
Previous Article in Journal
Ultra-High Through-Cure of (Meth)Acrylate Copolymers via Photofrontal Polymerization
Previous Article in Special Issue
3D Direct Printing of Silicone Meniscus Implant Using a Novel Heat-Cured Extrusion-Based Printer
 
 
Article

Article Versions Notes

Polymers 2020, 12(6), 1292; https://doi.org/10.3390/polym12061292
Action Date Notes Link
article pdf uploaded. 4 June 2020 15:25 CEST Version of Record https://www.mdpi.com/2073-4360/12/6/1292/pdf-vor
article xml file uploaded 28 June 2020 11:50 CEST Original file -
article xml uploaded. 28 June 2020 11:50 CEST Update https://www.mdpi.com/2073-4360/12/6/1292/xml
article pdf uploaded. 28 June 2020 11:50 CEST Updated version of record https://www.mdpi.com/2073-4360/12/6/1292/pdf
article html file updated 28 June 2020 11:52 CEST Original file -
article html file updated 21 July 2022 07:04 CEST Update https://www.mdpi.com/2073-4360/12/6/1292/html
Back to TopTop