Next Article in Journal
Catalyst-Controlled Site-Selectivity Switching in Pd-Catalyzed Cross-Coupling of Dihaloarenes
Previous Article in Journal
New Trends in Gold Catalysts
Previous Article in Special Issue
Structured Perovskite-Based Catalysts and Their Application as Three-Way Catalytic Converters—A Review
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Perovskite Catalysts—A Special Issue on Versatile Oxide Catalysts

1
Department of Chemical Engineering, National Cheng Kung University, No. 1, University Rd., Tainan City, 701 Taiwan
2
Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506, USA
*
Author to whom correspondence should be addressed.
Catalysts 2014, 4(3), 305-306; https://doi.org/10.3390/catal4030305
Submission received: 28 July 2014 / Accepted: 1 August 2014 / Published: 7 August 2014
(This article belongs to the Special Issue Perovskite Catalysts)
Perovskite-type catalysts have been prominent oxide catalysts for many years due to attributes such as flexibility in choosing cations, significant thermal stability, and the unique nature of lattice oxygen. Nearly 90% metallic elements of the Periodic Table can be stabilized in perovskite’s crystalline framework [1]. Moreover, by following the Goldschmidt rule [2], the A- and/or B-site elements can be partially substituted, making perovskites extremely flexible in catalyst design. One successful example is the commercialization of noble metal-incorporated perovskites (e.g., LaFe0.57Co0.38Pd0.05O3) for automotive emission control used by Daihatsu Motor Co. Ltd. [3]. Thus, growing interest in, and application of perovskites in the fields of material sciences, heterogeneous catalysis, and energy storage have prompted this Special Issue on perovskite catalysts.
This issue includes one review and three articles. The review, contributed by Keav et al. [4], scrutinizes perovskites as three-way catalysts. Catalyst design by B-site element selection, noble metal incorporation, catalyst preparation and implementation of perovskites in three-way catalytic (TWC) convertors are particularly emphasized. Mirzababaei and Chuang [5] discovered that by coating a thin film (approximately 40 µm) of La0.6Sr0.4Co0.2Fe0.8O3 perovskite on the surface of an Ni/YSZ anode, the stability of the anode increased significantly in a direct methane solid oxide fuel cell. Oxidation activities of methane and deposited carbon of the coated perovskite is therefore proposed. Mierwaldt et al. [6] studied the surface chemistry of Pr1−xCaxMnO3 (x = 0, 0.3, 0.5, and 0.8) using ex/in situ XANES and XPS analyses. During oxygen evolution in electro-catalytic water splitting, the Mn ions can be reduced to a bivalent state as oxygen vacancies are formed on the surface of perovskite. They also discovered that the reduced surface can be transformed into its original state by adopting a low temperature (120 °C) annealing in an oxidative environment. Dos Santos et al. [7] used the ethylenediaminetetraacetic acid-citric acid method to prepare monophasic crystalline LaNi0.3Co0.7O3−δ and SrFe0.2Co0.8O3−δ, and investigated their performance in CO oxidation. The LaNi0.3Co0.7O3−δ showed higher activity than SrFe0.2Co0.8O3−δ at temperatures over 150 °C. The interactions between A and B site elements and their ionic radius most likely modified the CO oxidation behavior.
Indeed, these four publications are significant contributions to the research community, and reveal future opportunities for further research on perovskites. We appreciate the efforts taken by the aforementioned groups.
Finally, we appreciate editorial staffs for handling all the editorial processes, and the valuable comments provided by anonymous reviewers.

References

  1. Pena, M.A.; Fierro, J.L.G. Chemical Structures and Performance of Perovskite Oxides. Chem. Rev. 2001, 101, 1981–2018. [Google Scholar] [CrossRef]
  2. Goldschmidt, V.M. Geochemische Verteilungsgesetze der Elemente. In Norsk Videnskaps-Akademi i Oslo. Skrifter. I. Mathematisk-Naturvidenskabelig Klasse; I kommisjon hos J. Dybwad: Oslo, Norway, 1926; Volume 8. [Google Scholar]
  3. Nishihata, Y.; Mizuki, J.; Akao, T.; Tanaka, H.; Uenishi, M.; Kimura, M.; Okamoto, T.; Hamada, N. Self-regeneration of a Pd-perovskite catalyst for automotive emissions control. Nature 2002, 418, 164–167. [Google Scholar] [CrossRef]
  4. Keav, S.; Matam, S.; Ferri, D.; Weidenkaff, A. Structured Perovskite-Based Catalysts and Their Application as Three-Way Catalytic Converters-A Review. Catalysts 2014, 4, 226–255. [Google Scholar] [CrossRef]
  5. Mirzababaei, J.; Chuang, S. La0.6Sr0.4Co0.2Fe0.8O3 Perovskite: A Stable Anode Catalyst for Direct Methane Solid Oxide Fuel Cells. Catalysts 2014, 4, 146–161. [Google Scholar] [CrossRef]
  6. Mierwaldt, D.; Mildner, S.; Arrigo, R.; Knop-Gericke, A.; Franke, E.; Blumenstein, A.; Hoffmann, J.; Jooss, C. In Situ XANES/XPS Investigation of Doped Manganese Perovskite Catalysts. Catalysts 2014, 4, 129–145. [Google Scholar] [CrossRef]
  7. Dos Santos, A.; Arab, M.; Patout, L.; de Souza, C. LaNi0.3Co0.7O3−δ and SrFe0.2Co0.8O3−δ Ceramic Materials: Structural and Catalytic Reactivity under CO Stream. Catalysts 2014, 4, 77–88. [Google Scholar] [CrossRef]

Share and Cite

MDPI and ACS Style

Lin, Y.-C.; Hohn, K.L. Perovskite Catalysts—A Special Issue on Versatile Oxide Catalysts. Catalysts 2014, 4, 305-306. https://doi.org/10.3390/catal4030305

AMA Style

Lin Y-C, Hohn KL. Perovskite Catalysts—A Special Issue on Versatile Oxide Catalysts. Catalysts. 2014; 4(3):305-306. https://doi.org/10.3390/catal4030305

Chicago/Turabian Style

Lin, Yu-Chuan, and Keith L. Hohn. 2014. "Perovskite Catalysts—A Special Issue on Versatile Oxide Catalysts" Catalysts 4, no. 3: 305-306. https://doi.org/10.3390/catal4030305

Article Metrics

Back to TopTop