Next Article in Journal
Fretting Fatigue Analysis of Additively Manufactured Blade Root Made of Intermetallic Ti-48Al-2Cr-2Nb Alloy at High Temperature
Next Article in Special Issue
Impact-Sliding Tribology Behavior of TC17 Alloy Treated by Laser Shock Peening
Previous Article in Journal
Characterization of Graphite Oxide and Reduced Graphene Oxide Obtained from Different Graphite Precursors and Oxidized by Different Methods Using Raman Spectroscopy
Previous Article in Special Issue
The Application of Globular Water-Atomized Iron Powders for Additive Manufacturing by a LENS Technique
 
 
Article

Article Versions Notes

Materials 2018, 11(7), 1051; https://doi.org/10.3390/ma11071051
Action Date Notes Link
article xml file uploaded 21 June 2018 08:58 CEST Original file -
article xml uploaded. 21 June 2018 08:58 CEST Update https://www.mdpi.com/1996-1944/11/7/1051/xml
article pdf uploaded. 21 June 2018 08:58 CEST Version of Record https://www.mdpi.com/1996-1944/11/7/1051/pdf
article html file updated 21 June 2018 09:00 CEST Original file -
article html file updated 1 August 2018 14:30 CEST Update -
article html file updated 30 March 2019 12:44 CET Update -
article html file updated 16 April 2019 04:01 CEST Update -
article html file updated 30 April 2019 09:01 CEST Update -
article html file updated 4 October 2019 19:11 CEST Update -
article html file updated 9 February 2020 22:15 CET Update -
article html file updated 16 July 2022 21:55 CEST Update https://www.mdpi.com/1996-1944/11/7/1051/html
Back to TopTop