Next Article in Journal
Carbide Precipitation during Tempering and Its Effect on the Wear Loss of a High-Carbon 8 Mass% Cr Tool Steel
Next Article in Special Issue
The Influence of Clamping Pressure on Joint Formation and Mechanical Performance of Ti6Al4V/CF-PEEK Friction-Riveted Joints
Previous Article in Journal
Viscoelastic Mechanical Responses of HMAP under Moving Load
Previous Article in Special Issue
Fundamentals of Force-Controlled Friction Riveting: Part I—Joint Formation and Heat Development
 
 
Article

Article Versions Notes

Materials 2018, 11(12), 2489; https://doi.org/10.3390/ma11122489
Action Date Notes Link
article xml file uploaded 7 December 2018 12:19 CET Original file -
article xml uploaded. 7 December 2018 12:19 CET Update https://www.mdpi.com/1996-1944/11/12/2489/xml
article pdf uploaded. 7 December 2018 12:19 CET Version of Record https://www.mdpi.com/1996-1944/11/12/2489/pdf
article html file updated 7 December 2018 12:20 CET Original file -
article html file updated 26 December 2018 19:43 CET Update -
article html file updated 2 April 2019 09:32 CEST Update -
article html file updated 13 April 2019 18:15 CEST Update -
article html file updated 27 April 2019 22:23 CEST Update -
article html file updated 11 October 2019 15:05 CEST Update -
article html file updated 11 February 2020 01:51 CET Update -
article html file updated 17 July 2022 13:59 CEST Update https://www.mdpi.com/1996-1944/11/12/2489/html
Back to TopTop