Correction: Saharuddin, N.Z.; et al. A Power System Network Splitting Strategy Based on Contingency Analysis. Energies 2018, 11, 434

The authors wish to make the following corrections to this paper [1]. On page 1, the third author’s name should be changed from Hazlie Mohklis to Hazlie Mokhlis.

Furthermore, on page 12, in

Table 5. IEEE 118 data after network splitting for Case A.

Islands	Buses Info	Optimal Network Splitting Solution (Cutsets)	∑Pdisrup (MW)	Generators Info		Active Power				Load Shed
						Before Load Shed		After Load Shed
				Gen	Max Limit (MW)	Total Pgen (MW)	Total Pload (MW)	Total Pgen (MW)	Total Pload (MW)	(MW)
Island 1	1–39, 71–73, 113–115, 117	37–40, 39–40, 34–43, 38–65, 24–70, 70–71	217.4137	G10	300	300	1167.0	300	1079	88
				G12	100	100		100
				G25	200	200		200
				G26 *	420	420		417.603
				G31	100	100		100
				-	∑1120	∑1120	∑1167.0	∑1117.603	∑1079
Island 2	40–70, 74–112, 116, 118			G46	100	19	3075	19	3075	-
				G49	200	204		204
				G54	140	48		48
				G59	250	155		155
				G61	160	160		160
				G65	400	391		391
				G66	400	392		392
				G69 *	800	537.421		537.421
				G80	500	477		477
				G87	100	4		4
				G89	600	500		500
				G100	300	252		252
				G103	100	40		40
				G111	100	36		36
				-	∑4150	∑3211.42	∑3075	∑3211.42	∑3075

* slack bus, ∑ = total.

, ∑1099.98 is changed to ∑1117.603 in the ninth column, eighth row; and ∑1061.97 changed to ∑1079 in the tenth column, fourth row. The correct version of the table is thus:

The authors would like to apologize for any inconvenience caused to the readers by these changes. The manuscript will be updated, and the original version will remain available on the article webpage.