Next Article in Journal
A Framework for UWB-Based Communication and Location Tracking Systems for Wireless Sensor Networks
Next Article in Special Issue
Coexistence of WiFi and WiMAX Systems Based on PS-Request Protocols
Previous Article in Journal
A Programmable Plug & Play Sensor Interface for WSN Applications
Previous Article in Special Issue
Adaptive Redundant Speech Transmission over Wireless Multimedia Sensor Networks Based on Estimation of Perceived Speech Quality
Article Menu

Export Article

Open AccessArticle
Sensors 2011, 11(9), 9033-9044; doi:10.3390/s110909033

The Design of RFID Conveyor Belt Gate Systems Using an Antenna Control Unit

Department of Electronic Engineering, Dongguk University, 3-26, Pil-dong, Joong-gu, Seoul, Korea
Author to whom correspondence should be addressed.
Received: 21 August 2011 / Revised: 13 September 2011 / Accepted: 20 September 2011 / Published: 21 September 2011
(This article belongs to the Special Issue Selected Papers from FGIT 2010)
View Full-Text   |   Download PDF [466 KB, uploaded 21 June 2014]   |  


This paper proposes an efficient management system utilizing a Radio Frequency Identification (RFID) antenna control unit which is moving along with the path of boxes of materials on the conveyor belt by manipulating a motor. The proposed antenna control unit, which is driven by a motor and is located on top of the gate, has an array structure of two antennas with parallel connection. The array structure helps improve the directivity of antenna beam pattern and the readable RFID distance due to its configuration. In the experiments, as the control unit follows moving materials, the reading time has been improved by almost three-fold compared to an RFID system employing conventional fixed antennas. The proposed system also has a recognition rate of over 99% without additional antennas for detecting the sides of a box of materials. The recognition rate meets the conditions recommended by the Electronic Product Code glbal network (EPC)global for commercializing the system, with three antennas at a 20 dBm power of reader and a conveyor belt speed of 3.17 m/s. This will enable a host of new RFID conveyor belt gate systems with increased performance. View Full-Text
Keywords: RFID tag; RFID conveyor belt gate system; antenna control unit; recognition rate RFID tag; RFID conveyor belt gate system; antenna control unit; recognition rate

This is an open access article distributed under the Creative Commons Attribution License (CC BY 3.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Park, C.R.; Lee, S.J.; Eom, K.H. The Design of RFID Conveyor Belt Gate Systems Using an Antenna Control Unit. Sensors 2011, 11, 9033-9044.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Sensors EISSN 1424-8220 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top