Performance Optimization of a Conical Dielectric Elastomer Actuator
AbstractDielectric elastomer actuators (DEAs) are known as ‘artificial muscles’ due to their large actuation strain, high energy density and self-sensing capability. The conical configuration has been widely adopted in DEA applications such as bio-inspired locomotion and micropumps for its good compactness, ease for fabrication and large actuation stroke. However, the conical protrusion of the DEA membrane is characterized by inhomogeneous stresses, which complicate their design. In this work, we present an analytical model-based optimization for conical DEAs with the three biasing elements: (I) linear compression spring; (II) biasing mass; and (III) antagonistic double-cone DEA. The optimization is to find the maximum stroke and work output of a conical DEA by tuning its geometry (inner disk to outer frame radius ratio a/b) and pre-stretch ratio. The results show that (a) for all three cases, stroke and work output are maximum for a pre-stretch ratio of 1 × 1 for the Parker silicone elastomer, which suggests the stretch caused by out-of-plane deformation is sufficient for this specific elastomer. (b) Stroke maximization is obtained for a lower a/b ratio while a larger a/b ratio is required to maximize work output, but the optimal a/b ratio is less than 0.3 in all three cases. (c) The double-cone configuration has the largest stroke while single cone with a biasing mass has the highest work output. View Full-Text
- Supplementary File 1:
PDF-Document (PDF, 499 KB)
Share & Cite This Article
Cao, C.; Conn, A.T. Performance Optimization of a Conical Dielectric Elastomer Actuator. Actuators 2018, 7, 32.
Cao C, Conn AT. Performance Optimization of a Conical Dielectric Elastomer Actuator. Actuators. 2018; 7(2):32.Chicago/Turabian Style
Cao, Chongjing; Conn, Andrew T. 2018. "Performance Optimization of a Conical Dielectric Elastomer Actuator." Actuators 7, no. 2: 32.
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.