Materials, Volume 12, Issue 7

The aim of the present investigation was to study the anti-oxidant effect of chitosan nanoparticles on a human SH-SY5Y neuroblastoma cell line using a rotenone model to generate reactive oxygen species. Chitosan nanoparticles were synthesized using a...

The present study deals with the synthesis, characterization, and DNA extraction of poly(4,4′-cyclohexylidene bisphenol oxalate)/silica (Si) nanocomposites (NCs). The effects of varying the monomer/Si (3.7%, 7%, and 13%) ratio towards the size...

With the continuous development and progress of materials science, increasingly more attention has been paid to the new technology of powder synthesis and material preparation. The hydrothermal method is a promising liquid phase preparation technolog...

The production of modern machines requires parts with much greater geometric accuracy and surface geometry (SG) precision than several years ago. These requirements are met by so-called hybrid technologies that must simultaneously be inexpensive to i...

Pyoverdine is a fluorescent siderophore produced by Pseudomonas aeruginosa that can be considered as a detectable marker in nosocomial infections. The presence of pyoverdine in water can be directly linked to the presence of the P. aeruginosa, thus b...

Urchin-like mullite whiskers synthesized by the vapor–liquid–solid growth method were used to improve the high-temperature performance of porous gelcast SiO₂-based ceramic molds. Aluminum was used to facilitate the synthesis of polycrysta...

Environmentally friendly superhydrophilic and superhydrophobic sponges were synthesized using a one-step approach for oil/water separation. A superhydrophilic or superhydrophobic sponge (MFS/CC-DKGM or MFS/CC-PDMS) was synthesized by one-step coating...

Lead silicate glasses are fundamental materials to a microchannel plate (MCP), which is a two dimensional array of a microscopic channel charge particle multiplier. Hydrogen reduction is the core stage to determine the electrical conductivity of lead...

(1) Background: When pulp exposure occurs, reparative dentinogenesis can be induced by direct pulp capping to maintain the vitality and function of the tissue. The aim of this work was to assess the cytotoxicity and bioactivity of three different dir...

Many structural components made of composite materials need an accurate thickness control during fabrication and/or maintenance. In this regard, various non-destructive techniques can be used for the online measuring of thickness of large components...

We evaluated the shear bond strength of bone–implant contact, or osseointegration, in the rabbit tibia model, and compared the strength between grades 2 and 4 of commercially pure titanium (cp-Ti). A total of 13 grades 2 and 4 cp-Ti implants we...

This study’s aim was to evaluate the biocompatibility and bioabsorption of a new membrane for guided bone regeneration (polylactic-co-glycolic acid associated with hydroxyapatite and β-tricalcium phosphate) with three thicknesses (200, 500...

Mg alloys are expected to be used in fields of the transportation industry because of their lightweight property, however, they show low corrosion resistance. To improve the corrosion resistance, preparation of the protective film on Mg alloys is ess...

Based on semi-solid mixing technology, two kinds of as-cast Grp (Graphite particles)/AZ91 composites with different Grp volume fractions (5 vol %, 10 vol %) were prepared; these are called 5 vol % Grp/AZ91 composites and 10 vol % Grp/AZ91 composites,...

Bitumen aging can lead to the deterioration of asphalt pavement performance, shortening the service life of road. In order to solve the problem that current studies on the ultraviolet (UV) aging of bitumen either ignore the effects of natural environ...

Underground ant nests are typically made of soil and rubble mixed with dead plant bodies, ant secretions, and other organic substances. The clay content is high, and the natural clay materials show pozzolanic activity after calcination. In this study...

In this research, the mechanical behavior of undoped n-type GaAs was investigated by nanoindentation experiments using two types of indenters—Berkovich and flat-tip—with force applied up to 1000 mN. From the measured force-depth curves, a...

Well-designed nanostructures are very important for the electrochemical performance of lithium-ion electrode materials. In order to improve the electrochemical performance of ZnO-based anode materials, ZnO/Ni composite film, assembled by ordered holl...

This study investigates the effect of aluminum (Al) on the microstructure, micro-hardness, and wettability of environmentally friendly Sn-20Bi-xAl (x = 0, 0.1, 0.3, 0.5 (wt.%)) solder alloys. Scanning electron microscopy (SEM) with energy dispersive...

This article presents results from non-destructive testing (NDT) that referred to the location and diameter or rebars in beam and slab members. The aim of paper was to demonstrate that the accuracy and deviations of the NDT methods could be higher th...

Contact resistance is a major characteristic of organic transistors, and its importance has received renewed attention due to the recent revelation of mobility overestimation. In this article, we propose a method to describe the contact resistance as...

Copper oxide is one of the promising oxygen carrier materials in chemical looping with oxygen uncoupling (CLOU) technology, cycling between Cu₂O and CuO. In this study, a multiscale model was developed to describe the oxidation kinetics of the Cu-bas...

Laser repairing and plasma arc repairing experiments on the single-crystal Ni-based superalloy DD407(Ni-7.82Cr-5.34Co-2.25Mo-4.88W-6.02Al-1.94Ti-3.49Ta in wt.%) were carried out in this paper, and the differences in microstructures and mechanical pro...

The purpose of this study is to improve the performance of walls under out-of-plane loads especially when subjected to the hammering action of the floors. The idea behind the paper is to provide the masonry walls with a device that behaves like a but...

Alkali activation is studied as a potential technology to produce a group of high performance building materials from industrial residues such as metallurgical slag. Namely, slags containing aluminate and silicate form a useful solid material when ac...

Although mesh use has significantly improved the outcomes of hernia and pelvic organ prolapse repair, long-term recurrence rates remain unacceptably high. We aim to determine the in vivo degradation and functional outcome of reconstructed abdominal w...

Superheavy forgings are increasingly used in the nuclear industry. The strain rate is extremely low during hot forging due to the huge size of the superheavy forging; in fact, the surface temperature of the forging decreases obviously during each def...

The superhydrophobic surface can change the friction property of the material, reduce the adhesion of the friction interface, and produce a certain slip, thereby reducing the friction coefficient. The laser has high energy, high density, and is espec...

The versatile crystal structure of tetragonal tungsten bronzes (A1₂A2₄C₄B₁₀O₃₀) can accommodate complex stoichiometries including cations in different valence states and vacant cation sites. Here, we report on the effect of thermally induced cation-v...

Blind fasteners are of special interest for aircraft construction since they allow working on joints where only one side is accessible, as is the case in many common aerospace box-type structures, such as stabilizers and flaps. This paper aims to del...

Heat treatment at different temperatures was carried out on a Ti₃Al linear friction welding joint. The characteristics and evolution of the microstructure in the weld zone (WZ) and the thermo-mechanically affected zone (TMAZ) of the Ti₃Al LFW joint w...

Chitin was extracted from local snow crab shell waste and used as a raw material in the fabrication of porous spherical microgels. The chitin microgels were obtained using a batch process of emulsification and, afterward, gelation. The effects of chi...

This in vitro study investigated the impact of various dentifrices on the shade, translucency, gloss, and surface characteristics of polishing- or glazing-finished monolithic zirconia surfaces after simulated toothbrushing. Eighty square-shaped monol...

The optical properties of WSe₂-layered crystals doped with 0.5% niobium (Nb) grown by the chemical vapor transport method were characterized by piezoreflectance (PzR), photoconductivity (PC) spectroscopy, frequency-dependent photocurrent, and time-re...

Smoothed particle hydrodynamics (SPH) and the finite element method (FEM) are often combined with the scope to model the interaction between structures and the surrounding fluids (FSI). There is the case, for instance, of aircrafts crashing on water...

A rapid and effective method is necessary in the disposal of severely radioactive contaminated soil waste. Simulated Ce-bearing radioactive soil waste was immobilized by self-propagating high-temperature synthesis (SHS) within 5 min in this study. Th...

The paper presents the characteristics of damage of bricks in masonry structures of significant historical value as a result of cyclic freezing and thawing. Based on extensive investigation, which included macroscopic description, determination of co...

To investigate the superhydrophobic properties of different surface textures, nine designs of textures with micro-nanostructures were produced successfully using the laser engraving technique on the surfaces of composite insulator umbrella skirt samp...

This paper is part of a research line focused on the reduction of the use of cement in the industry. In this work, the study of work methodologies for the manufacture of green cementitious grout mixtures is studied. Grout is widely used in constructi...

Based on the metal magnetic memory effect, this paper proposed a new non-destructive testing method for the internal tensile force detection of steel bars by analyzing the self-magnetic flux leakage (SMFL) signals. The variation of the SMFL signal of...

The objective of the experimental work is to study the mechanical properties in self-compacting concretes (SCC) in which part of the limestone aggregate has been replaced by granulated blast furnace slag (GBFS) in different percentages ranging from 0...

Generally, crop straw degrades slowly in soil, which is unfavorable for tillage and next crop growth. Thus, it is important to develop a promising technology to boost degradation of straw. Herein, a nanobiosystem has been developed by loading bacteri...

This work reports the production and characterization of biodegradable and eco-friendly films based on cashew gum polysaccharide (CGP) and polyvinyl alcohol (PVA), using the statistical design strategy. Results show that CGP/PVA films are pH stimuli-...

The aim of this research is to investigate the effect of LiNO₃ on the alkali–silica reaction (ASR) expansion of reactive sandstone and the mechanism through which this occurs. This paper presents the results from tests carried out on rock prism...

The present paper deals with the retrofitting of unreinforced masonry (URM) buildings, subjected to in-plane shear and out of-plane loading when struck by an earthquake. After an introductive comparison between some of the latest punctual and continu...

Although well-recognized in the fields of structural and material design and widely present in engineering literature, topology optimization still arouses a high interest within research communities. Moreover, it is observed that the development of i...

Microcrack formation and delamination growth are the main damage mechanisms in the fatigue of composites. They lead to significant stiffness loss, introduce stress concentrations and can be the origin of subsequent damage events like buckling or fibr...

Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced...

To explore a novel high strength and low modulus ultralight-weight complex concentrated alloys (ULW-CCAs), a series of light alloys are designed and explored based on some low-density and low modulus elements, such as Al, Li, Mg, Ca, Si, and Y. An Al...

Ceramic foams are promising, highly porous materials, with a wide range of specific surface area and low fluid flow resistance, which are well-suited for filtering applications. They are comprised mainly of macrovoids that are interconnected with str...