Search Results (54)

Non-destructive testing (NDT) and non-destructive evaluation (NDE) are essential tools for ensuring the structural integrity, safety, and reliability of critical systems across the aerospace, civil infrastructure, energy, and advanced manufacturing sectors. As engineered materials evolve into increasingly complex architectures such as fiber-reinforced polymers, fiber–metal laminates, sandwich composites, and functionally graded materials, traditional NDT techniques face growing limitations in sensitivity, adaptability, and diagnostic reliability. This comprehensive review presents a multi-dimensional classification of NDT/NDE methods, structured by physical principles, functional objectives, and application domains. Special attention is given to hybrid and multi-material systems, which exhibit anisotropic behavior, interfacial complexity, and heterogeneous defect mechanisms that challenge conventional inspection. Alongside established techniques like ultrasonic testing, radiography, infrared thermography, and acoustic emission, the review explores emerging modalities such as capacitive sensing, electromechanical impedance, and AI-enhanced platforms that are driving the future of intelligent diagnostics. By synthesizing insights from the recent literature, the paper evaluates comparative performance metrics (e.g., sensitivity, resolution, adaptability); highlights integration strategies for embedded monitoring and multimodal sensing systems; and addresses challenges related to environmental sensitivity, data interpretation, and standardization. The transformative role of NDE 4.0 in enabling automated, real-time, and predictive structural assessment is also discussed. This review serves as a valuable reference for researchers and practitioners developing next-generation NDT/NDE solutions for hybrid and high-performance structures. Full article

Additive manufacturing (AM) has revolutionized production across industries, yet persistent challenges in defect detection and process reliability necessitate advanced in situ monitoring solutions. While non-destructive evaluation (NDE) techniques such as X-ray computed tomography, thermography, and ultrasonic testing have been widely adopted, the critical role of 3D surface topographic monitoring remains underutilized for real-time anomaly detection. This work comprehensively reviews the 3D surface monitoring of AM processes, such as Laser powder bed fusion, directed energy deposition, material extrusion, and material jetting, highlighting the current state and challenges. Furthermore, the article discusses the state-of-the-art advancements in closed-loop feedback control systems, sensor fusion, and machine learning algorithms to integrate 3D surface data with various process signatures to dynamically adjust laser parameters and scan strategies. Guidance has been provided on the best 3D monitoring technique for each of the AM processes. Motivated by manufacturing labor shortages, the high skill required to operate and troubleshoot some of these additive manufacturing techniques, and zero-defect manufacturing goals, this paper also explores the metamorphosis towards autonomous AM systems and adaptive process optimization and explores the role and importance of real-time 3D monitoring in that transition. Full article

In the field of nondestructive evaluation (NDE) using ultrasonic guided waves, accurately assessing the aging failure of insulation coatings remains a challenging and prominent research topic. While the application of ultrasonic guided waves in material testing has been extensively explored in the existing literature, there is still a significant gap in quantitatively evaluating the aging failure of insulation coatings. This study innovatively proposes an NDE method for assessing insulation coating aging failure by integrating signal processing and machine learning technologies, thereby effectively addressing both theoretical and practical gaps in this domain. The proposed method not only enhances the accuracy of detecting insulation coating aging failure but also introduces new approaches to non-destructive testing technology in related fields. To achieve this, an accelerated aging experiment was conducted to construct a cable database encompassing various degrees of damage. The effects of aging time, temperature, mechanical stress, and preset defects on coating degradation were systematically investigated. Experimental results indicate that aging time exhibits a three-stage nonlinear evolution pattern, with 50 days marking the critical inflection point for damage accumulation. Temperature significantly influences coating damage, with 130 °C identified as the critical threshold for performance mutation. Aging at 160 °C for 100 days conforms to the time-temperature superposition principle. Additionally, mechanical stress concentration accelerates coating failure when the bending angle is ≥90°. Among preset defects, cut defects were most destructive, increasing crack density by 5.8 times compared to defect-free samples and reducing cable life to 40% of its original value. This study employs Hilbert–Huang Transform (HHT) for noise reduction in ultrasonic guided wave signals. Compared to Fast Fourier Transform (FFT), HHT demonstrates superior performance in feature extraction from ultrasonic guided wave signals. By combining HHT with machine learning techniques, we developed a hybrid prediction model—HHT-LightGBM-PSO-SVM. The model achieved prediction accuracies of 94.05% on the training set and 88.36% on the test set, significantly outperforming models constructed with unclassified data. The LightGBM classification model exhibited the highest classification accuracy and AUC value (0.94), highlighting its effectiveness in predicting coating aging damage. This research not only improves the accuracy of detecting insulation coating aging failure but also provides a novel technical means for aviation cable health monitoring. Furthermore, it offers theoretical support and practical references for nondestructive testing and life prediction of complex systems. Future studies will focus on optimizing model parameters, incorporating additional environmental factors such as humidity and vibration to enhance prediction accuracy, and exploring lightweight algorithms for real-time monitoring. Full article

Fire incidents pose significant threats to the structural integrity of reinforced concrete buildings, often necessitating comprehensive rehabilitation to restore safety and functionality. Effective rehabilitation of fire-damaged structures relies heavily on accurate damage assessment, which can be challenging with traditional invasive methods. This paper explores the impact of severe damage due to fire exposure on the mechanical behavior of steel-fiber-reinforced concrete (SFRC) using nondestructive evaluation (NDE) techniques. After being exposed to direct fire, the SFRC specimens are subjected to fracture testing to assess their mechanical properties. NDE techniques, specifically acoustic emission (AE) and ultrasonic pulse velocity (UPV), are employed to assess fire-induced damage. The primary aim of this study is to reveal that AE parameters—such as amplitude, cumulative hits, and energy—are strongly correlated with mechanical properties and damage of SFRC due to fire. Additionally, AE monitoring is employed to assess structural integrity throughout the loading application. The distribution of AE hits and the changes in specific AE parameters throughout the loading can serve as valuable indicators for differentiating between healthy and thermally damaged concrete. Compared to the well-established relationship between UPV and strength in bending and compression, the sensitivity of AE to fracture events shows its potential for in situ application, providing new characterization capabilities for evaluating the post-fire mechanical performance of SFRC. The test results of this study reveal the ability of the examined NDE methods to establish the optimum rehabilitation procedure to restore the capacity of the fire-damaged SFRC structural members. Full article

This study demonstrated the potential of a non-destructive evaluation (NDE) method to assess the elastic properties of materials printed under various parameters. A database was created documenting the relationship between the elastic properties (Young’s modulus, shear modulus, and Poisson’s ratio) of PLA (polylactic acid) materials and selected printing parameters such as temperature, speed, and layer height. PLA, which is widely used in additive manufacturing, offers convenient testing conditions due to its less demanding control compared to materials like metals. Ultrasonic testing was conducted on specimens printed under different nozzle temperatures, speeds, and layer heights. The results indicated that an increase in the printing temperature corresponded to an increase in material density and elastic properties of the material. In contrast, an increase in layer height led to a decrease in both density and the elastic properties of the material. Variations in the nozzle speed had a negligible effect on density and did not show a notable effect on the elastic moduli. This study demonstrated that ultrasonic testing is effective in measuring the elastic properties of PLA materials and shows the potential of real-time ultrasonic NDE. Full article

We develop decision support and automation for the task of ultrasonic non-destructive evaluation data analysis. First, we develop a probabilistic model for the task and then implement the model as a series of neural networks based on Conditional Score-Based Diffusion and Denoising Diffusion Probabilistic Model architectures. We use the neural networks to generate estimates for peak amplitude response time of flight and perform a series of tests probing their behavior, capacity, and characteristics in terms of the probabilistic model. We train the neural networks on a series of datasets constructed from ultrasonic non-destructive evaluation data acquired during an inspection at a nuclear power generation facility. We modulate the partition classifying nominal and anomalous data in the dataset and observe that the probabilistic model predicts trends in neural network model performance, thereby demonstrating a principled basis for explainability. We improve on previous related work as our methods are self-supervised and require no data annotation or pre-processing, and we train on a per-dataset basis, meaning we do not rely on out-of-distribution generalization. The capacity of the probabilistic model to predict trends in neural network performance, as well as the quality of the estimates sampled from the neural networks, support the development of a technical justification for usage of the method in safety-critical contexts such as nuclear applications. The method may provide a basis or template for extension into similar non-destructive evaluation tasks in other industrial contexts. Full article

This article presents a concept, materials, and methods to devise a Bond Quality Index (BQI) for assessing composite bond quality, approximately correlating to the respective bond strength. Interface bonding is the common mechanism to join two composite structural components. Ensuring the health and quality of the bond line between two load-bearing composite structures is crucial. The article presents the classification and data-driven distinction between two types of bond lines between similar structural components. The interface bonds in composite plates were prepared using polyester peel ply and TX-1040 nylon peel ply. For all the plates, ultrasonic inspection through scanning acoustic microscopy (SAM) (>10 MHz) was performed before and after localized failure of the plate by impinging energy. Energy was impinged 0–10 J/cm² of in the 16-ply plates, and 0–25 J/cm² were impinged in 40-ply plates. Followed by bond failure and SAM, a new parameter called the Bond Quality Index (BQI) was formulated using ultrasonic scan data and energy data. The BQI was found to be 0.55 and 0.45, respectively, in plates with polyester peel ply and TX-1040 nylon peel ply bonds. Further, in 40-ply plates with polyester peel ply resulted in a BQI equivalent to 3.49 compared to 0.75 in plates with a TX-1040 nylon peel ply bond. Currently, the BQI is not normalized; however, this study could be used for AI-driven normalized BQIs for all types of bonds in the future. Full article

Ultrasonic non-destructive evaluation, which has been used widely, can detect and size critical flaws in structures. Advances in sound field calculations can further improve its effectiveness. Two calculation methods were used to characterize the relevant sound fields of an ultrasonic transducer and the results were applied to construct and evaluate Distance-Gain-Size (DGS) diagrams, which are useful in flaw sizing. Two published DGS diagrams were found to be deficient because the backward diffraction path was overly simplified and the third one included an arbitrary procedure. Newly constructed DGS diagrams exhibited transducer size dependence, revealing another deficiency in the existing DGS diagrams. However, the extent of the present calculations must be expanded to provide a catalog of DGS diagrams to cover a wide range of practical needs. Details of the new construction method are presented, incorporating two-way diffraction procedures. Full article

Double-shell tanks (DSTs) are a critical part of the infrastructure for nuclear waste management at the U.S. Department of Energy’s Hanford site. They are expected to be used for the interim storage of partially liquid nuclear waste until 2050, which is the target date for completing the immobilization process for all Hanford nuclear waste. At that time, DSTs will have been used about 15 years beyond their original projected lifetime. Consequently, for the next approximately 30 years, Hanford DSTs will undergo periodic nondestructive evaluation (NDE) to ensure their integrity. One approach to perform NDE is to use ultrasonic data from a robot moving through air slots, originally designed for cooling, in the confined space between primary and secondary tanks. Interpreting ultrasonic sensor output requires knowing where measurements were taken with a precision of approximately one inch. Analyzing video acquired during inspection is one approach to tracking sensor location. The top edge of an air slot is easily detected due to the difference in color and texture between the primary tank bottom and the air slot walls. A line fit to this edge is used in a model to calculate the apparent width of the air slot in pixels at targets near the top edge that can be recognized in video images. The apparent width of the air slot at the chosen target in a later video frame determines how far the robot has moved between those frames. Algorithms have been developed that automate target selection and matching in later frames. Tests in a laboratory mockup demonstrated that the method tracks the location of the ultrasonic sensor with the required precision. Full article

The basic principle of ultrasound is to relate the time of flight of a received echo to the location of a reflector, assuming a known and constant velocity of sound. This assumption breaks down in austenitic welds, in which a microstructure with large oriented austenitic grains induces local velocity differences resulting in deviations of the ultrasonic beam. The inspection problem is further complicated by scattering at grain boundaries, which introduces structural noise and attenuation. Embedding material information into imaging algorithms usually improves image quality and aids interpretation. Imaging algorithms can take the weld structure into account if it is known. The usual way to obtain such information is by metallurgical analysis of slices of a representative mock-up fabricated using the same materials and welding procedures as in the actual component. A non-destructive alternative to predict the weld structure is based on the record of the welding procedure, using either phenomenological models or the finite element method. The latter requires detailed modelling of the welding process to capture the weld pool and the microstructure formation. Several parameters are at play, and uncertainties intrinsically affect the process owing to the limited information available. This paper reports a case study aiming to determine the most critical parameters and levels of complexity of the weld formation models from the perspective of ultrasonic imaging. By combining state-of-the-art welding simulation with time-domain finite element prediction of ultrasound in complex welds, we assess the impact of the modelling choices on the offset and spatial spreading of defect signatures. The novelty of this work is in linking welding simulation with ultrasonic imaging and quantifying the effect of the common assumptions in solidification modelling from the non-destructive examination perspective. Both aspects have not been explored in the literature to date since solidification modelling has not been used to support ultrasonic inspection extensively. The results suggest that capturing electrode tilt, welding power, and weld path correctly is less significant. Bead shape was identified as having the greatest influence on delay laws used to compute ultrasonic images. Most importantly, we show that neglecting mechanical deformation in FE, allowing for simpler thermal simulation supplemented with a phenomenological grain growth loop, does not reduce the quality of the images considerably. Our results offer a pragmatic balance between the complexity of the model and the quality of ultrasonic images and suggest a perspective on how weld formation modelling may serve inspections and guide pragmatic implementation. Full article

The inspection of nuclear power plants is an essential process that occurs during plant outages. During this process, various systems are inspected, including the reactor’s fuel channels to ensure that they are safe and reliable for the plant’s operation. The inspection of Canada Deuterium Uranium (CANDU^®) reactor pressure tubes, which are the core component of the fuel channels and house the reactor fuel bundles, is performed using Ultrasonic Testing (UT). Based on the current process that is followed by Canadian nuclear operators, the UT scans are manually examined by analysts to locate, measure, and characterize pressure tube flaws. This paper proposes solutions for the auto-detection and sizing of pressure tube flaws using two deterministic algorithms, the first uses segmented linear regression, while the second uses the average time of flight (ToF) within ±σ of µ. When compared against a manual analysis stream, the linear regression algorithm and the average ToF achieved an average depth difference of 0.0180 mm and 0.0206 mm, respectively. These results are very close to the depth difference of 0.0156 mm when comparing two manual streams. Therefore, the proposed algorithms can be adopted in production, which can lead to significant cost savings in terms of time and labor. Full article

Since 1987 when dry-point-contact (DPC) transducers were invented in the USSR, ultrasonic shear wave devices based on those transducers have been commercialized and have become one of the most effective technologies for imaging concrete. That said, the objectives of this paper are (1) to provide a brief review of the historical development of these powerful devices and (2) to provide a comprehensive assessment of their capabilities in imaging internal entities and structural defects. Regarding the former, the paper presents the context that gave birth to DPC technology and different generations of ultrasonic shear wave devices for concrete inspection. For the latter, one of the state-of-the-art ultrasonic shear wave devices (MIRA 3D) was used to collect data on concrete specimens with different built-in flaws/defects. Those data are then visualized with a commonly used data processing algorithm, the so-called synthetic aperture focusing technique (SAFT). Finally, based on the resulting images, the capabilities of the device are discussed in detail for each concrete imaging problem. A main limitation of ultrasonic shear wave technique for concrete inspection is that it requires a significant amount of time and effort for data collection. Full article

Ultrasonic testing (UT) is one of the most popular non-destructive evaluation (NDE) techniques used in many industries to evaluate structural integrity. The commonly used NDE techniques are basic inspection techniques, such as visual testing (VT), penetration testing (PT), and magnetic testing (MT), and advanced inspection techniques, such as UT, radiography testing (RT), eddy current testing (ECT), and phased array ultrasonic testing (PAUT). Among the numerous advanced techniques, ultrasonic testing (UT) is usually used for the inspection of welds in various industries. However, the application of UT still has some shortcomings to overcome. One major shortcoming that reduces the precision of UT is the extra signals from the geometrical interface of a specimen. UT uses the reflection indications of the ultrasonic beam. However, the reflection signals from the welding interface and geometry along with the target flaw signal produce mixed signals. The inspectors use a 1-D reflection outcome called the ultrasonic A-scan to evaluate the welding integrity. The mixed ultrasonic A-scan signals are often very difficult to analyze because inspectors must distinguish the target flaw signal of welding from the mixed ultrasonic A-scan signal, which includes the flaw indication as well as the background signal. Therefore, a method to distinguish between the flaw signal and the background signal must be developed for the efficiency of UT. Autoencoder is an artificial neural network that is made for feature extraction from the input. Denoising autoencoder (DAE) is one of the derivative models of the autoencoder which adds or eliminates random noise signals to extract the prominent features. DAE is already widely used in the denoising of images and sound data. The characteristics of DAE are used in this research to distinguish the ultrasonic flaw signal from the mixed ultrasonic A-scan signal. For the training, 2463 mixed A-scan signals were obtained from 45 different standard blocks in which 5 different types of flaws were embedded. For testing, we used 1000 mixed A-scan signals. The performance of the network was evaluated using a point-by-point comparison method. The autoencoder was trained to denoise the background signal from the mixed ultrasonic A-scan, and the target flaw signal was extracted from the original A-scan signal. Full article

High-density polyethylene (HDPE) is widely used for above-ground storage tanks (ASTs). However, there are currently no guidelines for the non-destructive testing (NDT) and evaluation (NDE) of HDPE ASTs. Moreover, the feasibility, limitations, and challenges of using NDT techniques for the field inspection of HDPE ASTs have not been well established. This study used both infrared thermography (IRT) and ultrasonic testing (UT) for the field inspection of HDPE ASTs. Highlighting the implementation challenges in the field, this study determined that: (1) ambient environmental parameters can affect IRT accuracy; (2) there is an ideal time during the day to perform IRT; (3) the heating source and infrared camera orientation can affect IRT accuracy; and (4) with proper measures taken, IRT is a promising method for flaw detection in HDPE ASTs. Additionally, UT can be used following IRT for detailed investigation to quantify the size and depth of defects. The manuscript concludes with a discussion of the limitations and best practices for the implementing of IRT and UT for HDPE AST inspections in the field. Full article

The aim of this work is to achieve reliable nondestructive evaluation (NDE) of adhesively bonded aerospace components by developing novel multidimensional data fusion techniques, which would combine the information obtained by ultrasonic and X-ray NDE methods. Separately, both NDE techniques have their advantages and limitations. The integration of data obtained from pulse echo immersion ultrasound testing and radiography holds immense potential to help improve the reliability of non-destructive evaluation. In this study, distinctive features obtained from single techniques, traditional ultrasonic pulse echo testing, and radiography, as well as fused images, were investigated and the suitability of these distinctive features and fusion techniques for improving the probability of defect detection was evaluated. For this purpose, aluminum single lap joints with brass inclusions were analyzed using ultrasound pulse echo and radiography techniques. The distinctive features were extracted from the data obtained, and images of features obtained by both techniques were fused together. Different combinations of features and fusion algorithms were investigated, considering the desire to automate data evaluation in the future. Full article