Search Results (32)

Background/Objectives: This cross-sectional analytical study investigated the relationship between the craniofacial morphology, condylar displacement, and degenerative changes in the temporomandibular joints (TMJs) in adult patients with class II skeletal malocclusion. To compare cephalometric variables, joint space dimensions, and centric slide measurements between patients with and without CBCT-confirmed TMJ degenerative alterations. Methods: Sixty adults with class II malocclusion were divided into two equal groups (n = 30) based on the presence or absence of TMJ degenerative changes on CBCT. Joint spaces were measured, condylar displacement was evaluated using a condylar position indicator (CPI), and cephalometric analysis was performed in both maximal intercuspation and centric relation. Statistical comparisons were performed using t-tests, chi-squared tests, and Pearson’s correlation analysis. Significance was set at p < 0.05. Results: Patients with degenerative TMJ changes exhibited significantly greater overjet (p = 0.0001) and a trend toward increased ANB angles (p = 0.055). The superior joint space was reduced on the right side (p = 0.031). Condylar displacements ≥ 2 mm were more frequent in the affected group and correlated with sagittal cephalometric discrepancies (45% vs. 24% in controls). Conclusions: Aggravated skeletal class II malocclusion with increased overjet could be associated with TMJ degenerative changes. CR-based cephalometry and CBCT evaluation may aid in diagnostic assessment, but longitudinal studies are needed to confirm the clinical relevance. Full article

Background: Managing unilateral maxillary lateral incisor agenesis (UMLIA) with an associated microdontic or peg-shaped contralateral incisor (Mi or Peg MLI) presents clinical and esthetic challenges. Deciding between orthodontic space opening (OSO) or closure (OSC) and whether to restore or extract the Mi or Peg MLI are critical factors for achieving optimal treatment outcomes. Methods: A systematic review was conducted using a dual strategy across Scopus, Web of Science, Embase, PubMed, and Cochrane Central Register of Controlled Trials databases. The Cochrane RoB2 tool was used for randomized controlled trials (RCTs), the ACROBAT-NRSI tool for non-randomized studies, and the JBI Manual for case reports. High-quality case reports were included when the literature was limited. The GRADE (Grading of Recommendations, Assessment, Development, and Evaluation) tool evaluated the certainty of evidence, considering bias, inconsistency, indirectness, imprecision and other considerations. Results: Thirty-five studies met the inclusion criteria, assessing treatment modalities, esthetic outcomes, periodontal health, and occlusal and temporomandibular joint (TMJ) function. Both OSO and OSC demonstrated similar occlusal and TMJ outcomes, while slight differences in esthetic and periodontal results were noted between the two approaches. Direct composite and indirect ceramic restorations showed comparable effectiveness for reshaping the Mi or Peg MLI. Extraction combined with OSC contributed to improved smile symmetry. Conclusions: A personalized, multidisciplinary approach is essential for treating UMLIA with an Mi or Peg MLI. Both OSO and OSC are viable options, and the choice should be tailored to the patient’s specific clinical scenario, with attention to achieving the best esthetic and periodontal outcomes. Further research is needed to refine treatment protocols and support clinical decision-making. Full article

Background: Temporomandibular joint (TMJ) disorders are a significant cause of orofacial pain. Artificial intelligence (AI) has been successfully applied to other imaging modalities but remains underexplored in ultrasonographic evaluations of TMJ. Objective: This study aimed to develop and validate an AI-driven method for the automatic and reproducible measurement of TMJ space width from ultrasonographic images. Methods: A total of 142 TMJ ultrasonographic images were segmented into three anatomical components: the mandibular condyle, joint space, and glenoid fossa. State-of-the-art architectures were tested, and the best-performing 2D Residual U-Net was trained and validated against expert annotations. The algorithm for joint space width measurement based on TMJ segmentation was proposed, calculating the vertical distance between the superior-most point of the mandibular condyle and its corresponding point on the glenoid fossa. Results: The segmentation model achieved high performance for the mandibular condyle (Dice: 0.91 ± 0.08) and joint space (Dice: 0.86 ± 0.09), with notably lower performance for the glenoid fossa (Dice: 0.60 ± 0.24), highlighting variability due to its complex geometry. The TMJ space width measurement algorithm demonstrated minimal bias, with a mean difference of 0.08 mm and a mean absolute error of 0.18 mm compared to reference measurements. Conclusions: The model exhibited potential as a reliable tool for clinical use, demonstrating accuracy in TMJ ultrasonographic analysis. This study underscores the ability of AI-driven segmentation and measurement algorithms to bridge existing gaps in ultrasonographic imaging and lays the foundation for broader clinical applications. Full article

This study assessed the condyle–fossa relationships in adults with different skeletal patterns using cone-beam computed tomography (CBCT). A total of 135 adult participants were included in the analysis of the CBCT images. Participants were categorized based on gender, age, race, and skeletal patterns. The measurements of the temporomandibular joint spaces were taken, which include the anterior (AS), superior (SS), posterior (PS), medial (MS), central (CS), and lateral (LS) spaces. Additionally, the dimensions of the condyle were assessed, including mediolateral thickness (MLT), anteroposterior thickness (APT), articular slope (ArS), and the vertical height of the fossa (VHF). These measurements were then compared. The average ratios of AS:SS:PS and MS:CS:LS were 1.00:1.61:1.18 and 1.00:1.15:0.79, respectively. The average values of most measurements were significantly higher in males than in females. The average value of APT was significantly higher in the late age group than in others, but there was no statistical difference according to race. The average values of PS, CS, and LS were significantly higher on the left side than on the right, while the average value of AS was significantly higher on the right side than on the left. The average values of SS, CS, and MLT were significantly higher in hypodivergent than in hyperdivergent skeletal patterns, while the average values did not show any statistical differences based on horizontal skeletal patterns. The average values of SS and CS in the Class II horizontal skeletal group were significantly lower in hyperdivergent individuals compared to other vertical skeletal patterns. In adults, statistical differences in condyle–fossa relationships were observed based on gender, age, sides, and skeletal patterns, but no differences were identified according to race. Full article

Background: The accurate diagnosis of degenerative joint diseases (DJDs) of the temporomandibular joint (TMJ) presents a significant clinical challenge due to their progressive nature and the complexity of associated structural changes. These conditions, characterized by cartilage degradation, subchondral bone remodeling, and eventual joint dysfunction, necessitate reliable and efficient imaging techniques for early detection and effective management. Cone-beam computed tomography (CBCT) is widely regarded as the gold standard for evaluating osseous changes in the TMJ, offering detailed visualization of bony structures. However, ultrasonography (US) has emerged as a promising alternative, offering a non-invasive and radiation-free option for assessing TMJ disorders. This study aims to evaluate the diagnostic accuracy of US in identifying degenerative changes in the TMJ, with CBCT serving as the definitive diagnostic reference. By analyzing the sensitivity, specificity, and predictive values of US in detecting key degenerative markers—such as subchondral erosion, osteophytes, and joint space narrowing—this investigation seeks to assess its utility as a screening tool and its potential integration into clinical workflows. Methods: Forty adult patients presenting temporomandibular joint disorders were included in our cross-sectional study. Each patient underwent a clinical examination and was subjected to cone-beam computed tomography (CBCT) and ultrasonography (US). A statistical analysis was performed to compare the imaging results from CBCT and US. Results: The results are summarized in three tables. The first table presents a comparative analysis of radiological outcomes in patients with temporomandibular joint disorders using different imaging techniques. CBCT demonstrated higher sensitivity in detecting osteophytes in the right mandibular head (27.50% vs. 7.50%, p = 0.027) and higher detection rates for erosions, though without a significant advantage over US. The second table analyzes the consistency of diagnostic results between CBCT and US. A moderate agreement was observed for detecting normal bone structures, with AC1 values of 0.58 for the right and 0.68 for the left mandibular head (p < 0.001). The third table evaluates the diagnostic accuracy of US compared to CBCT. US demonstrated a positive predictive value (PPV) of 90% for detecting normal conditions, indicating its high reliability as a screening tool for normal findings. US demonstrates higher effectiveness in ruling out certain issues due to its high specificity and negative predictive value. However, its lower sensitivity in detecting abnormalities may lead to both false-positive and false-negative results. Conclusions: US holds significant promise as a screening modality for detecting normal anatomical features of the temporomandibular joint, its limitations in identifying more complex degenerative changes necessitate a cautious and integrated approach to TMJ diagnostics. Full article

Background and Objectives: The most popular surgical procedures among orthognathic surgeries for Class II and III patients are Le Fort 1 osteotomy for the maxilla and bilateral sagittal split ramus osteotomy (BSSRO) for the mandible. Keeping the condyle in its proper place during fixation is one of the difficulties of orthognathic surgery. One of the worst post-orthognathic surgery consequences in the temporomandibular joint (TMJ) area may be condylar resorption. Condylar remodeling refers to a group of processes that occur in reaction to forces and stress placed on the temporomandibular joint in order to preserve morphological, functional, and occlusal balance. A systematic review of the literature was performed with the aim of identifying the mandibular condylar component of TMJ changes after orthognathic surgery in class II and III patients. Materials and Methods: An electronic search was carried out using the PubMed, Cochrane Library, and Google Scholar, databases. The inclusion criteria included trials in non-growing patients upon whom orthognathic surgery was performed due to Angle II or Angle III classes malocclusion; in addition, a CT or cone beam computed tomography (CBCT) scan was performed before and after surgery to track the mandibular condylar component of TMJ changes. The quality of the studies was evaluated by two independent authors. The risk of bias was assessed by using the Downs and Black checklist. Results: The electronic and manual literature search yielded 12 studies that fulfilled all necessary inclusion criteria. Observed studies were evaluated as good (3), fair (8), and poor (1) quality. Two studies evaluated class II patients, six studies observed class III patients, and four studies were comparative. Most of the studies evaluated condyle angle and space changes, and the condylar surface and volume changes were also observed. However, the methodology of evaluation in the publications differs. Conclusions: Reduction of bone density, especially in class II patients, and morphological condyle reshaping, with the apposition of the bone, is the main adaptive mechanism after orthognathic surgery. However, all of the studies we examined were conducted using different methods of evaluation, measurement, and reference points. Full article

Background/Objectives: The relation between the orthopedic temporomandibular joint (TMJ) instability and temporomandibular disorder (TMD) most commonly remain unrecognized by orthodontists. In this study we aimed to evaluate the dentofacial characteristics and temporomandibular disorder symptomatology of patients with orthopedic instability before and after deprogramming with a stabilization splint. Methods: Sixty patients with the signs and symptoms of TMD were assessed using the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) and underwent stabilization splint therapy to place the condyles in a more stable musculoskeletal position. The extent of condylar displacement was evaluated using the condylar position indicator (CPI). Sixteen angular and linear hard tissue landmarks were traced and compared from lateral cephalograms taken in the maximum intercuspation (MI) position before, and in the centric relation (CR) position after, the splint therapy. Results: Following the splint therapy, the signs and symptoms of TMD were significantly reduced or completely eliminated in more than 90% of patients. Compared with the values registered before the splint therapy, a significant reduction in the mean values of condylar displacement was observed on both sides of the vertical (p < 0.001), horizontal (p < 0.05), and transverse (p < 0.001) planes of space after the splint therapy. A comparison of pre- and post-splint lateral cephalograms revealed that, following the splint therapy, the mandible moved more posteriorly and rotated in a more clockwise direction. Conclusions: In patients with orthopedic instability and the signs and symptoms of TMD, muscle deprogramming with a stabilization splint therapy is highly recommended to improve the health of the temporomandibular joint and masticatory structures and contribute to a more correct orthodontic diagnosis. Full article

Background: Temporomandibular disorders are common conditions characterized by discomfort within the temporomandibular joints, acoustic changes, and restricted mandibular movement. Accurate diagnosis and subsequent treatment rely heavily on clinical examination, but it is often necessary to add radiological examinations to the diagnostics. Magnetic Resonance Imaging (MRI) is the gold standard for visualizing the disc, while cone-beam computed tomography (CBCT) is primarily used for evaluating condylar morphology. Ultrasound (US) serves as a real-time imaging modality for soft tissues. The objective of the present study was to explore the association between clinical manifestations observed in patients with temporomandibular joint disorders and corresponding radiographic findings. Methods: A total of 63 adult patients (51 female and 12 male) with temporomandibular joint disorders were included in this cross-sectional study. Each patient underwent a clinical examination, followed by appropriate radiological examinations (MRI, CBCT, or US). The level of statistical significance was set at an alpha of 0.05. The Shapiro–Wilk test assessed the normality of numerical variables. The Wilcoxon rank sum test compared two independent groups with non-normally distributed data. Relationships between categorical variables were evaluated using the Pearson chi-square test or Fisher’s exact test. The Kendall tau (τ) method analyzed the correlation between two binary variables. Results: The analysis included 63 patients with TMD, predominantly females (80.95%). Ages ranged from 18 to 74 years with a median of 39 years. In the CBCT study, we observed rarefied changes in the left bone structures in patients with bruxism (p = 0.010). MRI and ultrasound imaging revealed changes in patients with limited jaw opening: erosions in the right mandibular head on ultrasound (p = 0.008) and abnormal right bone structures on MRI (p = 0.009). In CBCT, asymmetry in the left joint space was correlated with a high incidence of right side muscle tension (p = 0.004). Additionally, both CBCT and ultrasound showed a correlation between muscle tension and erosion (p = 0.040 in ultrasound, p = 0.020 in CBCT). Acoustic changes, when compared with radiological imaging, were evident in all three studies, like temporomandibular joint pain or palpation. Conclusions: Our study compared three radiographic imaging methods with clinical examinations to assess their correlation with clinical symptoms. Each imaging technique provided unique insights depending on the specific symptoms presented. The observed correlations varied, highlighting the unique contributions of each modality to the diagnostic process. This underscores the importance of employing multiple diagnostic approaches for a thorough assessment of the temporomandibular joint. However, a limitation of our study is the small sample size and the uneven distribution of participants among the groups. Additionally, not all patients underwent every imaging modality. Full article

Background: Morphological differences in the temporomandibular joint (TMJ) are crucial for the treatment of patients with cleft lip and palate (CLP). This study aims to evaluate and compare the TMJ parameters in patients with unilateral and bilateral CLP across growing and non-growing age groups using cone-beam computed tomography (CBCT). Methods: CBCT records from 57 patients (23 males and 34 females) aged 6–50 years with a diagnosed unilateral or bilateral CLP were analyzed. Patients were categorized into four groups: growing unilateral (UGCLP), growing bilateral (BGCLP), non-growing unilateral (UNGCLP), and non-growing bilateral (BNGCLP). Measurements of TMJ parameters, including the mandibular fossa, articular eminence inclination, joint spaces, and roof thickness of the glenoid fossa, were conducted using CBCT images. Results: Significant differences were observed in the anterior joint space (AJS) and the roof of the glenoid fossa (RGF) between growing and non-growing unilateral cleft patients. Additionally, significant discrepancies were found in the articular eminence angle when comparing the cleft and non-cleft sides within the unilateral growing group. No significant differences were observed in TMJ parameters between the right and left sides among bilateral cleft patients. Conclusions: The study highlights distinct TMJ morphological differences between growing and non-growing patients with CLP, emphasizing the importance of age-specific considerations in the treatment planning and growth monitoring of these patients. Full article

This study aimed to compare the pre- and post-operative temporomandibular joint (TMJ) condylar position in dentofacial deformity (DFD) patients who had orthognathic surgeries using cone beam computed tomography (CBCT). A retrospective study evaluating the pre- and post-operative CBCT for 79 DFD patients (equivalent to 158 TMJs) (mean age = 26.62 ± 9.5 years) with a bilateral sagittal split osteotomy with or without Le Fort I surgeries (n = 29 Class II DFD, n = 50 Class III DFD) was performed. This included the compartmental measurement of TMJ spaces, in addition to the measurement of intercondylar distances and angles. Condylar position centricity was assessed using the Pullinger and Hollender formula. Clinical data were analysed for DFD class, the type of surgery and post-operative CBCT timing. Pre- and post-operative measurements were compared statistically using a paired t-test, Wilcoxon signed-rank test, and Stuart–Maxwell test. TMJ condyles tended to relocate post-operatively in a posterosuperior position with internal rotation in Class II DFD and a superior position with internal rotation in Class III DFD. However, the overall changes were within <0.5 mm translation and <4° rotation and the number of concentrically positioned condyles (according to the Pullinger and Hollender formula) did not change significantly. Orthognathic surgery is associated with minor post-operative translational and rotational condylar positional changes in Class II and III DFDs. Full article

This study aims to determine if a large anterior and reduced posterior/superior joint space is highly predictable for disc displacement. From patients with temporomandibular disorders symptoms, fifty-two experimental joints and fourteen control joints were included. The cone beam computed tomography (CBCT) images were used to calculate posterior-to-anterior (P-A) and superior-to-anterior (S-A) joint space ratios, while disc position was determined using magnetic resonance imaging (MRI). One-way analysis of covariance test and receiver operating characteristics analysis were carried out. The results showed that among the 52 experimental joints, 45 were diagnosed as disc displacement and 7 as normal disc positions (N). All 14 control joints showed normal disc positions. The P-A ratio was 1.46 ± 0.21, 0.99 ± 0.23, and 0.86 ± 0.30 in the control, N, and DD groups, respectively (p < 0.001). The S-A ratio was 1.80 ± 0.27, 1.44 ± 0.33, and 1.08 ± 0.35 in the control, N, and DD groups, respectively (p < 0.001). When an altered P-A ratio and/or S-A ratio are observed on the CBCT, the diagnosis of disc displacement is quite predictable with high sensitivity and specificity. Full article

Introduction: Due to the silent manifestation of temporomandibular joint (TMJ), dentists and rheumatologists may neglect treatment for this joint. Aims: The aim of this study was to investigate the TMJ components in patients with various rheumatic diseases and to compare them with a control group based on cone beam computed tomography (CBCT) images. Materials and Methods: This study comprised an assessment of the CBCT images of 65 patients (130 temporomandibular joints) with various rheumatic diseases (mostly rheumatoid arthritis) affecting the TMJ. Moreover, 65 patients (130 temporomandibular joints) with a similar age and gender distribution were examined as the control group. Pathologies were classified into a total of 12 types for the presence of any osseous changes in the condylar head or articular fossa or for joint space narrowing. Statistical analysis of all data was performed with SPSS version 18. The conformity of continuous variables to a normal distribution was examined by the Kolmogorov–Smirnov test. The Mann–Whitney U test was used to compare the means of two independent groups. The Pearson Chi-square test, Yates correction and Fisher’s exact test were used in the analysis of categorical variables. Results: The mean age of the patient and control groups was 50 ± 13 and 48 ± 16, respectively, and no statistically significant difference was found between the patient and control groups in terms of age distribution (p = 0.123). Condylar erosion, condylar flattening, subcondylar sclerosis, osteophytes, subcortical cysts, articular eminence resorption and articular eminence flattening rates were found to be statistically significantly higher in the patient group than in the control group (p < 0.05). Conclusions: Dentomaxillofacial radiologists should examine the bony components of the TMJ in patients with rheumatic diseases, and a multidisciplinary approach involving a dental specialist and rheumatologist is required. Full article

Based on computed tomography (CT) images, volume rendering was used to obtain a three-dimensional representation of data (3DVR). The aims of this study included: describing the bone anatomy of the temporomandibular joint (TMJ) of dogs; comparing the TMJs of each dog by skull type and age; comparing 3DVR images with three-standard-plane CTs; assessing soft tissues adjacent to the TMJ and assessing pathological cases. Multidetector computed tomography scans of bilateral TMJs of 410 dogs were observed. From a ventral view, slight displacements in the positions of the skulls were seen, whereas from a caudal view, differences in amplitude of the articular space were observed. Dolichocephalic and mesaticephalic dogs showed more similar TMJ features than brachycephalic dogs. The shape of the TMJ bones were irregular in dogs under 1 year old. The 3DVR images related to the three-standard-plane CT improved the overall comprehension of the changes in the articular space amplitude and condylar process morphology. The fovea pterygoidea, mandibular fossa and retroarticular process were perfectly shown. A better spatial situation of adjacent soft tissues was obtained. The 3DVR represents an ancillary method to the standard-plane CT that could help in the understanding of the anatomy and diagnoses of different pathologies of the TMJ in dogs. Full article

The temporomandibular joint (TMJ) is a critical joint for the opening and closing of the mouth. The generation of customised TMJs according to individuals’ dental anatomy is needed. Currently, the implants available on the market lack consideration of the patient’s dental anatomy. This leads to the creation of an imbalance in the reaction forces on both ends of the TMJ. This requires a slight structural change in the design parameters to give a solution. The purpose of this study is to propose a new design that includes the geometry and materials for a TMJ implant. Stress analysis was carried out on the TMJ to balance the reaction forces at both TMJ ends. A static analysis was performed using ANSYS Workbench, to compare the results of two customised designs of TMJ implants, in order to better balance the reaction forces at both ends. The model in the study showed that the reaction forces for both the patient-specific TMJ implants were nearly balanced. The reaction forces were better balanced, and almost equivalent to the intact conditions. The stresses in the mandible were more uniformly distributed in the customised design of the TMJ implant. The two types of design showed that the custom design took up less space in the patient’s region of surgery, making it a better option compared to a stock TMJ implant. The custom implant would allow faster patient rehabilitation, as the reaction forces would be close to those in intact conditions. Full article

The purpose of this retrospective study was to evaluate changes in the temporomandibular joint spaces (TMJSs) in skeletal Class III adult patients with orthognathic surgery using cone-beam computed tomography (CBCT). CBCT images taken from 26 orthognathic surgery adult patients (15 females, 11 males, average 19.6 ± 2.8 years at pretreatment, range 15.8–26.8 years) with skeletal Class III malocclusion (ANB < 1°) were used for this study. TMJSs (AS, anterior space; SS, superior space; PS, posterior space; MS, medial space; CS, central space; LS, lateral space) were measured at each stage of treatment (T0, pretreatment; T1, presurgery; T2, postsurgery; T3, posttreatment, and T4, retention) and were compared according to gender, side, vertical skeletal pattern, number of surgery sites, and amount of mandibular setback. At T0, TMJSs were significantly greater in SS than in AS and PS. The ratio of AS to SS to PS was 1.0 to 1.5 to 1.1. TMJSs were significantly greater in MS and CS than in LS. The ratio of MS to CS to LS was 1.0 to 1.0 to 0.8. All TMJSs in males were significantly greater than in females except in PS. TMJSs on the left side were significantly greater than on the right side only in PS. TMJSs were not significantly different depending on the SN-MP, number of surgery sites, and amount of setback. From T0 to T4, there were no significant changes in TMJSs or their ratios according to gender, side, sella to nasion (SN), mandibular plane (MP), number of surgery sites, and amount of setback. Exceptionally, at T4, SS and CS were significantly greater in the small amount of setback group than in the large amount of setback group. There were no statistical changes in TMJSs throughout all stages when skeletal Class III patients were treated with surgery. Full article