Search Results (36)

Pathologies of the heart (e.g., ischemic disease, valve fibrosis and calcification, progressive myocardial fibrosis, heart failure, and arrhythmogenic disorders) stem from the irreversible deterioration of cardiac tissues, leading to severe clinical consequences. The limited regenerative capacity of the adult myocardium and the architectural complexity of the heart present major challenges for tissue engineering. However, recent advances in biomaterials and biofabrication techniques have opened new avenues for recreating functional cardiac tissues. Particularly relevant in this context is the integration of biomimetic design principles, such as structural anisotropy, mechanical and electrical responsiveness, and tissue-specific composition, into 3D bioprinting platforms. This review aims to provide a comprehensive overview of current approaches in cardiac bioprinting, with a focus on how structural and functional biomimicry can be achieved using advanced hydrogels, bioprinting techniques, and post-fabrication stimulation. By critically evaluating materials, methods, and applications such as patches, vasculature, valves, and chamber models, we define the state of the art and highlight opportunities for developing next-generation bioengineered cardiac constructs. Full article

Objectives: Our goal was to assess the role of leaflet geometry on the structural deterioration of bioprosthetic aortic valves (BAVs) in a closed configuration. Methods: With a Fung-type orthotropic model, finite element modeling was used to create ten cases with parabolic, circular and spline leaflet curvatures and six leaflet angles. Results: A circular circumferential curvature led to lower von Mises and compressive stresses in both the coaptation and load-bearing areas, reduced tensile stresses in the coaptation regions, and increased tensile stresses in the load-bearing areas. A parabolic radial curvature reduced von Mises stresses in the coaptation, as well as the load-bearing regions, reduced compressive stresses in the coaptation, and reduced tensile stresses in the load-bearing regions, leading to a slight increase in the minimized tensile stress in the coaptation regions (1.794 vs. 1.765 MPa) and the minimized compressive stress in the load-bearing regions (0.772 vs. 0.768 MPa). Within a range of downward inclination of the leaflets, all stresses in the coaptation regions decreased. A parabolic circumferential curvature, a linear radial curvature, and, for most cases, upward leaflet inclinations were associated with larger contact pressures between the leaflets. Conclusions: A parabolic radial curvature and downward leaflet inclination likely lead to the longer durability of BAVs. Full article

Free stroke, which means the intermittent no-load operation state of dampers, can cause an abnormal noise and unavoidably lead to the deterioration of vehicle NVH performance. In electric vehicles, the noise is particularly intolerable because there are no engine sounds to mask it. Focusing on this, the mechanism of the free-stroke phenomenon is analyzed. A method, which involves parametric models and numerical simulation, is proposed to prevent free-stroke phenomena during the damper design phase. This paper proposes a free-stroke mechanism based on a fluid–structure interaction (FSI) numerical method, combined with experiments, which intends to provide a design reference with guaranteed performance for dampers. Initially, according to parametric cavitation models and by applying numerical methods, simulations for the proposed FSI model are calculated. By analyzing the simulation results, strain variation characteristics near the bottom of the damper valves are revealed, which establish the relationships between strain change, cavitation and the free-stroke phenomena. Meanwhile, the specific position and distribution of free-stroke failure are clearly located by running diverse loading speeds. Finally, all the theoretical analysis results are verified using damper noise tests and indicator bench tests. Full article

Background: Aortic valve stenosis remains the most prevalent valvular pathology in Western countries. Rapid deployment bioprosthesis (RD) has emerged as a promising alternative to conventional valves for surgical aortic valve replacement (SAVR), particularly in elderly and high-risk patients. This study reports the short- and long-term outcomes of RD in patients with isolated aortic stenosis. Methods: A retrospective single-center analysis was conducted on 382 patients who underwent RD-AVR between 2014 and 2020. Data were collected from clinical files and national electronic databases. Primary outcomes included cardiopulmonary bypass (CPB) and cross-clamping (XC) times, postoperative complications, and long-term survival. Results: The mean age was 75.6 ± 5.9 years, with 29.8% of patients over 80 years old and a mean EuroSCORE II of 2.3 ± 1.5%. CPB and XC times were 36.7 ± 10.8 and 27.4 ± 8.1 min, respectively. Postoperative complications included acute kidney injury (AKI, 53.4%), de novo atrial fibrillation (31.9%), and high-grade/complete atrioventricular block with permanent pacemaker implantation (9.8%). In-hospital and 30-day mortality was 1.02% and 2.3%, respectively. The 5-year survival rate was 77%. At 6 months postoperatively, the mean transvalvular gradient was 11.1 ± 4.7 mmHg. At a median follow-up of 6.7 years, no cases of structural valve deterioration and only one case of endocarditis were reported. Conclusion: In this single-center study, RD in isolated AVR demonstrated favorable short- and long-term outcomes, including no structural valve deterioration at mid-term follow-up. These devices offer a safe and effective alternative to conventional SAVR, particularly in high-risk populations. Full article

The diaphragm is the primary muscle involved in the ventilatory pump, making it a vital component in mechanical ventilation. Various factors in patients who require mechanical ventilation can lead to the deterioration of the diaphragm, which is associated with increased mortality. This deterioration can arise from either excessive or insufficient support due to improper adjustment of ventilation programming variables. It is essential for healthcare professionals to make appropriate adjustments to these variables to prevent myotrauma, which negatively impacts muscle structure and function. One recognized cause of muscle injury is eccentric work of the diaphragm, which occurs when muscle contractions continue after the expiratory valve has opened. Current evidence suggests that these eccentric contractions during mechanical ventilation can be harmful. This brief review highlights and analyzes the existing evidence and offers our clinical perspective on the importance of properly adjusting ventilation programming variables, as well as the potential negative effects of eccentric diaphragm contractions in routine clinical practice. Full article

Background: Aortic valve calcification results from degenerative processes associated with several pathologies. These processes are influenced by age, chronic inflammation, and high concentrations of phosphate ions in the plasma, which contribute to induce mineralization in the aortic valve and deterioration of cardiovascular health. Environmental factors, such as wood smoke that emits harmful and carcinogenic pollutants, carbon monoxide (CO), and nitrogen oxide (NO_x), as well as other reactive compounds may also be implicated. The purpose of this research was to study the impact of wood smoke on specific aortic valve characteristics, including lesion size and percentage of mineralization, in patients with aortic valve stenosis (AS). Methods: This observational study included 65 patients who underwent primary valve replacement surgery at the National Institute of Cardiology, 11 of whom were exposed to wood smoke. For each patient, approximately 0.5 cm of aortic valve tissue was collected along with a blood sample anticoagulated with sodium citrate. The valves were analyzed using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDS). Since extracellular microvesicles (MVs) may induce epigenetic changes in target cells by transferring their cargo, we also analyzed their mineral content. Results: Individuals exposed to wood smoke exhibit more extensive lesion (835 µm²) characteristics compared to those with no exposure (407.5 µm²). Interestingly, FESEM images of MVs showed the presence of minerals on their surface, thus providing evidence on their possible role in the pathophysiology of mineralization. Conclusions: Our study uniquely demonstrates imaging-based evidence of structural damage and mineralization in aortic valve tissue, with chronic wood smoke exposure emerging as a significant causative factor. Full article

Bioprosthetic aortic valve degeneration (BAVD) is a significant clinical concern following both transcatheter aortic valve replacement (TAVR) and surgical aortic valve replacement (SAVR). The increasing use of bioprosthetic valves in aortic valve replacement in younger patients and the subsequent rise in cases of BAVD are acknowledged in this review which aims to provide a comprehensive overview of the incidence, diagnosis, predictors, and management of BAVD. Based on a thorough review of the existing literature, this article provides an updated overview of the biological mechanisms underlying valve degeneration, including calcification, structural deterioration, and inflammatory processes and addresses the various risk factors contributing to BAVD, such as patient demographics, comorbidities, and procedural variables. The difficulties in early detection and accurate diagnosis of BAVD are discussed with an emphasis on the need for improved imaging techniques. The incidence and progression of BAVD in patients undergoing TAVR versus SAVR are compared, providing insights into the differences and similarities between the two procedures and procedural impacts on valve longevity. The current strategies for managing BAVD, including re-intervention options of redo surgery and valve-in-valve TAVR, along with emerging treatments are discussed. The controversies in the existing literature are highlighted to offer directions for future investigations to enhance the understanding and management of BAVD. Full article

Polymer heart valves are a promising alternative to bioprostheses, the use of which is limited by the risks of calcific deterioration of devitalized preserved animal tissues. This is especially relevant in connection with the increasingly widespread use of transcatheter valves. Advances in modern organic chemistry provide a wide range of polymers that can replace biological material in the production of valve prostheses. In this work, the main properties of REPEREN^® polymer film, synthesized from methacrylic oligomers reinforced with ultra-thin (50 µm) polyamide fibers, are studied. The film structure was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The hydrophilicity and cytocompatibility with EA.hy926 endothelial cells were assessed, and a hemocompatibility evaluation was carried out by studying the platelet aggregation and adhesion upon contact of the REPEREN^® with blood. The mechanical behavior and biocompatibility (subcutaneous implantation in rats for up to 90 days, followed by a histological examination) were studied in comparison with a bovine pericardium (BP) cross-linked with an ethylene glycol diglycidyl ether (DE). The results showed that REPEREN^® films have two surfaces with a different relief, smooth and rough. The rough surface is more hydrophilic, hemo- and cytocompatible. Compared with the DE-BP, REPEREN^® has a higher ultimate tensile stress and better biocompatibility when implanted subcutaneously in rats. The key properties of REPEREN^® showed its potential for the development of a polymeric heart valve. Further studies should be devoted to assessing the durability of REPEREN^® valves and evaluating their function during orthotopic implantation in large animals. Full article

Acoustic instabilities in solid rocket motors (SRMs) can lead to severe performance deterioration and structural damage. Nozzle damping accounts for the main acoustic dissipation source, and it is highly dependent on geometric parameters and operating conditions. This study experimentally investigated the acoustic damping characteristics of submerged nozzles in SRMs, focusing on the effects of submerged cavity dimensions, nozzle convergent angle, throat-to-port area ratio, and mean pressure variations on the longitudinal instability. The steady-state wave decay method was used to quantify the acoustic damping, and a designed rotary valve system was employed to introduce periodic pressure oscillations in the high-pressure combustion chamber. The results revealed that a larger submerged cavity would reduce the nozzle damping efficiency, with the elimination of the submerged cavity enhancing the nozzle decay coefficient magnitude by 41.9%. Furthermore, increasing the nozzle convergent angle was found to amplify acoustic wave reflection, thereby diminishing damping performance. A linear inverse relationship was observed between the throat-to-port area ratio and the decay coefficient, with a 125% increase in the ratio resulting in a 24.3% reduction in the decay coefficient. Interestingly, despite the formation of complex vortices in the submerged cavity, the mean pressure variation presented negligible effects on acoustic damping characteristics, and its damping performance is similar to a simple nozzle without a cavity. These findings provide valuable experimental data for predicting the stability of a solid rocket motor with a submerged nozzle and offer insights into the optimization of submerged nozzle designs for higher acoustic damping in SRMs. Full article

Transcatheter aortic valve implantation (TAVI) was initially developed for adult patients, but there is a growing interest to expand this procedure to younger individuals with longer life expectancies. However, the gradual degradation of biological valve leaflets in transcatheter heart valves (THV) presents significant challenges for this extension. This study aimed to establish a multiphysics computational framework to analyze structural and flow measurements of TAVI and evaluate the integration of optical fiber and photoplethysmography (PPG) sensors for monitoring valve function. A two-way fluid–solid interaction (FSI) analysis was performed on an idealized aortic vessel before and after the virtual deployment of the SAPIEN 3 Ultra (S3) THV. Subsequently, an analytical analysis was conducted to estimate the PPG signal using computational flow predictions and to analyze the effect of different pressure gradients and distances between PPG sensors. Circumferential strain estimates from the embedded optical fiber in the FSI model were highest in the sinus of Valsalva; however, the optimal fiber positioning was found to be distal to the sino-tubular junction to minimize bending effects. The findings also demonstrated that positioning PPG sensors both upstream and downstream of the bioprosthesis can be used to effectively assess the pressure gradient across the valve. We concluded that computational modeling allows sensor design to quantify vessel wall strain and pressure gradients across valve leaflets, with the ultimate goal of developing low-cost monitoring systems for detecting valve deterioration. Full article

Background: This research explores the biomechanical and structural characteristics of ascending thoracic aortic aneurysms (ATAAs), focusing on the differences between bicuspid aortic valve aneurysms (BAV-As) and tricuspid aortic valve aneurysms (TAV-As) with non-dilated aortas to identify specific traits of ATAAs. Methods: Clinical characteristics, laboratory indices, and imaging data from 26 adult patients operated on for aneurysms (BAV-A: n = 12; TAV-A: n = 14) and 13 controls were analyzed. Biomechanical parameters (maximal aortic diameter, strain, and stress) and structural analyses (collagen fiber organization, density, fragmentation, adipocyte deposits, and immune cell infiltration) were assessed. Results: Significant differences in biomechanical parameters were observed. Median maximal strain was 40.0% (control), 63.4% (BAV-A), and 45.3% (TAV-A); median maximal stress was 0.59 MPa (control), 0.78 MPa (BAV-A), and 0.48 MPa (TAV-A). BAV-A showed higher tangential modulus and smaller diameter, with substantial collagen fragmentation (p < 0.001 vs. TAV and controls). TAV-A exhibited increased collagen density (p = 0.025), thickening between media and adventitia layers, and disorganized fibers (p = 0.036). BAV-A patients had elevated adipocyte deposits and immune cell infiltration. Conclusions: This study highlights distinct pathological profiles associated with different valve anatomies. BAV-A is characterized by smaller diameters, higher biomechanical stress, and significant collagen deterioration, underscoring the necessity for tailored clinical strategies for effective management of thoracic aortic aneurysm. Full article

Pulmonary venous hypertension (PVH) is caused by deteriorating left ventricular function. The most common cause of PVH in dogs is myxomatous mitral valve degeneration (MMVD). It causes left ventricular volume overload and an increase in left atrial and pulmonary venous pressure (PVH), which leads to pulmonary vascular wall remodeling and contributes to the perpetuation and worsening of PVH. Pulmonary vascular wall remodeling is also characteristic of pulmonary arterial hypertension (PAH). However, the changes in PVH arise secondary to heart failure and vascular remodeling progresses as the disease progresses. On the other hand, PAH is a primary disease that can be triggered, for example, by the use of certain drugs. Similar structural changes may suggest the influence of similar pathophysiological mechanisms or the intermediation of similar mediators. Therefore, this article discusses recent and hitherto uncommented findings elucidating the pathophysiology of the processes and influences on the pattern of histological changes observed in pulmonary hypertension secondary to degenerative mitral valve disease. In particular, we focus on the activity of factors such as endothelin, serotonin, and nitric oxide, which are involved in pulmonary vascular wall remodeling in both PVH and PAH. Full article

Transcatheter aortic valve replacement (TAVR) has proven to be a safe, effective, and less invasive approach to aortic valve replacement in patients with aortic stenosis. In patients who underwent prior aortic valve replacement, transcatheter and surgical bioprosthetic valve dysfunction may occur as a result of structural deterioration or nonstructural causes such as prosthesis–patient mismatch (PPM) and paravalvular regurgitation. Valve-in-Valve (ViV) TAVR is a procedure that is being increasingly utilized for the replacement of failed transcatheter or surgical bioprosthetic aortic valves. Data regarding long-term outcomes are limited due to the recency of the procedure’s approval, but available data regarding the short- and long-term outcomes of ViV TAVR are promising. Studies have shown a reduction in perioperative and 30-day mortality with ViV TAVR procedures compared to redo surgical repair of failed bioprosthetic aortic valves, but 1-year and 5-year mortality rates are more controversial and lack sufficient data. Despite the reduction in 30-day mortality, PPM and rates of coronary obstruction are higher in ViV TAVR as compared to both redo surgical valve repair and native TAVR procedures. New transcatheter heart valve designs and new procedural techniques have been developed to reduce the risk of PPM and coronary obstruction. Newer generation valves, new procedural techniques, and increased operator experience with ViV TAVR may improve patient outcomes; however, further studies are needed to better understand the safety, efficacy, and durability of ViV TAVR. Full article

Over the last decades, bioprosthetic heart valves (BHV) have been increasingly implanted instead of mechanical valves in patients undergoing surgical aortic valve replacement (SAVR). Structural valve deterioration (SVD) is a common issue at follow-up and can justify the need for a reintervention. In the evolving landscape of interventional cardiology, valve-in-valve transcatheter aortic valve replacement (ViV TAVR) has emerged as a remarkable innovation to address the complex challenges of patients previously treated with SAVR and has rapidly gained prominence as a feasible technique especially in patients at high surgical risk. On the other hand, the expanding indications for TAVR in progressively younger patients with severe aortic stenosis pose the crucial question on the long-term durability of transcatheter heart valves (THVs), as patients might outlive the bioprosthetic valve. In this review, we provide an overview on the role of ViV TAVR for failed surgical and transcatheter BHVs, with a specific focus on current clinical evidence, pre-procedural planning, procedural techniques, and possible complications. The combination of integrated Heart Team discussion with interventional growth curve makes it possible to achieve best ViV TAVR results and avoid complications or put oneself ahead of time from them. Full article

In subjects with functionally bicuspid aortic valves (BAVs) with fusion between the coronary leaflets, there is a natural variation of the commissural angle. What is not fully understood is how this variation influences the hemodynamics and tissue biomechanics. These variables may influence valvar durability and function, both in the native valve and following repair, and influence ongoing aortic dilation. A 3D aortic valvar model was reconstructed from a patient with a normal trileaflet aortic valve using cardiac magnetic resonance (CMR) imaging. Fluid–structure interaction (FSI) simulations were used to compare the effects of the varying commissural angles between the non-coronary with its adjacent coronary leaflet. The results showed that the BAV with very asymmetric commissures (${120}^{\circ }$ degree commissural angle) reduces the aortic opening area during peak systole and with a jet that impacts on the right posterior wall proximally of the ascending aorta, giving rise to elevated wall shear stress. This manifests in a shear layer with a retrograde flow and strong swirling towards the fused leaflet side. In contrast, a more symmetrical commissural angle (${180}^{\circ }$ degree commissural angle) reduces the jet impact on the posterior wall and leads to a linear decrease in stress and strain levels in the non-fused non-coronary leaflet. These findings highlight the importance of considering the commissural angle in the progression of aortic valvar stenosis, the regional distribution of stresses and strain levels experienced by the leaflets which may predispose to valvar deterioration, and progression in thoracic aortic dilation in patients with functionally bicuspid aortic valves. Understanding the hemodynamics and biomechanics of the functionally bicuspid aortic valve and its variation in structure may provide insight into predicting the risk of aortic valve dysfunction and thoracic aortic dilation, which could inform clinical decision making and potentially lead to improved aortic valvar surgical outcomes. Full article