The article presents experimental results of the metal-based and carbon nanotube additives influence on sorption kinetics of a silica-gel-based adsorption bed in an adsorption chiller. The purpose of the doping is to improve the efficiency of sorptio...
This paper presents the systematic studies of the sorption capacity of natural zeolite with respect to In3+ and Ga3+ cations in the model systems “natural zeolite–In3+–H2O” and “natural zeolite–In3+–Ga3+&ndas...
The utilization of carbon-rich pyrolysis materials in the separation processes of metalloids plays a crucial role in analytes pre-concentration techniques and opens a burning issue in new sorbents development. This study characterized the effect of p...
In this work, we investigate V(V) sorption on amorphous and modified silica. Silicon dioxide was obtained from the metallurgical slag. The impact of modification on vanadium sorption was studied. The surface was modified with hydrazides (HDs) and dim...
Methanation is gaining attention as it produces green methane from CO2 and H2, through Power-to-Gas technology. This process could be improved by in situ water sorption. The main difficulty for this process intensification is to find effective water...
Water vapor sorption is the most fundamental aspect of wood-moisture relations. It is directly or indirectly related to the physical properties of wood and the onset of wood-damage mechanisms. While sorption properties of cellulosic materials have be...
The batch sorption process is used to remove various species from wastewater and can be optimised by selecting adequate process parameters and reactor geometry. As sorption is a heterogeneous process, achieving the desired process outcomes in a batch...
This paper considers modern sorption materials for wastewater treatment. The literature data on wastewater treatment with materials based on graphene and chitosan are presented. The production and application of composite sorbents is discussed. It is...
Sorption kinetics of radium on hydroxyapatite and titanium dioxide nanomaterials were studied. The main aim of the current study was to determine the rate-controlling process and the corresponding kinetic model, due to the application of studied nano...
We developed a method for characterizing permeation parameters in hydrogen sorption and desorption processes in polymers using the volumetric measurement technique. The technique was utilized for three polymers: nitrile butadiene rubber (NBR), ethyle...
Heavy metals pollution receives worldwide attention due to great toxicity, significant bio-accumulation and non-biodegradability. Adsorption is a promising technique for removing heavy metals from wastewater. Adsorption of zinc (Zn(II)) from aqueous...
Supercritical carbon dioxide (SCCO2) is a non-toxic and environmentally friendly fluid and has been used in polymerization reactions, processing, foaming, and plasticizing of polymers. Exploring the behavior and data of SCCO2 sorption and dissolution...
The composite material made by impregnating 40 wt. % lithium chloride (LiCl) into the mesopores of a kind of natural porous rock (Wakkanai Siliceous Shale: WSS) micropowders (short for “WSS + 40 wt. % LiCl”) had been developed previously,...
In this work, the effect of prewetting native and electron beam-modified wool on the resulting sorption of Cu(II) from wool solutions was studied. The following conditions and combinations were applied: 6 mM and 50 mM solutions, prewetting time 0&nda...
In the actual application of gas transport properties under high pressure, the important factors are sample size dependence and permeation efficiency, related to gas sorption. With a modified volumetric analysis technique, we firstly measured the ove...
The samples of precipitated tin (IV) phosphate, modified using hydrothermal, microwave, and mechanochemical procedures, were studied in the process of Cs(I), Sr(II), and U(VI) ion sorption. The initial and modified samples were investigated before an...
Research Highlights: When investigating the sorption of water on lignocellulosic materials, the sorption or mixing enthalpy is an interesting parameter that, together with the sorption isotherms commonly measured, can be used to characterize and unde...
99Mo/99mTc generators play a significant role in supplying 99mTc for diagnostic interventions in nuclear medicine. However, the applicability of using low specific activity (LSA) 99Mo asks for sorbents with high sorption capacity. Herein, this study...
In this study, the characteristics of coal sorbents obtained by the activation of coke fines in an atmosphere of a mixture of gases CO2 and H2O were studied. The experiment was conducted at various temperatures (700–900 °C), activation time...
The Hummer process is applied to generate graphene oxide from carbon stocks’ discharged Zn-C batteries waste. SiO2 is produced from rice husks through the wet process. Subsequently, SiO2 reacted with graphene oxide to form silica/graphene oxide...
The most promising method for the purification of concentrated technical sulfuric acid is the purification sorption method, which is the most effective and innovative, using a natural sorbent. Study of the process of sorption of iron and copper catio...
This article presents studies on the sorption of the anionic dyes Reactive Black 5 (RB5) and Reactive Yellow 84 (RY84) from solutions of single dyes and from dye mixtures onto three chitosan sorbents–chitin, chitosan DD75% and chitosan DD95%. I...
The aim of this study was to prepare activated carbon materials with different porous structures. For this purpose, the biomass precursor, beech wood, was carbonized in an inert atmosphere, and the obtained charcoal was physically activated using car...
In this work, for the first time, the sorption behaviour of platinum and palladium on polyethylene microplastics (PE-MP) was studied. To simulate natural conditions, part of PE-MP was subjected to the ageing process in lake water under the influence...
The recovery of La(III) and Ni(II) ions by a macroporous cation exchanger in sodium form (Lewatit Monoplus SP112) has been studied in batch experiments under varying HNO3 concentrations (0.2–2.0 mol/dm3), La(III) and Ni(II) concentrations (25&n...
Selective removal of arsenic from aqueous solutions with high salinity is required for safe disposal of the concentrate and protection of the environment. The use of drinking water treatment solids (DWTS) to remove arsenic from reverse osmosis (RO) c...
A process of phosphorylation for a mercerized cotton kersey fabric was investigated. After wet oxidation, the phosphorus content in each sample was determined by spectrophotometric analysis. The range was 0.179 to 0.950 mmol g–1. A significant decrea...
In this work the biosorption of cationic dyes thioflavin T (TT) and methylene blue (MB) from single and binary solutions on dried biomass of freshwater moss Vesicularia dubyana as a function of contact time, pH, and biomass or sorbate concentration h...
Model spherical polystyrene particles are studied to understand the interactions of microplastics with organic pollutants. Analysis of the experimental results presented in the literature is complicated since researchers use different types and conce...
In this study, a natural low-coast, efficient, and eco- bio-sorbent plant material (Ludwigia stolonifera), with both parts of the root and shoot, were studied for the removal of the cationic metal ions, lead Pb2+ and chromium Cr6+, via batch mode exp...
Surface charring of wood is a one-sided thermal modification process that can be used to create a hydrophobic, durable surface to exterior claddings. Spruce (Picea abies L.) wood samples were charred with a hot plate and several time-temperature comb...
This study explored the feasibility of utilizing a novel sorbent humic acid (HA) coated Fe3O4/attapulgite (MATP) magnetic nanoparticles (HMATP) for the sorption of propranolol from aqueous solutions. MATP and bare Fe3O4 nanoparticles were also synthe...
The interaction of americium by polyamide (PN6) and polyethylene (PE) microplastics (MPs) has been investigated in de-ionized and seawater samples traced with the Am-241 isotope. The effect of the pH and composition of the aqueous solution (seawater)...
23 May 2020
Iron is an essential trace element, but at high doses, this element may pose a health risk. Wastewater from iron ore mining, steel production, and metal processing, among other heavy metals, also contains high concentrations of iron (Fe3+). The use o...
This work looks at the effects of a varying concentration, soak time, pH and temperature on the sorption of tetraammineplatinum(II) chloride (Pt-Ammine) in Nafion-117 films in the context of the electroless plating of ionic polymer–metal compos...
Thiophenol (synonyms: phenyl mercaptan, benzenethiol) may appear in the aquatic environment as a result of human activity. It is used as a raw material in organic synthesis in various industries for the production of dyes, pesticides, pharmaceuticals...
This study examined the effect of modifying Canadian goldenrod (Solidago canadensis) biomass on its sorption capacity of Reactive Black 5 (RB5) and Reactive Yellow 84 anionic dyes. The scope of the research included the characteristics of sorbents (F...
An amino-functionalized magnetic macroporous copolymer of glycidyl methacrylate (GM) and ethylene glycol (E) dimethacrylate (m-poly(GME)-deta) was synthesized, fully characterized, and used to investigate the adsorption of vanadium (V) oxyanions from...
Biosorption is a bioremediation approach for the removal of harmful dyes from industrial effluents using biological materials. This study investigated Methylene blue (M. blue) and Congo red (C. red) biosorption from model aqueous solutions by two mar...
The contamination of agricultural soils by microplastics (MPs) has significant implications for herbicide efficacy and soil health. This study investigates the effects of MPs on critical processes such as the sorption, desorption, and degradation of...
Indium is an extremely important element for industry that is distributed in the Earth’s crust at very low concentrations. The recovery of indium by silica SBA-15 and titanosilicate ETS-10 was investigated at different pH levels, temperatures,...
In this study, polypropylene porous membranes with an average pore size of 1.25 µm were modified by barrier discharge plasma. Next, molecularly imprinted layers with an imprint of diethyl phthalate (DEP) ware grafted of their surface. In order to opt...
For the first time, a comprehensive study of sorbents based on manganese dioxide was carried out for beryllium sorption from seawater in laboratory and expeditionary conditions. The possibility of using several commercially available sorbents based o...
This study investigated a composite polymer desiccant material’s performance, which is prepared by impregnating solid desiccant such as sodium polyacrylate (SAP) on to hygroscopic salts such as lithium chloride (LiCl). Dehumidification performa...
The capacity of natural Na-montmorillonite and activated charcoal for sorption of diazepam from simulated intestinal fluid (SIF) was studied. The main characteristics of the sorbents were determined. In order to characterize the sorption process of d...
The aim of this study was to examine the use of zwitterionic microparticles as new and efficient macromolecular supports for the sorption of an antibiotic (doxycycline hydrochloride, DCH) from aqueous solution. The effect of relevant process paramete...
Molecularly imprinted polymers (MIPs) as well as non-imprinted polymers (NIPs) were synthesized for selective sorption of lead and terbium. The ratio of raw monomers for the terbium–MIPs’ synthesis was optimized based on the results of th...
The aim of the work was to characterize the sorption of cationic dyes thioflavine T (ThT) and methylene blue (MB) onto selected Slovakian river sediments using chemometric approaches including principal component analysis (PCA) and cluster analysis (...
Textile dyes discharged into aquatic systems can have significant environmental impacts, causing water pollution and toxicity to aquatic life, and constituting a human health risk. To manage these effects, the sorption ability of wood biowaste chemic...
The production of noble metals has started to shift towards using different types of wastes. The leaching solutions collected during the processing of waste have low concentrations of noble metals; therefore, it forces the use of sorption methods in...
of 9