Search Results (36)

The current work is established with the object of modifying the source of Fenton system and substituting iron source as a catalyst with magnetite/potato peels composite material (POT400-M) to be an innovative solar photocatalyst. The structural and morphological characteristics of the material are assessed through X-ray diffraction (XRD) and scanning electron microscopy (SEM). The technique is applied to treat oil spills that pollute seawater. The effectiveness of the operating parameters is studied, and numerical optimization is applied to optimize the most influential parameters on the system, including POT400-M catalyst (47 mg/L) and hydrogen peroxide reagent (372 mg/L) at pH 5.0, to maximize oil removal, reaching 93%. Also, the aqueous solution and wastewater temperature on the oxidation reaction is evaluated and the reaction exhibited an exothermic nature. Kinetic modeling is evaluated, and the reaction is found to follow the second-order kinetic model. Thermodynamic examination of the data exhibits negative enthalpy (ΔH′) values, confirming that the reaction is exothermic, and the system is verified to be able to perform at the minimal activation energy barrier (−51.34 kJ/mol). Full article

The extensive use of herbicide 2-methyl-4-chlorophenoxyacetic acid (MCPA), coupled with its limited biodegradability, has led to its ubiquitous presence in aquatic environments. This work investigates the removal of MCPA (100 mg/L) in the aqueous phase via solar photo-Fenton. The process was carried out in a 700 mL reactor using a Xe lamp that simulates solar radiation (λ: 250–700 nm). A parametric study was conducted to assess the influence of dissolved O₂ on the reaction medium, Fe²⁺ dosage, H₂O₂ concentration and pH₀. The results indicate that dissolved O₂ boosts pollutant mineralization, even working at sub-stoichiometric H₂O₂ concentrations. Under optimal reaction conditions ([Fe²⁺]: 7.5 mg/L, [H₂O₂]₀: 322 mg/L (stoichiometric dose), pH₀: 3.5), the MCPA reached almost complete mineralization (X_TOC: 98.40%) in 180 min. Phytotoxicity and ecotoxicity assessments of treated effluents revealed that even working at sub-stoichiometric H₂O₂ dosages, toxicity decreases with the solar photo-Fenton treatment. Finally, the solar photo-Fenton process was evaluated in relevant matrices (river water and WWTP secondary effluent) and a realistic pollutant concentration (100 µg/L). In all cases, the pollutant degradation was ≥70% in 60 min, demonstrating the potential of this technology as a tertiary treatment. Full article

Pisco is an emblematic spirit in Peru and Chile, made from fermented grapes, gaining growing scientific interest over the last two decades. This study aimed to map 20 years of research on Pisco through a systematic bibliometric review. A search was conducted in the Scopus database covering the period from 2004 to 2024, applying the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology for the transparent selection of scientific articles. The search strategy considered titles, abstracts, and keywords, using the terms “Pisco” and “schnapps”, excluding unrelated fields such as geology (basin, seismic, fossil). The initial search yielded 360 records. After removing non-original articles (books, book chapters, conference papers, and reviews), 101 articles remained. A further screening excluded irrelevant studies (e.g., those referring to the city of Pisco rather than the beverage), resulting in 78 articles included for final analysis. It was observed that 19% of the studies focus on the history, culture, and appellation of origin; 14% on environmental sustainability; 10% on innovation and quality; and 9% on the bioactive properties of by-products. Other areas include extraction technologies (9%), distillation process modeling (8%), and marketing and economics (8%), among others. Recent trends are related to clean production practices. Thus, Pisco by-products and their components can be exploited by applying technologies such as supercritical fluids, drying, and biofilms, while, for waste management, the processes of composting, solar photo-Fenton, and ozonation can be applied. Moreover, it is important to highlight that the valorization of Pisco by-products opens opportunities for translation into the market, particularly in developing cosmetics, nutritional supplements, and bio-packaging materials, contributing to sustainability and innovation in new industries. However, a more holistic view is still needed in Pisco research. These findings suggest that future research should prioritize the integration of consumer-based sensory evaluations and sustainable production innovations to optimize Pisco’s quality, enhance market acceptance, and promote environmentally responsible industry practices. Full article

A binary Fe₂O₃/Fe₃O₄ mixed nanocomposite was prepared by phyto-mediated avenue to be suited in the photo-Fenton photodegradation of methylene blue (MB) in the presence of H₂O₂. XRD and SEM analyses illustrated that Fe₂O₃ nanoparticles of average crystallite size 8.43 nm were successfully mixed with plate-like aggregates of Fe₃O₄ with a 15.1 nm average crystallite size. Moreover, SEM images showed a porous morphology for the binary Fe₂O₃/Fe₃O₄ mixed nanocomposite that is favorable for a photocatalyst. EDX and elemental mapping showed intense iron and oxygen peaks, confirming composite purity and symmetrical distribution. FTIR analysis displayed the distinct Fe-O assignments. Moreover, the isotherm of the developed nanocomposite showed slit-shaped pores in loose particulates within plate-like aggregates and a mesoporous pore-size distribution. Thermal gravimetric analysis (TGA) indicated the high thermal stability of the prepared Fe₂O₃/Fe₃O₄ binary nanocomposite. The optical properties illustrated a narrowing in the band gab (Eg = 2.92 eV) that enabled considerable absorption in the visible region of solar light. Suiting the developed binary Fe₂O₃/Fe₃O₄ nanocomposite in the photo-Fenton reaction along with H₂O₂ supplied higher productivity of active oxidizing species and accordingly a higher degradation efficacy of MB. The solar-driven photodegradation reactions were conducted and the estimated rate constants were 0.002, 0.0047, and 0.0143 min⁻¹ when using the Fe₂O₃/Fe₃O₄ nanocomposite, pure H₂O₂, and the Fe₂O₃/Fe₃O₄/H₂O₂ hybrid catalyst, respectively. Therefore, suiting the developed binary Fe₂O₃/Fe₃O₄ nanocomposite and H₂O₂ in photo-Fenton reaction supplied higher productivity of active oxidizing species and accordingly a higher degradation efficacy of MB. After being subjected to four photo-Fenton degradation cycles, the Fe₂O₃/Fe₃O₄ nanocomposite catalyst still functioned admirably. Further evaluation of Fe₂O₃/Fe₃O₄ nanocomposite in photocatalytic remediation of contaminated water using a mixture of MB and pyronine Y (PY) dyestuffs revealed substantial dye photodegradation efficiencies. Full article

Dairy wastewater (DW) contains a high concentration of organic and inorganic pollutants. In recent years, extensive research has been conducted to develop more efficient techniques for the treatment of DW. Electrochemical advanced oxidation processes (EAOPs) have gained significant attention among the various treatment approaches. EAOPs rely on electrochemical generation of hydroxyl radicals (•OH) which are considered highly potent oxidizing compounds for the degradation of pollutants in DW. In this paper, we provide an overview of the treatment of DW using various EAOPs, including anodic oxidation (AO), electro-Fenton (EF), photo electro-Fenton (PEF), and solar photo electro-Fenton (SPEF) processes, both individually and in combination with other techniques. Additionally, we discuss the reactor design and operating parameters employed in EAOPs. The variation in degradation efficiency is due to different oxidizing agents produced in specific approaches and their pollutant degradation abilities. In AO process, •OH radicals generated on electrode surfaces are influenced by electrode material and current density, while EF procedures use Fe²⁺ to create oxidizing agents both on electrodes and in the DW solution, with degradation mechanisms being affected by Fe²⁺, pH, and current density; additionally, PEF and SPEF approaches enhance oxidizing component production and pollutant degradation using ultraviolet (UV) light. Integration of EAOPs with other biological processes can enhance the pollutant removal efficiency of the treatment system. There is a scope of further research to exhibit the effectiveness of EAOPs for DW treatment in large scale implementation. Full article

Metal oxide semiconductor-based photocatalysis and advanced oxidation processes (AOPs) are effective in treating various recalcitrant pollutants such as organic dyes present in industrial wastewater streams. AOPs rely on the highly reactive hydroxyl radicals (OH^•) that facilitate the non-selective destruction of most organic pollutants. Here, we present the novel synthesis of mesoporous FeTiO₃ catalyst via a simple, hard template-free, aqueous-solution-based hydrothermal synthesis method. The surfactant, tetradecyltrimethylammonium bromide (TTAB), was used as the structure-directing agent, the removal of which led to the formation of the mesoporous structure. The catalyst was characterized by thermo-gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Branauer–Emette–Teller analysis (BET), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques. The obtained catalyst has been studied for its photocatalytic application in the presence of H₂O₂ towards the degradation of organic dyes as representative pollutants, namely, rhodamine B (RhB) and methylene blue (MB) under direct solar light irradiation. The various characterizations confirm the formation of mesoporous FeTiO₃ with a pore size of ≈7.5 nm and a specific surface area of 65 ± 5 m²/g. The influence of H₂O₂ oxidant on the removal of the said dyes has also been studied at various concentrations in the presence of the synthesized catalyst to determine the optimum dosage of H₂O₂. The catalyst was efficient in the complete synergistic adsorption-led photo-Fenton-like removal of MB in just 30 min of irradiation time, while the 96% RhB was degraded in 240 min. Moreover, this catalyst has also shown potential for fluoride adsorption that reaches up to more than 50% in 90 min. Full article

Acid Red 88 (AR88) is an azo dye highly used in the textile industry. This industry generates high volumes of wastewater with recalcitrant properties that can persist in nature for many years. This work intends to use a statistical model to better predict and understand the influence of different operational conditions. A Box-Behnken response surface methodology (RSM) was used, in which variables (H₂O₂, Fe²⁺, and radiation intensity) were changed. At the same time, the RSM model allowed the assessment of several advanced oxidation processes (AOPs). The results exhibited the photo-Fenton process as the most efficient, and the best operational conditions ([AR88] = 0.125 mM, pH = 3.0, [H₂O₂] = 7.9 mM, [Fe²⁺] = 0.22 mM, time = 30 min) were used in four different reactors (UV-C, UV-A, ultrasound, and solar). US reactors achieved high AR88 removal (98.2%, 50 min), similar to UV-C and UV-A (97.8 and 98.2%, respectively, 60 min). A solar reactor is concluded to be the most feasible choice, with 98.4% AR88 removal after 25 min. Full article

MoS₂ has garnered considerable attention as an exceptional co-catalyst that is capable of significantly enhancing the efficiency of H₂O₂ decomposition in advanced oxidation processes (AOPs). This improvement allows for a reduction in the required amounts of H₂O₂ and Fe²⁺. In this study, we investigated the cyclic durability of photo-Fenton catalysts, focusing on the degradation of pollutants through the introduction of PPy into heterogeneous 1T-2H MoS₂ units. The resulting photothermal-Fenton catalysts, comprising non-ferrous Fenton catalysts, demonstrated excellent degradation performance for simulated pollutants. In comparison with 1T-2H MoS₂, the PPy@1T-2H MoS₂ composite exhibited remarkable stability and photothermal enhancement in the photo-Fenton degradation of methylene blue (MB) under visible light irradiation. The photo-Fenton reaction efficiently degraded contaminants, achieving 99% removal within 5 min and 99.8% removal within 30 min. Moreover, the co-catalyst complex displayed enhanced cyclic stability during the photo-Fenton reaction, with a contaminant removal efficiency of 92%, even after the 13th cyclic test. The combined effects of PPy and 1T-2H MoS₂ demonstrated improved efficiency in both photocatalytic and photo-Fenton catalytic reactions. Furthermore, PPy@1T-2H MoS₂ exhibited outstanding performance in the photothermal evaporation of water, achieving an efficiency of 86.3% under one solar irradiation. Full article

Thermally synthesized graphitic carbon nitride (g-C₃N₄) over pulsed laser deposition (PLD) produced urchin-like iron oxide (FeOx) thin films were fabricated via in situ and ex situ processes. Materials characterisation revealed the formation of the graphitic allotrope of C₃N₄ and a bandgap E_g for the combined FeOx/g-C₃N₄ of 1.87 and 1.95 eV for each of the different fabrication strategies. The in situ method permitted to develop a novel petal-like morphology, whereas for the ex situ method, a morphological mixture between FeOx bulk and g-C3N4 was observed. Given the improved optical and morphological properties of the in situ film, it was employed as a proof of concept for the direct photocatalysis and photo-Fenton removal of ciprofloxacin antibiotic (CIP) under visible light irradiation. Improved photocatalytic activity (rate constant k = 8.28 × 10⁻⁴ min⁻¹) was observed, with further enhancement under photo-Fenton conditions (k = 2.6 × 10⁻³ min⁻¹), in comparison with FeOx + H₂O₂ (k = 1.6 × 10⁻³ min⁻¹) and H₂O₂ only (k = 1.3 × 10⁻⁴ min⁻¹). These effects demonstrate the in situ methodology as a viable route to obtain working heterojunctions for solar photocatalysis in thin-film materials, rather than the more common powder materials. Full article

In this study, the solar photo-Fenton (SPF) process was investigated for the degradation of doxycycline (DOX) using a solar compound parabolic collector (CPC) reactor and a borosilicate serpentine tube with an irradiated volume of 1.8 L. The influence of the operating parameters, such as H₂O₂, Fe²⁺ dosage, and DOX concentration, was investigated. The optimum H₂O₂, Fe²⁺ dosage, and DOX concentration were found to be 4, 0.1, and 0.06 mM, respectively. The results of photo-Fenton experiments fitted the pseudo-first-order kinetic equation (R² = 0.99). The efficiency of the treatment under optimized conditions was analyzed by an HPLC analysis of the samples, chemical oxygen demand (COD), and total organic carbon (TOC). The results obtained showed that the solar photo-Fenton process achieved a DOX degradation of 95.07%, a COD elimination of 81.43%, and a TOC elimination of 73.05%. The phytotoxicity tests revealed a 73.32% decrease in the germination index of watercress seeds, demonstrating that the SPF process minimizes the toxicity of the chemical and did not have any negative impact on plant growth. Overall, the results of this study suggest that SPF is a promising technology for the removal of doxycycline from wastewater. Full article

Acid mine drainage was utilized to catalyze the solar photo-Fenton treatment of wastewater coming from a sludge dewatering system. Acid mine drainage in the form of iron-rich liquid or synthesized minerals (namely magnetite, hematite, and goethite) was added in the wastewater, which was treated by means of the solar photo-Fenton process. The effects of operational parameters such as the amount of acid mine drainage, the wastewater matrix (i.e., synthetic and real wastewater), and the initial H₂O₂ concentration municipal wastewater’s organic content were explored. The results showed that using acid mine drainage (liquid phase) for wastewater treatment was more efficient than using the acid-mine-drainage-recovered minerals. Moreover, it was observed that the addition of acid mine drainage above 10.7 mL/L wastewater, which is equivalent to 50 mg/L iron, could substantially reduce the removal percentage of the chemical oxygen demand (COD). At the best conditions assayed, COD removal reached 99% after 90 min of photo-Fenton treatment under simulated solar light, in the presence of 30 mg/L Fe (i.e., 6.4 mL drainage/L of real wastewater) and 1000 mg/L H₂O₂ at a pH of 2.8. Therefore, the solar photo-Fenton treatment of municipal wastewater catalyzed by acid mine drainage may appear to be a promising method to effectively improve wastewater management, especially in areas with high solar energy potential. Full article

Denim production wastewater is an industrial wastewater with a high organic pollutant content. The aim of this study was to improve a cost-effective method via solar panel integration to the photo Fenton process (PFP) and photo electrochemical Fenton process (PEFP) for removing high chemical oxygen demand (COD) from denim production wastewater. To determine process parameter values, the double criterial optimization option was used. The results that maximized the COD removal efficiency and minimized the operating cost of two oxidation processes were determined by response surface methodology (RSM). Optimum operation conditions for the PFP process were 3.18 initial pH, 2.3 g/L Fe²⁺ concentration, and 27 g/L H₂O₂ concentration while they were 3.00 initial pH, 27.06 A/m² current density, and 28.16 g/L H₂O₂ concentration for PEFP. At the optimum conditions, COD and the total organic carbon (TOC) removal efficiency of PFP were 85% and 61%, respectively. They were determined as 90% and 73% in PEFP. Carbon oxidation state (COS) and average oxidation state (AOS) parameters were used to obtain the biodegradation capability of organic materials. The biodegradability capability of wastewater was observed as high after the Fenton processes. As a result of the optimization of technical parameters, total operating cost was obtained as USD 14.62/m³ (USD 4.25/kgCOD_removed) in PFP and USD 13.79/m³ (USD 3.73/kgCOD_removed) in PEFP. After the integration of the photovoltaic solar panel to the processes, the total operating cost of PFP and PEFP decreased in a ratio of 61% and 64%, respectively. Full article

One of the biggest problems the world is currently experiencing is wastewater treatment. Numerous pollutants are released into water bodies by enormous amounts of effluents from varied sources. This paper provides a concise summary of the state of the art in AOPs, biological treatment, and their efficient application for the degradation of the numerous recalcitrant organic contaminants found in wastewater. The employment of a photoreactor is necessary for the efficient execution of the majority of photocatalytic processes. This review examines the effectiveness of several reactor configurations with varying geometries. Integrating different AOPs and AOPs with biological approaches for degrading pollutants in wastewater was also discussed. It is important to emphasize that an integrated AOP/biological system produces by-products that are not hazardous, uses little energy, and completely degrades pollutants. The review also outlines the challenges and issues of wastewater treatment for an environmentally and economically feasible process. Full article

Heterogeneous catalysts based on magnetite nanoparticles, Fe₃O₄, were prepared by the chemical coprecipitation method using iron (III) chloride as a salt precursor. The physicochemical properties of the nanoparticles were determined by different techniques and the efficiency was evaluated for the degradation of the cytostatic drug, 5-fluorouracil (5-FU), in aqueous solution by photo-Fenton process under simulated solar radiation. The most influential parameters, namely pH of the solution, catalyst load, H₂O₂ dosage, and use of radiation, were studied and optimized in the degradation process. The optimal conditions to achieve a 100% degradation of 5-FU (10 mg L⁻¹) and a high mineralization degree (76%) were established at the acidic pH of 3.0, 100 mg L⁻¹ of catalyst loading, and 58 mM of H₂O₂ under simulated solar radiation. The contribution of iron leaching to the catalyst deactivation, the role of the dissolved iron ions on homogenous reactions, and the stability of the catalyst were assessed during consecutive reaction cycles. Full article

The electrochemical oxidation (EO) of the breast-cancer drug anastrozole (ANZ) is studied in this work. The role of various operating parameters, such as current density (6.25 and 12.5 mA cm⁻²), pH (3–10), ANZ concentration (0.5–2 mg L⁻¹), nature of supporting electrolytes, water composition, and water matrix, have been evaluated. ANZ removal of 82.4% was achieved at 1 mg L⁻¹ initial concentration after 90 min of reaction at 6.25 mA cm⁻² and 0.1 M Na₂SO₄. The degradation follows pseudo-first-order kinetics with the apparent rate constant, k_app, equal to 0.022 min⁻¹. The k_app increases with increasing current density and decreasing solution pH. The addition of chloride in the range 0–250 mg L⁻¹ positively affects the removal of ANZ. However, chloride concentrations above 250 mg L⁻¹ have a detrimental effect. The presence of bicarbonate or organic matter has a slightly negative but not significant effect on the process. The EO of ANZ is compared to its degradation by solar photo-Fenton, and a preliminary economic analysis is also performed. Full article