Search Results (21)

The natural remineralization of enamel is of major importance for oral health. In principle, early erosions (demineralization) induced by acidic beverages and foods as well as initial caries lesions can be covered and remineralized by the deposition of calcium phosphate, i.e., tooth mineral. This remineralization effect is characterized by the presence of calcium and phosphate ions in saliva that form hydroxyapatite on the enamel surface. Although it is apparently a simple crystallization, it turns out that remineralization under in vivo conditions is actually a very complex process. Calcium phosphate can form a number of solid phases of which hydroxyapatite is only one. Precipitation involves the formation of metastable phases like amorphous calcium phosphate that convert into biological apatite in a number of steps. Nanoscopic clusters of calcium phosphate that can attach on the enamel surface are also present in saliva. Thus, remineralization under strictly controlled in vitro conditions (e.g., pH, ion concentrations, no additives) is already complex, but it becomes even more complicated under the actual conditions in the oral cavity. Here, biomolecules are present in saliva, which interact with the forming calcium phosphate mineral. For instance, there are salivary proteins which have the function of inhibiting crystallization to avoid overshooting remineralization. Finally, the presence of bacteria and an extracellular matrix in plaque and the presence of proteins in the pellicle have strong influences on the precipitation on the enamel surface. The current knowledge on the remineralization of the enamel is reviewed from a chemical perspective with a special focus on the underlying crystallization phenomena and the effects of biological compounds that are present in saliva, pellicle, and plaque. Basically, the remineralization of enamel follows the same principles as calculus formation. Notably, both processes are far too complex to be understood on a microscopic basis under in vivo conditions, given the complicated process of mineral formation in the presence of a plethora of foreign ions and biomolecules. Full article

The aim of this in vivo study was to compare total protein present in the salivary films (F) and acquired enamel pellicle (AEP) on eroded and non-eroded surfaces in patients suffering from GORD symptoms with and without GORD diagnosis (GORD, No-GORD). Thirty-nine patients suffering from GORD symptoms and erosive tooth wear on lower first molars and an unaffected posterior occlusal surface in the same quadrant were recruited from Guy’s hospital, London. Salivary film and AEP were collected from the eroded and uneroded occlusal surfaces, using 0.5% sodium dodecyl sulphate (SDS)-soaked filter papers. Total protein concentration was analysed using bicinchoninic acid assay (BCA). Statistical analysis was conducted using Shapiro–Wilk, ANOVA, and Tukey’s tests (p < 0.05), comparing four GDS sample types and GORD vs. No-GORD groups. The level of significance was set as p < 0.05. Data were compared between eroded and uneroded surfaces in the same patient with GORD symptoms, as well as between those with or without a GORD diagnosis (GORD, No-GORD). The AEP total protein concentration from the eroded [2.17 (0.49) mg/mL] and uneroded surfaces [2.24 (0.66) mg/mL] of the GORD group were statistically significantly lower than those on eroded [3.27 (1.01) mg/mL] and uneroded [3.33 (1.57) mg/mL] surfaces in the No-GORD group (p = 0.007) (p = 0.008), respectively. No statistically significant differences were observed for film and AEP between eroded and uneroded surfaces (p > 0.05). Full article

Streptococcus gordonii is a gram-positive, mutualistic bacterium found in the human body. It is found in the oral cavity, upper respiratory tract, and intestines, and presents a serious clinical problem because it can lead to opportunistic infections in individuals with weakened immune systems. Streptococci are the most prevalent inhabitants of oral microbial communities, and are typical oral commensals found in the human oral cavity. These streptococci, along with many other oral microbes, produce multispecies biofilms that can attach to salivary pellicle components and other oral bacteria via adhesin proteins expressed on the cell surface. Antibiotics are effective against this bacterium, but resistance against antibodies is increasing. Therefore, a more effective treatment is needed. Vaccines offer a promising method for preventing this issue. This study generated a multi-epitope vaccine against Streptococcus gordonii by targeting the completely sequenced proteomes of five strains. The vaccine targets are identified using a pangenome and subtractive proteomic approach. In the present study, 13 complete strains out of 91 strains of S. gordonii are selected. The pangenomics results revealed that out of 2835 pan genes, 1225 are core genes. Out of these 1225 core genes, 643 identified as non-homologous proteins by subtractive proteomics. A total of 20 essential proteins are predicted from non-homologous proteins. Among these 20 essential proteins, only five are identified as surface proteins. The vaccine construct is designed based on selected B- and T-cell epitopes of the antigenic proteins with the help of linkers and adjuvants. The designed vaccine is docked against TLR2. The expression of the protein is determined using in silico gene cloning. Findings concluded that Vaccine I with adjuvant shows higher interactions with TLR2, suggesting that the vaccine has the ability to induce a humoral and cell-mediated response to treat and prevent infection; this makes it promising as a vaccine against infectious diseases caused by S. gordonii. Furthermore, validation of the vaccine construct is required by in vitro and in vivo trials to check its actual potency and safety for use to prevent infectious diseases caused by S. gordonii. Full article

Cellulose nanocrystals (CNCs) are cellulose-derived nanomaterials that can be easily obtained, e.g., from vegetable waste produced by circular economies. They show promising antimicrobial activity and an absence of side effects and toxicity. This study investigated the ability of CNCs to reduce microbial adherence and biofilm formation using in vitro microbiological models reproducing the oral environment. Microbial adherence by microbial strains of oral interest, Streptococcus mutans and Candida albicans, was evaluated on the surfaces of salivary pellicle-coated enamel disks in the presence of different aqueous solutions of CNCs. The anti-biofilm activity of the same CNC solutions was tested against S. mutans and an oral microcosm model based on mixed plaque inoculum using a continuous-flow bioreactor. Results showed the excellent anti-adherent activity of the CNCs against the tested strains from the lowest concentration tested (0.032 wt. %, p < 0.001). Such activity was significantly higher against S. mutans than against C. albicans (p < 0.01), suggesting a selective anti-adherent activity against pathogenic strains. At the same time, there was a minimal, albeit significant, anti-biofilm activity (0.5 and 4 wt. % CNC solution for S. mutans and oral microcosm, respectively, p = 0.01). This makes CNCs particularly interesting as anticaries agents, encouraging their use in the oral field. Full article

The mucosal pellicle (MP) is a biological film protecting the oral mucosa. It is composed of bounded salivary proteins and transmembrane mucin MUC1 expressed by oral epithelial cells. Previous research indicates that MUC1 expression enhances the binding of the main salivary protein forming the MP, MUC5B. This study investigated the influence of MUC1 structure on MP formation. A TR146 cell line, which does not express MUC1 natively, was stably transfected with genes coding for three MUC1 isoforms differing in the structure of the two main extracellular domains: the VNTR domain, exhibiting a variable number of tandem repeats, and the SEA domain, maintaining the two bound subunits of MUC1. Semi-quantification of MUC1 using dot blot chemiluminescence showed comparable expression levels in all transfected cell lines. Semi-quantification of MUC5B by immunostaining after incubation with saliva revealed that MUC1 expression significantly increased MUC5B adsorption. Neither the VNTR domain nor the SEA domain was influenced MUC5B anchoring, suggesting the key role of the MUC1 N-terminal domain. AFM-IR nanospectroscopy revealed discernible shifts indicative of changes in the chemical properties at the cell surface due to the expression of the MUC1 isoform. Furthermore, the observed chemical shifts suggest the involvement of hydrophobic effects in the interaction between MUC1 and salivary proteins. Full article

(1) Background: In the oral environment, sound enamel and dental restorative materials are immediately covered by a pellicle layer, which enables bacteria to attach. For the development of new materials with repellent surface functions, information on the formation and maturation of salivary pellicles is crucial. Therefore, the present in situ study aimed to investigate the proteomic profile of salivary pellicles formed on different dental composites. (2) Methods: Light-cured composite and bovine enamel samples (controls) were exposed to the oral cavity for 30, 90, and 120 min. All samples were subjected to optical and mechanical profilometry, as well as SEM surface evaluation. Acquired pellicles and unstimulated whole saliva samples were analyzed by SELDI–TOF–MS. The significance was determined by the generalized estimation equation and the post-hoc bonferroni adjustment. (3) Results: SEM revealed the formation of homogeneous pellicles on all test and control surfaces. Profilometry showed that composite surfaces tend to be of higher roughness compared to enamel. SELDI–TOF–MS detected up to 102 different proteins in the saliva samples and up to 46 proteins in the pellicle. Significant differences among 14 pellicle proteins were found between the composite materials and the controls. (4) Conclusions: Pellicle formation was material- and time-dependent. Proteins differed among the composites and to the control. Full article

The microbiological behavior of dental polymer materials is crucial to secure the clinical success of dental restorations. Here, the manufacturing process and the machining can play a decisive role. This study investigated the bacterial adhesion on dental polymers as a function of manufacturing techniques (additive/subtractive) and different polishing protocols. Specimens were made from polyaryletherketone (PEEK, PEKK, and AKP), resin-based CAD/CAM materials (composite and PMMA), and printed methacrylate (MA)-based materials. Surface roughness (R_z; R_a) was determined using a laser scanning microscope, and SFE/contact angles were measured using the sessile drop method. After salivary pellicle formation, in vitro biofilm formation was initiated by exposing the specimens to suspensions of Streptococcus mutans (S. mutans) and Streptococcus sanguinis (S. sanguinis). Adherent bacteria were quantified using a fluorometric assay. One-way ANOVA analysis found significant influences (p < 0.001) for the individual parameters (treatment and material) and their combinations for both types of bacteria. Stronger polishing led to significantly (p < 0.001) less adhesion of S. sanguinis (Pearson correlation PC = −0.240) and S. mutans (PC = −0.206). A highly significant (p = 0.010, PC = 0.135) correlation between S. sanguinis adhesion and R_z was identified. Post hoc analysis revealed significant higher bacterial adhesion for vertically printed MA specimens compared to horizontally printed specimens. Furthermore, significant higher adhesion of S. sanguinis on pressed PEEK was revealed comparing to the other manufacturing methods (milling, injection molding, and 3D printing). The milled PAEK samples showed similar bacterial adhesion. In general, the resin-based materials, composites, and PAEKs showed different bacterial adhesion. Fabrication methods were shown to play a critical role; the pressed PEEK showed the highest initial accumulations. Horizontal DLP fabrication reduced bacterial adhesion. Roughness < 10 µm or polishing appear to be essential for reducing bacterial adhesion. Full article

Background: Bioadhesion and surface interactions on enamel are of essential relevance for initiation, progression and prevention of caries and erosions. Salivary proteins on and within initial carious and erosive lesions can facilitate or aggravate de- and remineralization. This applies for the pellicle layer, the subsurface pellicle and for proteins within initial carious lesions. Little is known about these proteinaceous structures related to initial caries and erosion. Accordingly, there is a considerable demand for an understanding of the underlying processes occurring at the interface between the tooth surface and the oral cavity in order to develop novel agents that limit and modulate caries and erosion. Objectives and findings: The present paper depicts the current knowledge of the processes occurring at the interface of the tooth surface and the oral fluids. Proteinaceous layers on dental hard tissues can prevent or aggravate demineralization processes, whereas proteins within initial erosive or carious lesions might hinder remineralization considerably and restrict the entry of ions into lesions. Conclusions: Despite the fact that organic–inorganic surface interactions are of essential relevance for de- and remineralization processes at the tooth surface, there is limited knowledge on these clinically relevant phenomena. Accordingly, intensive research is necessary to develop new approaches in preventive dentistry. Full article

A nonrestorative approach to the management of dental erosion is the foremost option: controlling dental erosion. The objectives of this study are to provide an overview and to summarise the effects and properties of topical anti-erosive agents as a nonrestorative treatment of dental erosion. A literature search was conducted on five databases of peer-reviewed literature—Cochrane Library, EMBASE, PubMed, Scopus and Web of Science—to recruit articles published between 1 January 2000 and 31 December 2021. The literature search identified 812 studies; 95 studies were included. Topical anti-erosive agents can be broadly categorised as fluorides, calcium phosphate-based agents, organic compounds and other anti-erosive agents. In the presence of saliva, fluorides promote the formation of fluorapatite on teeth through remineralisation. Calcium phosphate-based agents supply the necessary minerals that are lost due to the acid challenge of erosion. Some organic compounds and other anti-erosive agents prevent or control dental erosion by forming a protective layer on the tooth surface, by modifying salivary pellicle or by inhibiting the proteolytic activity of dentine collagenases. Topical anti-erosive agents are promising in managing dental erosion. However, current evidence shows inconsistent or limited results for supporting the use of these agents in clinical settings. Full article

Engineering of the acquired enamel pellicle using salivary peptides has been shown to be a promising anticaries strategy. However, the mechanisms by which these peptides protect teeth against tooth decay are not fully understood. In this study, we evaluated the effect of the engineered salivary peptides DR9-DR9 and DR9-RR14 on enamel demineralization in two experimental conditions: (1) adsorbed onto the enamel surface forming the AEP, and (2) forming the AEP combined with their use to treat the biofilms 2×/day, using a validated cariogenic Streptococcus mutans in vitro biofilm model. Biofilms were grown for 144 h on enamel slabs and then collected to determine the bacterial viability (CFU/biofilm) and biofilm mass (mg protein/biofilm), and to extract cellular/extracellular proteins, which were characterized by mass spectrometry. The culture medium was changed 2×/day to fresh medium, and pH (indicator of biofilm acidogenicity) and calcium concentration (indicator of demineralization) was determined in used medium. DR9-RR14 peptide significantly reduced enamel demineralization (p < 0.0001) in both experimental conditions. However, this peptide did not have a significant effect on biofilm biomass (p > 0.05) nor did it modulate the expression of cellular and extracellular bacterial proteins involved in biofilm cariogenicity. These findings suggest that DR9-RR14 may control caries development mainly by a physicochemical mechanism. Full article

The oral microbiome, forming a biofilm that covers the oral structures, contains a high number of microorganisms. Biofilm formation starts from the salivary pellicle that allows bacterial adhesion–colonization–proliferation, co-aggregation and biofilm maturation in a complex microbial community. There is a constant bidirectional crosstalk between human host and its oral microbiome. The paper presents the fundamentals regarding the oral microbiome and its relationship to modulator factors, oral and systemic health. The modern studies of oral microorganisms and relationships with the host benefits are based on genomics, transcriptomics, proteomics and metabolomics. Pharmaceuticals such as antimicrobials, prebiotics, probiotics, surface active or abrasive agents and plant-derived ingredients may influence the oral microbiome. Many studies found associations between oral dysbiosis and systemic disorders, including autoimmune diseases, cardiovascular, diabetes, cancers and neurodegenerative disorders. We outline the general and individual factors influencing the host–microbial balance and the possibility to use the analysis of the oral microbiome in prevention, diagnosis and treatment in personalized medicine. Future therapies should take in account the restoration of the normal symbiotic relation with the oral microbiome. Full article

Since the modification of the proteinaceous components of the Acquired Enamel Pellicle (AEP) could influence the adhesion of Streptococcus mutans, the most cariogenic bacteria, to dental surfaces, we assessed if engineered salivary peptides would affect the adherence and modulate the bacterial proteome upon adherence. Single-component AEPs were formed onto hydroxyapatite (HAp) discs by incubating them with statherin, histatin-3, DR9, DR9-DR9, DR9-RR14, RR14, and parotid saliva. Then, the discs were inoculated with S. mutans UA159 and the bacteria were allowed to adhere for 2 h, 4 h, and 8 h (n = 12/treatment/time point). The number of bacteria adhered to the HAp discs was determined at each time point and analyzed by two-way ANOVA and Bonferroni tests. Cell-wall proteins were extracted from adhered, planktonic, and inoculum (baseline) bacteria and proteome profiles were obtained after a bottom-up proteomics approach. The number of adhered bacteria significantly increased over time, being the mean values obtained at 8 h, from highest to lowest, as follows: DR9-RR14 > statherin > RR14 = DR9-DR9 > DR9 = histatin3 > saliva (p < 0.05). Treatments modulated the bacterial proteome upon adherence. The findings suggested a potential use of our engineered peptide DR9-DR9 to control S. mutans biofilm development by reducing bacterial colonization. Full article

Denture plaque control for the prevention of aspiration pneumonia is very important. The pellicle is the major cause of denture plaque adhesion. Few basic studies have evaluated the effectiveness of denture cleansers for pellicles composed of salivary proteins. The adhesion of salivary proteins formed on denture base metal and the removal rate were quantitatively analyzed using the QCM method after denture cleanser injection. This is the first study to compare the cleaning effects of denture cleanser on denture base metal using the QCM method. Au and Ti sensors were employed as the denture base metals. Albumin was used for the adsorption of salivary proteins. The results showed that no significant difference was found between Au and Ti in the amounts of albumin adsorbed, and the rate of albumin removal from Ti was significantly higher than that of Au. In this study, the cleaning effectiveness of denture cleanser was confirmed based on the adsorbed amount and the removal rate of salivary proteins adsorbed onto denture base metals. Thus, the QCM method was suggested to be a useful tool for removing the effects of salivary proteins from denture cleaning agents on denture base metal. Full article

Caries is one of the most prevalent diseases worldwide, which is caused by the degradation of the tooth enamel surface. In earlier research the opportunistic pathogen Candida albicans has been associated with the formation of caries in children. Colonization of teeth by C. albicans starts with the initial adhesion of individual yeast cells to the tooth enamel surface. In this study, we visualized the initial colonization of C. albicans yeast cells on pellicle-covered enamel by scanning electron microscopy. To quantitatively unravel the initial adhesion strength, we applied fluidic force microscopy-based single-cell force spectroscopy to examine the key adhesion parameters adhesion force, rupture length and de-adhesion work. We analyzed single saliva-treated or untreated yeast cells on tooth enamel specimens with or without salivary pellicle. Under all tested conditions, adhesion forces in the lower nanonewton range were determined. Furthermore, we have found that all adhesion parameters were enhanced on the pellicle-covered compared to the uncovered enamel. Our data suggest that initial adhesion occurs through a strong interaction between yeast cell wall-associated adhesins and the salivary pellicle. Future SCFS studies may show whether specific management of the salivary pellicle reduces the adhesion of C. albicans on teeth and thus contributes to caries prophylaxis. Full article

Studies on small quantity, highly complex protein samples, such as salivary pellicle, have been enabled by recent major technological and analytical breakthroughs. Advances in mass spectrometry-based computational proteomics such as Multidimensional Protein Identification Technology have allowed precise identification and quantification of complex protein samples on a proteome-wide scale, which has enabled the determination of corresponding genes and cellular functions at the protein level. The latter was achieved via protein-protein interaction mapping with Gene Ontology annotation. In recent years, the application of these technologies has broken various barriers in small-quantity-complex-protein research such as salivary pellicle. This review provides a concise summary of contemporary proteomic techniques contributing to (1) increased complex protein (up to hundreds) identification using minute sample sizes (µg level), (2) precise protein quantification by advanced stable isotope labelling or label-free approaches and (3) the emerging concepts and techniques regarding computational integration, such as the Gene Ontology Consortium and protein-protein interaction mapping. The latter integrates the structural, genomic, and biological context of proteins and genes to predict protein interactions and functional connections in a given biological context. The same technological breakthroughs and computational integration concepts can also be applied to other low-volume oral protein complexes such as gingival crevicular or peri-implant sulcular fluids. Full article