Search Results (13,721)

Routine monitoring in racehorses requires indicators that are reproducible and practical under real training conditions. This observational study evaluated the short-term reproducibility of cardiovascular and speed indicators in French Standardbred trotters, with a particular focus on cardiac cost (CC), defined as the ratio of heart rate to speed (beats·m⁻¹). The full dataset comprised 483 sessions from 60 trotters and was used to describe age-related patterns. For reproducibility analyses, consecutive monitored sessions within the same horse were grouped into follow-up blocks when the interval between two successive sessions did not exceed 7 days. Only follow-up blocks containing at least three sessions were retained, resulting in 36 blocks, 126 sessions, and 18 horses. Each session included a warm-up, two 2000 m work blocks at increasing intensity, and recovery periods, while heart rate and speed were recorded using a Polar Team Pro system. Adjusted intraclass correlation coefficients indicated moderate reproducibility for CC during the first work block (CC B1: 0.67, 95% CI 0.48–0.78), heart rate recovery (HRR) after B1 (0.60, 0.40–0.73) and B2 (0.66, 0.47–0.78), and V150 (0.59, 0.39–0.73), whereas V180, recovery speed, and CC during B2 showed poor reproducibility. Reproducibility of CC B1 and HRR was preserved after adjustment for ambient temperature. In the full dataset, V200 increased with age, consistent with previous field-test literature. The minimal detectable change was 0.04 beats·m⁻¹ for CC B1 and 26 bpm for HRR after B1. These findings suggest that CC B1, HRR, and V150 may be useful indicators for short-term monitoring, although results should be interpreted considering the single-yard design. Full article

Rising global temperatures, increasing frequency and intensity of extreme climatic events, with associated growth of agricultural land use and urban expansion, represent critical drivers of biodiversity loss. Within this framework, urban areas are particularly vulnerable due to environmental stressors such as the heat-island phenomenon, soil sealing and depletion, and the accumulation of heavy metals and other pollutants. Recent sustainability-oriented urban policies recognize the strategic role of green infrastructures in mitigating these impacts by delivering essential ecosystem services, including phytoremediation. Here, the focus on herbaceous plants allows the selection of species with short life cycles and high colonization rates in marginal or disturbed urban habitats (e.g., roadside verges, compacted soils, and limited-volume planting areas). Therefore, the present review systematically examines herbaceous plant species with documented phytoremediation capabilities, focusing on Mediterranean native taxa evaluated under urban or peri-urban conditions. A total of 29 species met the selection criteria: taxonomically, Asteraceae represented the most frequent family (35%), followed by Fabaceae (21%), Brassicaceae, and Poaceae (each accounting for 10%). From a functional-trait perspective, hemicryptophytes dominated the dataset (66%), followed by therophytes (31%). Of the selected taxa, 55% primarily exhibited phytoextraction, 14% showed phytostabilization, and 31% demonstrated dual functionality, through combined extraction and stabilization pathways. These traits, combined with ecological adaptability to Mediterranean climatic regimes, support their application in Mediterranean urban environments. Full article

The stability of soil organic carbon (SOC) in high-latitude permafrost regions plays a critical role in the global carbon balance. However, a systematic understanding of SOC pool fractions and their response to warming across different wetland types in the Great Hing’an Mountains remains lacking. In this study, soil samples were collected from forested, shrub, and herbaceous wetlands at depths of 0–60 cm and incubated at 5, 10 and 15 °C. A three-pool first-order kinetic model was employed to analyze SOC mineralization characteristics, carbon pool fractions, and influencing factors. The results showed that SOC mineralization rates exhibited a pattern of rapid increase followed by a peak and gradual decline over time, decreased with soil depth, and increased with temperature. The mineralization potential followed the order of shrub wetlands > herbaceous wetlands > forest wetlands. The temperature sensitivity (Q₁₀) was lowest in the deep soil layer of shrub wetlands (1.2), whereas a deeper soil layer of forest wetlands exhibited the highest Q₁₀ value (3.5). Across the three wetland types, SOC was dominated by the inert carbon pool (61–72%), with forest wetlands showing the highest proportion of inert carbon (72%). The active carbon pool in shrub wetlands was most sensitive to warming, while herbaceous wetlands had the largest inert carbon stock. Soil pH was significantly negatively correlated with the inert carbon pool, whereas soil moisture content showed a significantly positive correlation. Path analysis further revealed that SOC had the largest total effect on inert carbon accumulation, whereas available nitrogen and pH showed the strongest direct associations with Q₁₀. Wetland type was indirectly associated with inert carbon stocks through its influence on soil moisture, pH, SOC, and available nitrogen. These results highlight that both direct and indirect pathways jointly influence SOC stability in permafrost wetlands. Overall, Wetland type and soil physicochemical properties jointly regulate SOC stability and its response to warming. These results suggest that although forest wetlands possess stronger carbon stability, their stable carbon pools may become increasingly vulnerable under climate warming. Full article

Brush seals, as a fundamental dynamic sealing technology in the aerospace and energy propulsion industries, require performance enhancement through instantaneous adjustment of the friction coefficient and force analysis of brush filaments. This paper establishes an instantaneous friction coefficient correction method based on the open volume between bristles and the backing plate. The downstream section of the double-row brush wire (2.6 mm) was quantitatively identified as the maximum leakage point, and it was found that the vortex characteristic length in the downstream area is approximately 1–3 times the bristle gap, with an increasing pressure ratio enhancing downstream turbulence and reducing gas leakage. A cantilever beam structural model was developed to assess the motion, force, and hysteresis properties of a single filament. Additionally, a porous medium model was utilized to elucidate the flow field and temperature distribution within the seal. The results suggest that the lag angle increases linearly over the first one-third of the brush wire’s length from the free end to the fixed end and is directly proportional to the pressure difference ΔP, reaching a maximum of 10.18°. The viscous drag causes the radial force y-component F_xy to increase and then decrease near the free end. The rear baffle contact force, F_b, shows variable peaks at two-thirds of the filament length. The displacement at the brush filament’s free end, the deflection angle, and the bending moment are directly proportional to the pressure differential. As pressure increases, the deformed region propagates toward the fixed end, and the maximum displacement at the free end of the brush wire reaches 13.04 mm. The leakage rate increases nearly linearly with ΔP and its deformation, reaching a maximum of 0.00849 m²/s. The pressure gradient growth rates of 164%, 73%, and 29% at the front baffle corner demonstrate that adding pressure chambers on front and rear baffles is optimal for high-pressure scenarios (ΔP > 0.3 MPa), while the formation of vortices between bristles and rotor reduces tip friction force and front-row turbulent disturbance, providing design guidance for extending seal service life. Full article

Thermophilic microbial inoculant (CI) has been demonstrated to optimize the green waste composting (GWC) process. The pathways through which it enhances lignocellulose degradation remain unclear. This study evaluated composting performance under four treatments: CI, effective microorganisms (EM), Phanerochaete chrysosporium (WF), and natural composting (CK). To elucidate the biological differences between efficient lignocellulose-degrading systems and CK, metagenomic analyses were conducted on CI and CK based on lignocellulose degradation rates. The results indicated that CI inoculation did not negatively affect the compost heating process and produced a nitrogen-rich, safe, and mature compost product. Compared to other treatments, CI increased the lignocellulose degradation rate by 3.66% to 31.8%. Metagenomic analysis revealed that CI inoculation enriched genes encoding glycoside hydrolases (GHs), glycosyl transferases (GTs), carbohydrate esterases (CEs), and carbohydrate-binding modules (CBMs) across multiple composting phases, positively impacting dominant carbohydrate-active enzyme (CAZyme) families including AA3, CE1, and CE7. CI inoculation also elevated the relative abundance of lignocellulose-degrading microorganisms (0.70~2.73%), simplified microbial network structure, and strengthened microbial cooperation. Within the microbial network, Chryseolinea, Protaetiibacter, and unclassified_f__Burkholderiaceae were identified as core taxa involved in lignocellulose degradation. Redundancy analysis (RDA) identified temperature as the primary factor influencing biological factors, with CI improving composting efficiency by optimizing the microenvironment. Collectively, this work provides a novel strategy for microbial inoculant application in composting and offers new perspectives for identifying core taxa, contributing to advancing composting efficiency. Full article

The aim of the study was to investigate the effect of enriching carrot slices by NFC (not from concentrate) juices from chokeberry (CH), sea buckthorn (SB), cherry (CHE) and carrot (CA) before microwave-vacuum (MVD) and freeze-drying (FD) carrot on the physicochemical and thermal properties. While water activity (AW) was not dependent on enrichment treatment but only on drying method, NFC juices significantly enriched carrot slices with biocomponents. Freeze-dried samples, as a reference, had significantly lower AW than those dried by the MVD method. Both FD and MVD-dried samples had comparable polyphenol content and DPPH antioxidant activity (AA), but the MVD-dried samples exhibited higher ABTS antioxidant activity. Carrot enrichment in chokeberry and cherry juices resulted in up to six and 10 times higher TPC than in the raw material. In addition, samples enriched in these juices and dried with FD proved to be the most stable in terms of water state and glass transition temperature (61.4 and 69.6 °C) and water activity (approx. 0.10). In FTIR analysis, all samples exhibited similar spectral shapes, indicating similar chemical composition and functional group composition. Only in the spectral region below 900 cm⁻¹ were unique molecular vibrations induced by various organic compounds present. Enriching carrot in juices and MVD can lead to increased hardness (Fmax and breaking work), although this is associated with increased crispness, resulting from the microstructure with a large number of small pores, especially in MVD samples enriched with cherry, chokeberry, and carrot juices, with scores of 8.0–8.4 In this respect, the average crispness rating of the MVD samples (7.2) exceeded that of the FD samples (6.8). If there is a requirement for crunchiness in the future production of dried vegetables as snacks, changes in hardness should be prioritized, along with color and biocomponent content. Full article

Thermal pollution in underground spaces is one of the current challenges faced by subway tunnels. Energy tunnel technology based on heat pumps can not only solve the problem of thermal pollution but also realize the resource utilization of waste heat. However, the influence mechanisms of the tunnel air environment on the heat transfer characteristics of energy segments are still insufficiently studied. Taking the shield energy tunnel as the research object, this study proposed an energy segment model based on a capillary heat exchanger and established a fluid-thermal coupled numerical model on the COMSOL 6.4 simulation platform. Then, the effects of tunnel air temperature and speed on the heat transfer performance of the energy segment were systematically investigated. The results indicate that an increase in the temperature differential between the tunnel air and the inlet water of the capillary heat exchanger significantly enhances the heat transfer rate of the energy segments. Specifically, a 5 °C rise in air temperature corresponds to a 60.7% increase in the heat extraction rate of the CHE during the heating season, whereas it results in a 58.8% decrease in the heat release rate of the CHE during the cooling season. An increase in tunnel air speed enhances the overall heat transfer coefficient by strengthening convective heat transfer between the tunnel air and the energy segment. Although the enhancement of convective heat transfer is limited, the system already demonstrates relatively optimal heat transfer performance at a wind speed of 4.61 m/s. The study further reveals that increasing these two parameters not only enhances heat exchange but also exacerbates the non-uniformity of temperature distribution across the segment. This study conducts an in-depth analysis of how tunnel environmental parameters impact the thermal performance of energy segments, thereby offering a theoretical foundation for the optimized design of these energy segments in shield tunnels. Full article

Low temperature and low irradiance (LTLI) stress severely limits strawberry growth and productivity during winter protected cultivation. This study investigated the physiological responses of the short-day strawberry cultivar ‘Benihoppe’ to individual and combined LTLI stress and developed a quantitative damage evaluation index. Seedlings were exposed to four treatments for 20 d: control (25/15 °C, 600 μmol m⁻² s⁻¹), single low temperature (LT: 15/5 °C), single low irradiance (LI: 100 μmol m⁻² s⁻¹), and combined stress (LTLI: 15/5 °C, 100 μmol m⁻² s⁻¹). Compared to isolated stress factors, combined LTLI treatment exhibited a statistically verified synergistic damaging effect (two-factor ANOVA, LT × LI p < 0.01) on leaf structure and function. LTLI-treated plants showed severe reductions in leaf area, palisade tissue thickness, chlorophyll content, and net photosynthetic rate (Pn), alongside elevated malondialdehyde (MDA) accumulation. Chlorophyll a fluorescence (OJIP) analysis revealed that LTLI stress strongly blocked the electron transport chain at the PSII acceptor side, increasing the J-step relative variable fluorescence (Vj) and suppressing the performance index (PI). To quantify these impacts, a Low Temperature and Low Irradiance Damage Index (LTLDI) was derived from 12 core physiological and morphological variables. The LTLDI scores demonstrated that LTLI induced severe damage by day 10 (score: 0.69) and extremely severe damage by day 20 (0.87), which were substantially higher than the damage caused by LT (0.58 at 20 d) and LI (0.63 at 20 d) alone. The index reliability was confirmed by its strong correlation (r > 0.9) with key stress markers (Fv/Fm, Pn, and MDA). Overall, combined LTLI stress exacerbates structural degradation and PSII photoinhibition in strawberry leaves. The proposed LTLDI offers a practical, standardized tool for evaluating stress severity, facilitating timely environmental management in greenhouse strawberry production. Full article

This study aimed to investigate the regulatory effect and cryoprotective mechanism of melatonin (MT) on the physiological functions of Lactobacillus plantarum FQR during freezing and freeze-drying. Results indicated that the addition of 5 mg/mL MT as a cryoprotectant maximized the freeze-drying survival rate to 32.04 ± 2.14%. MT effectively alleviated low-temperature and freeze-drying stress by reducing extracellular alkaline phosphatase activity, enhancing intracellular lactate dehydrogenase activity, and decreasing extracellular β-galactosidase activity without significant differences. Higher survival rates in defining medium further suggested that MT reduced damage to cell wall and membrane structures during lyophilisation, decreased membrane permeability, and preserved cellular physiological functions. In addition, MT supported cellular energy metabolism and protein synthesis, enhanced transmembrane potential to facilitate ATP transport, and helped maintain intracellular and extracellular pH balance. The prepared freeze-drying protectant containing 69.80 mg/mL exopolysaccharides (EPS) and 4.25 mg/mL MT showed better protective effects than the control group. MT also increased bound water content, lowered the freezing point of the solution, and inhibited ice crystal formation. Transcriptomic analysis revealed that amino acid biosynthesis, amino acid metabolism, and ABC transport systems were the primary pathways affected by MT treatment. These findings demonstrate that MT improves freeze-drying tolerance by maintaining membrane integrity, regulating cellular metabolism, and enhancing oxidative stress resistance. Given its natural biosynthetic origin, generally recognized as safe (GRAS) status, and absence of residual solvents or allergenic proteins, MT can be safely considered for incorporation into food and nutraceutical products. This study underscores the practical relevance of MT as a functional component in compound cryoprotectants, providing a feasible strategy to enhance the viability, stability, and industrial applicability of Lactobacillus plantarum during freeze-drying and storage. Full article

The Garisenda Tower, along with the neighboring Asinelli Tower, is arguably the symbol of the city of Bologna. They are the sole remnants of about one hundred towers that formed the city’s skyline in medieval times. As such, the monitoring of their state of health has been of great interest to the scientific community for more than a century—one example being the studies of Prof. Cavani in the early 1900s. The Garisenda Tower, famous for its impressive lean, is the object of Structural Health Monitoring (SHM) involving a multitude of devices. Some examples are a 30 m long pendulum installed on the inside of the tower to measure the planar displacement of the tower’s top; Fiber-Optical Strings (FOSs) installed in the walls of the basement to measure their vertical deformation; and piezoelectric acoustic emission (AE) sensors, also installed on the walls of the tower’s basement to detect elastic waves generated by micro-cracking. This rich experimental setup allows for the investigation of the tower’s stability and damage assessment. In this work, attention is focused on two analyses: The first is a Principal Component Analysis (PCA) study that investigates the correlation between AE data and other SHM data, such as in situ temperature, pendulum displacement, and AE rate. The second analysis corresponds with numerical finite element (FE) studies that assess damage in the base of the tower. Initially, the Smeared Cracking material model is used to understand which zones of the tower are more damaged. Moreover, a possible critical scenario due to increasing tower tilt is investigated. Finally, a viscoelastic formulation of the materials at the base of the tower is used to account for creep to understand the possible viscous effects at the base of the tower. Full article

This study investigates the influence of temperature on the bending properties, fatigue life, and breakdown voltage of glass fiber/epoxy composites (EPGF). The three-point bending tests were conducted at room temperature (RT) and 60 °C, and the bending fatigue tests were carried out under three displacement amplitudes (0.80, 0.75, 0.70). At the same time, fatigue life prediction was conducted using the Weibull distribution fitting, microscopic structure analysis by scanning electron microscopy (SEM), and breakdown voltage tests in accordance with the GB/T1408-2006 standard. The results show that at 60 °C, the ultimate bending strength and flexural modulus of EPGF decreased by 52.67% and 65.45%, respectively. At high displacement amplitudes (S = 0.80, 0.75), 60 °C leads to a sharp rise in data dispersion with the coefficient of variation (CV) surging by 1.56 and 2.32 times separately. S and temperature exert a significant synergistic degradation effect on fatigue life, and the two-parameter Weibull distribution (R² > 0.85) can well characterize the fatigue life of EPGF. In terms of dielectric properties, 60 °C reduces the initial breakdown voltage of EPGF by 4.23% (p < 0.05). Fatigue damage causes a continuous drop in breakdown voltage. At RT with 80% damage, the reduction rate increases from 16.28% to 26.95% as S rises, showing a synergistic characteristic between amplitude and fatigue damage. Moreover, 60 °C only affects the initial breakdown voltage and has no significant effect on the fatigue-induced decrease in breakdown voltage. SEM observations indicate that 60 °C induces matrix cracking, fiber curling and interfacial debonding in EPGF. This study provides key experimental data and theoretical support for the fatigue life prediction and insulation performance evaluation of EPGF under different temperature fatigue conditions. Full article

Degraded network conditions and intermittent disconnections can impair solar greenhouse Internet of Things (IoT) systems by delaying cloud-to-field control, generating burst traffic after reconnection, and disrupting alarm feedback loops. This paper proposes a resilient end–edge–cloud collaborative framework for maintaining control continuity and closed-loop alarm reliability under unstable edge–cloud communication. The framework evaluates network quality using round-trip time, packet loss rate, and consecutive no-response duration, and combines hysteresis-based state switching, control leases, edge takeover, differential backfill, and locally persistent alarm-state synchronization. During disconnection, the edge gateway uses the latest valid configuration to execute fallback local control; after reconnection, high-priority events are uploaded first through a hierarchically rate-limited recovery strategy. In the scripted simulation experiments, the proposed method reduced peak backfill throughput from 2.16 ± 0.06 MB/s to 0.69 ± 0.01 MB/s, shortened high-priority event completion time from 17.3 ± 2.7 s to 2.0 ± 0.7 s, and increased the acknowledgment success rate at 20% packet loss from 76.5 ± 2.2% to 98.4 ± 0.8%. It also reduced the maximum temperature deviation during disconnection from 7.20 °C to 3.50 °C. These results suggest that the proposed framework can improve control continuity and alarm-loop completeness under the specified simulation settings. A supplementary trace-driven recovery evaluation using public 5G testbed measurements showed a similar qualitative trend. Broader validation with field-deployed greenhouse IoT platforms or hardware-in-the-loop testbeds is still needed. Full article

The Gravity Recovery and Climate Experiment (GRACE) mascon data relies on minor gravitational field variations to map terrestrial water storage anomaly (TWSA). However, the coarse spatial resolution of three degrees by three degrees restricts their application for evaluating small-scale changes in water storage. To address this challenge, in this study, GRACE and GRACE Follow-On (GRACE-FO) data from 2003 to 2023 were downscaled to 800-m resolution across the Coastal Lowland Aquifer System (CLAS) in Texas, Louisiana, Mississippi, Alabama, and Florida. This downscaling used machine learning (ML) models, including Random Forest (RF), Artificial Neural Network (ANN), and Deep Neural Network (DNN). These models incorporated variables such as anomalies in total precipitation (APT), mean temperature (ATM), normalized difference vegetation index (ANDVI), evapotranspiration (AET) from 2003 to 2023, Shuttle Radar Topography Mission DEM, slope angle, soil type, and lithology to generate monthly 800-m TWSA maps. The ANN model showed strong predictive performance (R² = 0.869–0.989 with low RMSE), although the DNN achieved slightly better statistical accuracy and spatial evaluation metrics; however, ANN was selected for its more realistic and spatially consistent outputs regionally. Building on this improved spatial resolution, analysis of the downscaled TWSA data from 2003 to 2023 identified an overall declining trend in water storage. Trend analysis using linear regression shows that the western CLAS—particularly the Gulf Coast aquifer in Texas and western Louisiana—experiences the strongest depletion, with rates of −0.30 and −0.17 cm/year in Zones 1 and 2, respectively, with Zone 1 being statistically significant. In contrast, the eastern CLAS shows relatively stable conditions, with weak, non-significant increases (+0.05 to +0.18 cm/year), likely reflecting natural variability rather than sustained long-term gain. Therefore, ML-based downscaling of GRACE data enables high-resolution TWS assessment and provides a framework for future extraction of groundwater storage anomalies (GWSA), supporting improved groundwater management. Full article

Before launch, cryogenic propellant tanks experience a pre-pressurization stage during which their thermodynamic behavior is sensitive to operating conditions and external disturbances. For liquid hydrogen (LH2) storage tanks, small-amplitude oscillations may modify interfacial transport and phase change, thereby influencing pressure evolution and mass distribution. In this study, a computational fluid dynamics (CFD) model that accounts for gas–liquid interfacial phase change and environmental heat leakage is developed to investigate the thermodynamic response of an LH2 tank subjected to slight external oscillation during pre-pressurization. The effects of oscillation amplitude, inlet gas temperature, mass flow rate, and initial ullage gas fraction on temperature distribution, pressure development, and phase mass variation are analyzed. The results indicate that increasing the oscillation amplitude from 0.006 m to 0.014 m delays the pressurization time from 4.72 s to 5.04 s, while higher inlet temperatures (e.g., 330 K vs. 280 K) shorten the time to reach the target pressure but weaken interfacial condensation, resulting in a slower recovery of liquid hydrogen mass. Raising the inlet mass flow rate from 0.20 kg/s to 0.40 kg/s reduces the time to reach the preset pressure by approximately 56%, and larger initial ullage gas fractions (ullage height from 1 m to 6 m) significantly prolong the pressurization time and produce a wider high-temperature region. These quantitative results clarify the coupled oscillation-thermodynamic effects and can support optimization of LH2 tank operation during pre-pressurization. Full article

To elucidate the wear evolution and failure mechanisms of VL-type composite seals in aviation hydraulic actuators under multiple operating conditions, a two-dimensional plane-strain finite element model was developed for a VL seal consisting of a PTFE L-ring and an NBR O-ring. The model incorporated the Mooney–Rivlin hyperelastic constitutive law and the Archard wear model. The effects of O-ring compression ratio, hydraulic pressure, sliding velocity, and temperature on cumulative wear, wear rate, and contact state were systematically investigated. The results show that the compression ratio has a nonlinear influence on wear. Within 8–16%, the peak wear increases approximately linearly with compression ratio; above 16%, the peak wear reaches a plateau and a secondary wear zone appears, indicating a transition from single-contact to multi-contact sealing. Hydraulic pressure promotes wear over the range of 4–28 MPa, and at 28 MPa the opposite lip edge of the L-ring comes into contact with the cylinder wall, weakening the sealing effectiveness. Within 0.1–0.3 m/s, wear increases approximately linearly with sliding velocity. However, under high velocity and insufficient hydraulic pressure, the L-ring may undergo inversion, resulting in complete seal failure. Temperature exhibits a non-monotonic effect: material softening reduces local contact stress and wear from −55 to 80 °C, whereas excessive softening at 135 °C causes the peak wear rate to increase again. A parametric analysis scheme involving an increased L-ring height and thickness, a reduced O-ring cross-section diameter, and reserved deformation space raises the critical compression ratio for stable single-contact sealing from 16% to above 20%. These findings clarify the contact-stress/contact-area competition mechanism governing VL seal wear and provide guidance for the design of aviation hydraulic actuator seals. Full article